INCH-POUND MIL-M-38510/309E 10 April 2003 SUPERSEDING MIL-M-38510/309D 21 June 1985 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, LOW-POWER SCHOTTKY TTL, DATA SELECTOR/MULTIPLEXER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON Inactive for new design after 18 April 1997. This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the detail requirements for monolithic silicon, low-power Schottky TTL, data selector/multiplexer (three-state) logic microcircuits. Two product assurance classes and a choice of case outlines and lead finishes are provided for each type and are reflected in the complete part number. For this product, the requirements of MIL-M-38510 have been superseded by MIL-PRF-38535, (see 6.3). 1.2 Part number. The part number should be in accordance with MIL-PRF-38535, and as specified herein. 1.2.1 Device types. The device types should be as follows: Device type Circuit 01 Eight-input data selector/multiplexer, with enable 02 Dual, four-input data selector/multiplexer, with enable 03, 04 Quad, two-input data selector/multiplexer, with enable 05 Eight-input data selector/multiplexer, 3-state outputs with enable 06, 07 Quad, two-input data selector/multiplexer, 3-state outputs with enable 08 Dual, four-input data selector/multiplexer, 3-state outputs with enable 09 Cascadable, quad, two-input data selector/multiplexer, with storage 1.2.2 Device class. The device class should be the product assurance level as defined in MIL-PRF-38535. 1.2.3 Case outlines. The case outlines should be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line F GDFP2-F16 or CDFP3-F16 16 Flat pack X CQCC2-N20 20 Square leadless chip carrier 2 CQCC1-N20 20 Square leadless chip carrier Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAS, P. O. Box 3990, Columbus, OH 43216-5000, by using the self addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 5962 DISTRIBUTION STATEMENT A. Approved for public release distribution is unlimited. MIL-M-38510/309E 1.3 Absolute maximum ratings. Supply voltage range ............................................................................. -0.5 V to 7.0 V Input voltage range ................................................................................ -1.5 V at -18 mA to 7.0 V Storage temperature range .................................................................... -65 to +150C Maximum power dissipation (P ) 1/ D Device type 01, 02 ........................................................................... 55 mW Device type 03 .................................................................................. 88 mW Device type 04 .................................................................................. 44 mW Device type 05 .................................................................................. 66 mW Device type 06, 07 ........................................................................... 104.5 mW Device type 08 .................................................................................. 77 mW Device type 09 .................................................................................. 115.5 mW Lead temperature (soldering, 10 seconds) ............................................. 300C Thermal resistance, junction to case ( ): JC Cases E, F, X, and 2 ............................................................................ (See MIL-STD-1835) Junction temperature (T ) 2/................................................................... +175C J 1.4 Recommended operating conditions. Supply voltage (V ) .............................................................................. 4.5 V dc minimum to 5.5 V dc CC maximum Minimum high level input voltage (V ) ................................................... 2.0 V IH Maximum low level input voltage (V ) .................................................... 0.7 V IL Normalized fanout (each output) 3/ Low logic level .................................................................................. 10 maximum High logic level ................................................................................. 20 maximum Case operating temperature range (T ) ................................................. -55 to +125C C Setup time t(SETUP) type 09 data to clock ................................................. 15 ns Setup time t type 09 word select to clock ...................................... 25 ns (SETUP) Hold time t type 09 data to clock .................................................... 5 ns (HOLD) Hold time t type 09 word select to clock ......................................... 0 ns (HOLD) Clock pulse width t type 09 high or low ....................................... 20 ns P(CLOCK) 1/ Must withstand the added P due to short-circuit test (e.g., I ). D OS 2/ Maximum junction temperature shall not be exceeded except for allowable short duration burn-in screening conditions in accordance with MIL-PRF-38535. 3/ Device will fanout in both high and low levels to the specified number of data inputs on the same device type as that being tested. 2