REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED 06-08-30 Raymond Monnin A Boilerplate update, part of 5 year review. ksr THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 PMIC N/A PREPARED BY Kenneth S. Rice DEFENSE SUPPLY CENTER COLUMBUS CHECKED BY COLUMBUS, OHIO 43218-3990 STANDARD 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-88713 01 R A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number 1/ Circuit function t PD 01,05,09 C16L8 16-input 8-output AND-OR invert logic array 40,30,20 ns 02,06,10 C16R8 16-input 8-output registered AND-OR logic array 40,30,20 ns 03,07,11 C16R6 16-input 6-output registered AND-OR logic array 40,30,20 ns 04,08,12 C16R4 16-input 4-output registered AND-OR logic array 40,30,20 ns 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20-lead dual-in-line package S GDFP2-F20 or CDFP3-F20 20-lead flat package X CQCC2-N20 20-terminal square chip carrier package 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range --------------------------------------- -0.5 V dc to +7.0 V dc DC voltage applied to outputs in High Z ---------------- -0.5 V dc to +7.0 V dc DC input voltage --------------------------------------------- -3.0 V dc to +7.0 V dc Output sink current------------------------------------------- 24 mA Thermal resistance, junction-to-case ():------------ See MIL-STD-1835 JC Maximum power dissipation (P ) 1/--------------------- 1.0 W D Maximum junction temperature (T ) -------------------- +175C J Lead temperature (soldering, 10 seconds maximum) +260C Storage temperature range ------------------------------ -65C to +150C Temperature under bias range --------------------------- -55C to +125C 1.4 Recommended operating conditions. Supply voltage (V ) --------------------------------------- 4.5 V dc to 5.5 V dc CC High-level input voltage (V ) ----------------------------- 2.0 V dc minimum IH Low-level input voltage (V )------------------------------- 0.8 V dc maximum IL Case operating temperature range (T ) -------------- -55C to +125C C 1/ Must withstand the added P due to short circuit test, e.g., I . D OS SIZE STANDARD 5962-88713 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 A 2 DSCC FORM 2234 APR 97