CB2-09 Eaton

Single Row Terminal Blocks A2, LP2 & CB2 Dimensions Inches (Millimeters) Specifications A2 & LP2 Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: 12-22 AWG Cu Screw Size: 6-32 zinc-plated philslot Torque Rating: 9 lb-in. Base: Standoffs standard for easy flux washing A203504 LP201204 Distance Between Barriers: 0.32 (8.1mm) Recommended PCB Hole Diameter: 0.076 (1.93mm) Operating Temperature: 105C (221F) max., -40C (-40F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 3400V (A2 & LP2) 4100V (CB2). Agency Information: UL File E62622, CSA File 47235 IEC Compliance CE Certified * 30A Rating achieved with a 10 copper wire crimped to a ring terminal. 20A Rating without ring terminal. BARRIER BARRIER & ENDS MOUNTING ENDS ONLY MOUNTING ENDS ONLY A C B C Poles Mounting Ctrs. Length Pole Ctrs. Length 02 1.13 1.56 0.38 0.81 03 1.50 1.93 0.75 1.18 04 1.88 2.30 1.13 1.56 CB2 05 2.25 2.68 1.50 1.93 06 2.63 3.06 1.88 2.31 07 3.00 3.43 2.25 2.68 CB20220407 08 3.38 3.81 2.63 3.06 09 3.75 4.18 3.00 3.43 10 4.13 4.56 3.38 3.81 11 4.50 4.93 3.75 4.18 12 4.88 5.31 4.13 4.56 13 5.25 5.69 4.50 4.93 14 5.63 6.06 4.88 5.31 15 6.00 6.43 5.25 5.68 16 6.38 6.81 5.63 6.06 17 6.75 7.18 6.00 6.43 18 7.13 7.56 6.38 6.81 19 7.50 7.93 6.75 7.18 20 7.88 8.31 7.13 7.56 21 8.25 8.68 1.50 7.93 22 8.63 9.06 7.88 8.31 23 9.00 9.43 8.25 8.68 24 9.38 9.81 8.63 9.06 25 9.00 9.43 26 9.38 9.81 A2 & LP2 Single Row Terminal Blocks Part Numbering System Family Terminal Style Base/End Poles Screw Options Options A2 - standard barrier 01* - handwired 1 - std. base/ 02 to 26 Barrier end Blankstd. screws AB* - angle mnt. options (pg mnt. end 11) LP2 - low profile barrier 02 - printed circuit 02 to 24 Mount end 00 - screws shipped A1 to A9 - 0.250 QC 2 - std. base/ bulk 03 - non feed-thru B1 to B9 - 0.187 QC barrier end on 03* - stainless steel DR* - drilled right angle 04 - wire wrap tail mount (pg 11) 04 - brass nickel-plated 06 - handwired 3 - insulator L1 to L6 marking options 07 - steel SEMS*** base/mnt. end (pg 25) 07 - extended pin MP* mounting plates (pg 11) 09* - brass SEMS 4 - insulator 08 - printed circuit R30 to R75 - right angle nickel-plated*** base/barrier end 09 - 0.250 QC short bends (pg 11) CA** - captive screw 5 - closed base/ S1* - solder lug/flat 10 - 0.187 QC mount end WR* - wire ready Covers - (pg 26) 14 - printed circuit 6 - closed base/ molded mount 19 - 0.250 QC long end Base/End Note: 5 & 6 Styles only available with 03 * A2 only. terminals. ** Not compatible with 03-stainless steel screws. *** SEMS screws not available with hardware options Terminal Styles Inches (Millimeters) EATON www.eaton.com 9