BUSSMANN Effective August 2018 Technical Data 1161 Supersedes April 2017 SERIES CUBEFuse Compact Circuit Protector Base (cat. no. CCP2B) Features 2011/65/EU Uses finger-safe, current-limiting Class CF CUBEFuse with Class J performance available in time-delay or fast-acting versions from 1 to 100 amps Patented amp rating rejection feature helps prevent overfusing High 200 kA short-circuit current rating Disconnect rated to provide a means for load isolation 2- and 3-pole versions straight voltage rated at 600 Vac Up to 125 Vdc ratings UL 98 Listed for branch circuit disconnect 1-, 2- and 3-pole versions are horsepower rated UL and cULus Listed Open fuse indication lamp per pole speeds troubleshooting Additional open fuse indication can be provided by using the time-delay indicating CUBEFuse in ratings from 6 to 100 amps Built-in switch/fuse interlock prevents removing or installing a fuse while energized Permanent lockout/tagout and lock-on provision using a 1/4 lock Description The revolutionary Bussmann series Compact Circuit Protector Base (CCP2B) with CUBEFuse is a UL 98 horsepower rated fused branch circuit disconnect. Primarily used in the Bussmann series Quik-Spec Coordination Panelboard, the CCP2B with CUBEFuse simplifies selective coordination for code compliance and features a lockout/tagout feature for isolating individual branch circuit loads to promote safe work practices.Technical Data 1161 CUBEFuse Compact Circuit Protector Base (CCP2B) Effective August 2018 Specifications: Switch amp ratings and rejection breaks 15, 20, 30, 40, 50, 60, 70, 90 and 100 A Poles 1-, 2- and 3-poles Volts 347 Vac (1-pole switches) 600 Vac (2- and 3-pole switches) 1-Pole 2-Pole 3-pole 125 Vdc* CCP2B-1- CF CCP2B-2- CF CCP2B-3- CF * Switch amp rating and installed fuse amp rating dependent, see catalog number table for details. Agency information Lineside bolt-on UL 98 Listed, Guide WHTY, File E302370 bus connector cULus to Canadian Standard 22.2 No. 4, Guide WHTY7, File E302370 RoHS compliant CE Lineside bolt-on bus connector and torque Switch ON and OFF Bolt-mounted design fits into Quik-Spec Coordination Panelboard symbols bus 10-32 UNC hex flange Phillips screw 2.8 Nm (25 lb-in) Loadside box lug terminal conductor data Lockout/tagout provision See conductor table for details Loadside fork terminal Switch handle Max. 30 A suitable for use with: 10-24 screw for switches up to 60 A Local open fuse 1/4-28 screw for switches from 70 to 100 A indication light Lockout/tagout 1/4 lock CUBEFuse base Local open fuse indication light Light illumination requires closed circuit and minimum 90 volts Carton quantity and shipping weight Item Poles lbs (kg) up to 60 amp switches 6 1.7 (0.77) 70 to 100 amp switches 6 2.6 (1.18) Environmental data Storage and operating temperature -20C to 75C** Loadside Loadside ** For fuse performance under or above 25C, consult fuse performance derating box lug fork charts. terminal terminal Available Bussmann series fuses UL fuse class Type/description Volts Data sheet no. Indicating time-delay, Low- Peak CUBEFuse (6-100 A) 600 Vac/ 9000 300 Vdc Non-indicating time-delay, CF Low-Peak CUBEFuse (1-100 A) Non-indicating fast-acting 600 Vac/dc 2147 CUBEFuse (1-100 A) 2 Eaton.com/bussmannseries