5962-8865601LA E2v

REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add logic diagram. Correct the parameters in waveforms, figure 4. Update 04-01-15 Thomas M. Hess boilerplate to MIL-PRF-38535 requirements. Editorial changes throughout. - jak REV SHEET REV SHEET REV STATUS REV A A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY Jeffery Tunstall DEFENSE SUPPLY CENTER COLUMBUS STANDARD CHECKED BY COLUMBUS, OHIO 43216 Ray Monnin 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-88656 01 K A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 54FCT823A 9-bit non-inverting register with clock enable and clear, TTL compatible inputs 02 54FCT823B 9-bit non-inverting register with clock enable and clear, TTL compatible inputs 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style K GDFP2-F24 or CDFP3-F24 24 Flat pack L GDFP3-T24 or CDIP4-T24 24 Dual-in-line package 3 CQCC1-N28 28 Square chip carrier package 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. 1/ Supply voltage range........................................................... -0.5 V dc to +6.0 V dc Input voltage range.............................................................. -0.5 V dc to V + 0.5 V dc CC Output voltage range ........................................................... -0.5 V dc to V + 0.5 V dc CC DC input diode current (I ) .................................................. -20 mA IK DC output diode current (I )............................................... -50 mA OK DC output current................................................................ 100 mA Maximum power dissipation (P ) 2/ .................................... 500 mW D Thermal resistance, junction-to-case ( )........................... See MIL-STD-1835 JC Storage temperature range.................................................. -65C to +150C Junction temperature (T ) .................................................... +175C J Lead temperature (soldering, 10 seconds).......................... +300C 1.4 Recommended operating conditions. Supply voltage range (V ).................................................. +4.5 V dc to +5.5 V dc CC Maximum low level input voltage (V ) ................................. 0.8 V dc IL Minimum high level input voltage (V ) ................................ 2.0 V dc IH Case operating temperature range (T )............................... -55C to +125C C 1/ All voltages referenced to GND. 2/ Must withstand the added P due to short circuit test, e.g. I . D OS SIZE STANDARD 5962-88656 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43216-5000 A 2 DSCC FORM 2234 APR 97