0402ESDA-AEC1 Eaton

Effective September 2020 Technical Data 10763 Supersedes January 2018 0402ESDA-AEC Automotive grade ESD suppressor HALOGEN Applications HF Pb Infotainment and telematics FREE In-vehicle infotainment (IVI) and navigation Audio subsytems USB and Ethernet hubs Active noise cancellation (ANC) High speed data ports and interface RF Antenna Ethernet USB HDMI Automotive body electronics Central body control unit Vehicle access control system Product features Advanced driver assistance systems AEC-Q200 qualifed Rear and front view cameras Ultra-low capacitance (0.05 pF) ideal for high speed data applications Automatic parking control Provides Electro static discharge (ESD) Adaptive cruise control (ACC) protection with fast response time (<1 ns) Satellite navigation systems allowing equipment to pass IEC 61000-4-2 Level 4 test and ISO10605. Single-line, bi-directional device Ordering Low leakage current (<0.1 nA typ.) reduces Specify part number and termination suffix power consumption (e.g. 0402ESDA-AEC1) 0402ESDA-AEC=part number, 0402 (1005 metric) compact design utilizes 1=Termination suffix less board space Termination suffixes 1 (Dip termination, Packaged: Tape and reel, 10 000 parts per 7 diameter reel)Technical Data 10763 0402ESDA-AEC Effective September 2020 Automotive grade ESD suppressor Product specifications Rated Attenuation Leakage ESD capability ESD capability ESD capability voltage Clamping Trigger Capacitance Capacitance change (06 current IEC61000-4-2 IEC61000-4-2 ISO10605 ESD pulse 1 2 1,3 (V ) voltage voltage 1 MHz (pF) 1 MHz (pF) GHz) (dB) 12 V (nA) Direct discharge Air discharge Direct discharge withstand dc dc 4 Part number maximum (V) typical (V) typical typical maximum typical typical (kV) typical (kV) typical (kV) typical typical 0402ESDA-AEC 30 35 300 0.05 0.15 -0.2 <0.1 12 25 8 >1000 3. Minor shifting in characteristics may be observed over multiple ESD pulses at very rapid rate. 1. Clamping voltage: Per IEC61000-4-2, Level 4 waveform (8 kV direct 30 A) measured 30 ns after 4. Part Number Definition: 0402ESDA-AEC initial pulse. 0402ESDA= Product code and size 2. Trigger voltage: Trigger measurement made using Transmission Line Pulse (TLP) method. -AEC= Form designation Dimensionsmm in Design considerations The location in the circuit for the 0402ESDA-AEC has to be carefully determined. For better performance, the device should be placed as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD event, it is recommended to use a 0-stub pad design (pad directly on the signal/data line and second pad directly on common ground). 2 www.eaton.com/electronics