Auxiliarycontact,forFAZ,PKNM,1N/O+1N/C,0.5HP Partno. FAZ-XHIN11 Articleno. 286054 CatalogNo. FAZ-XHIN11 Deliveryprogram Basic function Accessories for miniature circuit-breaker Basic function accessories Auxiliary contacts Product range Accessory Contact sequence Technicaldata Electrical Contact function 1 NO + 1 NC Rated operational voltage U V AC 250 e Rated frequency f Hz 50/60 Rated current I A 6 e Conventional free air thermal current I A 6 th Rated operational current AC--13 250 V I A 3 e AC-15 I A 2 (250 V AC) e AC-12 I A 3 (250 V AC) e DC-13 I A 0.5 (110 V DC) e Rated insulation voltage U V AC 250 i Minimum operating voltage per contact U V DC 5 min Rated impulse withstand voltage U kV 2.5 imp Rated conditional short-circuit current With 6 A back-up fuse I kA 1 sc Max. admissible back-up fuse A gL Max. admissible back-up fuse A gL 6 Mechanical Standard front dimension mm 45 Enclosure height mm 80 Mounting width mm 8.8 (0.5 space unit) Mounting max. 2 x on MCB Degree of protection Integrated IP40 Terminal protection Protection against electric shock to IEC 536 Terminals Lift terminals 2 Terminal capacities mm 2 Solid 0.5 2.5 mm 2 flexible 0.5 2.5 mm Tightening torque of terminal screws Nm 1.2 04/12/2017 286054 - HPL-ED2017 V31.0 EN 1 / 3DesignverificationasperIEC/EN61439 Technical data for design verification Rated operational current for specified heat dissipation I A 0 n Heat dissipation per pole, current-dependent P W 0 vid Equipment heat dissipation, current-dependent P W 0 vid Static heat dissipation, non-current-dependent P W 0 vs Heat dissipation capacity P W 0 diss Operating ambient temperature min. C -5 Operating ambient temperature max. C 40 0 TechnicaldataETIM6.0 Devices for distribution board-/surface mounting (EG000062) / Auxiliary contact unit for distribution board (EC001286) Electric engineering, automation, process control engineering / Electrical installation, device / Breaker switch component / Auxiliary contact unit for distribution board (ecl ss8.1-27-14-35-02 AKE327010 ) Device fitting Universal Additional equipment Auxiliary switch Attached at delivery No Assembly width (TE) 0.5 Number of normally open contacts 1 Number of normally closed contacts 1 Number of change-over contacts 0 Number of fault-signal switches 0 Rated switch current A 3 Nominal rated voltage V 230 Control voltage type AC With autotest for earth leakage function No Suitable for max. number of poles main contact unit (total) 2 Suitable for max. current main contact unit A 0 Approvals Product Standards IEC/EN 60947-2 IEC/EN 60898 UL 1077 CSA-C22.2 No. 235 CE marking UL File No. E177451 UL Category Control No. QVNU2, QVNU9 CSA File No. CSA Class No. 3215-30 North America Certification UL recognized, certified by UL for use in Canada Degree of Protection IEC: IP20 UL/CSA Type: - 04/12/2017 286054 - HPL-ED2017 V31.0 EN 2 / 3