7705801EA E2v

REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED D Add vendor CAGE 27014. Remove vendor CAGE 07263. Device 01FX 86-03-28 M. A. Frye inactive for new design. Convert to military drawing format. Editorial changes throughout. E Technical changes in table I, table II, and 1.4. Change CAGE code to 67268. 89-02-09 M. A. Frye Delete vendor CAGE 31019. Change vendor CAGE 27014 part number from MM4640BJ/883B to CD4040BMJ/883. Editorial changes throughout. F Update boilerplate to MIL-PRF-38535 requirements. Editorial changes 03-08-19 Thomas M. Hess throughout.- LTG G Made change to paragraph 3.5. Update boilerplate to MIL-PRF-38535 05-01-14 Thomas M. Hess requirements. - LTG H Correct condition V for input voltage tests in table I. Update boilerplate to 11-08-22 Thomas M. Hess O MIL-PRF-38535 requirements. jak CURRENT CAGE CODE 67268 REV SHEET REV SHEET REV STATUS REV H H H H H H H H H OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 PMIC N/A PREPARED BY William E. Shoup DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 STANDARD CHECKED BY 1. SCOPE 1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 77058 01 E A Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 4040B CMOS, 12-bit binary counter 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line package F GDFP2-F16 or CDFP3-F16 16 Flat pack 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range ........................................................... -0.5 V dc to +18 V dc Input voltage range .............................................................. -0.5 V dc to V + 0.5 V dc DD Storage temperature range .................................................. -65C to +150C Maximum power dissipation (P ) ......................................... 500 mW 1/ D Lead temperature (soldering, 10 seconds) ........................... +300C Thermal resistance, junction-to-case ( ) ........................... See MIL-STD-1835 JC Junction temperature (T ) ..................................................... +175C J 1.4 Recommended operating conditions. Supply voltage range (V ) .................................................. +3.0 V dc to +15 V dc CC Case operating temperature range (T ) ............................... -55C to +125C C Minimum CP width, low or high (t ): W T = +25C ....................................................................... 335 ns C T = -55C, T = +125C .................................................. 503 ns C C Minimum reset pulse width (t ): WR T = +25C ....................................................................... 640 ns C T = -55C, T = +125C .................................................. 950 ns C C 1/ For T = +100C to +125C, derate linearly at 12 mW/C to 200 mW. C SIZE STANDARD 77058 A MICROCIRCUIT DRAWING DLA LAND AND MARITIME REVISION LEVEL SHEET COLUMBUS, OHIO 43218-3990 H 2 DSCC FORM 2234 APR 97