REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update to reflect latest changes in format and requirements. Editorial changes 05-03-01 Raymond Monnin throughout. --les B Update drawing as part of 5 year review. -jt 12-02-28 Charles Saffle C Update drawing to current MIL-PRF-38535 requirements. --rdc 18-05-22 Charles Saffle THE ORIGINAL FIRST PAGE OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY Tim H. Noh DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 STANDARD CHECKED BY 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 5962-89558 01 K A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type. The device type identify the circuit function as follows: Device type Generic number Circuit function 01 54F652 Octal transceiver/register with three-state output 1.2.2 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style K GDFP2-F24 or CDFP3-F24 24 flat L GDIP3-T24 or CDIP4-T24 24 dual-in-line 3 CQCC1-N28 28 leadless chip carrier 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range ...................................................... -0.5 V dc to +7.0 V dc Input voltage range ....................................................... -0.5 V dc to +7.0 V dc Input current range ........................................................ -30 mA to +5.0 mA Voltage applied to any output in the disabled state ....... -0.5 V dc to +5.5 V dc Voltage applied to any output in the high state .............. -0.5 V dc to VCC Current into any output in the low state ......................... 96 mA Storage temperature range ............................................. -65C to +150C Maximum power dissipation (PD) 1/ .............................. 825 mW Lead temperature (soldering, 10 seconds) ..................... +300C Thermal resistance, junction-to-case (JC) ..................... See MIL-STD-1835 Junction temperature (TJ) ................................................ +175C 1.4 Recommended operating conditions. Supply voltage (V ) ..................................................................... +4.5 V dc minimum to +5.5 V dc maximum CC Minimum high level input voltage (V ) ......................................... 2.0 V dc IH Maximum low level input voltage (VIL) .......................................... 0.8 V dc Case operating temperature range (TC) ........................................ -55C to +125C 1/ Maximum power dissipation is defined as VCC x ICC, and must withstand the added PD due to short-circuit test e.g., IOS. SIZE STANDARD 5962-89558 A MICROCIRCUIT DRAWING DLA LAND AND MARITIME REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 C 2 DSCC FORM 2234 APR 97