REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R070-92. - JAK 92-01-13 Monica L. Poelking B Correct title to accurately describe device function. Update boilerplate to 06-08-01 Thomas M. Hess MIL-PRF-38535 requirements. Editorial changes throughout. - LTG C Add footnote 4/ for I tests in table I. jak 10-01-19 Thomas M. Hess CC REV SHEET REV SHEET REV STATUS REV B B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY Monica L. Poelking DEFENSE SUPPLY CENTER COLUMBUS CHECKED BY COLUMBUS, OHIO 43218-3990 STANDARD 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-89513 01 R A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 54FCT574 Octal D register with three-state outputs, TTL compatible 02 54FCT574A Octal D register with three-state outputs, TTL compatible 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 Dual-in-line S GDFP2-F20 or CDFP3-F20 20 Flat pack 2 CQCC1-N20 20 Square leadless chip carrier 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. 1/ Supply voltage range (V ) .......................................................................... -0.5 V dc to +7.0 V dc CC DC input voltage range (V ) ........................................................................ -0.5 V dc to V + 0.5 V dc 2/ IN CC DC output voltage range (V ) ................................................................... -0.5 V dc to V + 0.5 V dc 2/ OUT CC DC input diode current (I ) ........................................................................... -20 mA IK DC output diode current (I ) ....................................................................... -50 mA OK DC output current (I ) ............................................................................... 100 mA OUT Storage temperature range (T ) ................................................................ -65C to +150 C STG Maximum power dissipation (P ) ................................................................. 500 mW 3/ D Lead temperature (soldering, 10 seconds) ................................................... +300C Thermal resistance, junction-to-case ( ) ................................................... See MIL-STD-1835 JC Junction temperature (T ) ............................................................................. +175C J 1.4 Recommended operating conditions. Supply voltage range (V ) .......................................................................... +4.5 V dc to +5.5 V dc CC Maximum low level input voltage (V ) .......................................................... 0.8 V dc IL Minimum high level input voltage (V ) ......................................................... 2.0 V dc IH Case operating temperature range (T ) ....................................................... -55C to +125 C C Minimum setup time, Dn to CP, high or low (t ): s Device type 01 ........................................................................................ 2.5 ns Device type 02 ........................................................................................ 2.0 ns Minimum hold time, Dn to CP, high or low (t ): h Device type 01 ........................................................................................ 2.0 ns Device type 02 ........................................................................................ 1.5 ns Minimum CP pulse width, high and low (t ): w Device type 01 ........................................................................................ 7.0 ns Device type 02 ........................................................................................ 6.0 ns 1/ Unless otherwise specified, all voltages are referenced to ground. 2/ For V > 6.5 V dc, the upper bound is limited to V . CC CC 3/ Must withstand the added P due to short circuit test, e.g., I . D OS SIZE STANDARD 5962-89513 A MICROCIRCUIT DRAWING DEFENSE SUPPLY CENTER COLUMBUS REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 C 2 DSCC FORM 2234 APR 97