REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R005-91. 91-09-24 M. A. Frye B Changed the minimum clock period for device 02 from 45 to 40 ns. 99-07-28 Raymond Monnin Boilerplate update. ksr C Boilerplate update, part of 5 year review. ksr 05-09-29 Raymond Monnin D Boilerplate update, part of 5 year review. ksr 10-11-10 Charles F. Saffle REV SHEET REV SHEET REV STATUS REV D D D D D D D D D D D D OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY DLA LAND AND MARITIME Rick Officer COLUMBUS, OHIO 43218-3990 CHECKED BY STANDARD 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN shall be as shown in the following example: 5962- 88637 01 L A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function t PD 01 20G10 24 Pin Generic CMOS PLD 40 ns 02 20G10 24 Pin Generic CMOS PLD 30 ns 1.2.2 Case outline(s). The case outline(s) shall be as designated in MIL-STD-1835, and as follows: Outline letter Descriptive designator Terminals Package style K GDFP2-F24 or CDFP3-F24 24 flat package L GDIP3-T24 or CDIP4-T24 24 dual-in-line package 3 CQCC1-N28 28 square leadless chip carrier package 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range ------------------------------------- -0.5 V dc to +7.0 V dc DC voltage applied to Outputs in High Z state range ------------------------------------------------ -0.5 V dc to +7.0 V dc DC Input voltage ------------------------------------------- -3.0 V dc to +7.0 V dc DC program voltage -------------------------------------- +14.0 V dc Maximum power dissipation 1/ ------------------------ 1.0 W Lead temperature (soldering, 10 seconds) --------- +260C Thermal resistance, junction-to-case ( ): -------- See MIL-STD-1835 JC Junction temperature (T ) 2/ ---------------------------- +150C J Storage temperature range ----------------------------- -65 C to +150C Temperature under bias range ------------------------- -55C to +125C 1.4 Recommended operating conditions. Supply voltage range (V ) ---------------------------- +4.5 V dc to +5.5 V dc CC Ground voltage (GND) ----------------------------------- 0 V dc High level input voltage range (V ) ------------------ 2.0 V dc to V IH CC Low level input voltage range (V ) ------------------- -0.5 V dc to +0.8 V dc IL Case operating temperature range (T ) ------------ -55C to +125C C 1/ Must withstand the added P due to short circuit test (e.g., I ). D OS 2/ Maximum junction temperature may be increased to 175C during burn-in and steady state life. SIZE STANDARD 5962-88637 MICROCIRCUIT DRAWING A REVISION LEVEL SHEET DLA LAND AND MARITIME D 2 COLUMBUS, OHIO 43218-3990 DSCC FORM 2234 APR 97