HC7 Series HIGH CURRENT 7 Power Inductors Description RoHS 2002/95/EC 155C maximum total temperature operation Surface mount inductors designed for higher speed switch mode applications requiring lower inductance, low voltage and high current Design utilizes high temperature powder iron material with a non-organic binder to eliminate thermal aging Inductance range from 0.22 uH to 4.81 uH Current range from 35.8 to 9.8 Amps Frequency range 1kHz to 500kHz Applications Next generation microprocessors High current DC-DC converters VRM, multi-phase buck regulator Packaging PC, Workstations, Routers Supplied in tape and reel packaging, 610 parts per reel Telecom soft switches, Base Stations Environmental Data Storage temperature range: -40C to +155C Operating ambient temperature range: -40C to +155C (range is application specific) Solder reflow temperature: +260C max. for 10 seconds max. Part Rated OCL (1) Irms (2) Isat (3) Isat (4) DCR (m) Volts (5) Number Inductance nominal Amperes Amperes Amperes max. Sec H +/-20% H (Typ.) 15% rolloff 30% rolloff 20C (VS) HC7-R20-R .20 0.220 35.80 45.8 86.5 0.67 2.27 HC7-R47-R .47 0.534 23.40 27.5 51.9 1.60 3.83 HC7-1R0-R 1.0 1.05 20.30 19.6 37.1 2.10 5.36 HC7-1R5-R 1.5 1.73 14.20 15.3 28.8 4.30 6.90 HC7-2R2-R 2.2 2.58 13.00 12.5 23.6 5.20 8.40 HC7-3R9-R 3.9 3.61 10.40 10.6 20.0 7.90 10.0 HC7-4R7-R 4.7 4.81 9.80 9.2 17.3 9.00 12.6 1) Test Parameters: 100KHz, 1.0Vrms Units supplied in tape and reel packaging. 13 reels 610 parts per reel. 2) Irms Amperes for approximately T of 40C above 85C ambient Carrier tape width = 24 mm. Meets EIA standard 3) Isat Amperes Peak for approximately 15% rolloff ( 20C) 4) Isat Amperes Peak for approximately 30% rolloff ( 20C) Part number definition: 5) Applied Volt-Time product (V-S) across the inductor. This value represents the HC7-XXX-R applied V-S at operating frequency necessary to generate additional core loss HC7 = Product code and size which contributes to the 40C temperature rise. De-rating of the Irms is required XXX = Inductance value in uH. to prevent excessive temperature rise. The 100% V-uS rating is equivalent to a R = Decimal point. If no R is present, third character = of zeros ripple current Ip-p of 20% of Isat (30% rolloff option). -R suffix indicates RoHS compliant It is recommended that the temperature of the part not exceed 155C under worst case operating conditions verified in the end application. Mechanical Diagrams FRONT VIEW TOP VIEW C L SIDE VIEW Height Maximum Dimension 3.0 0.25 Max Length (2x) Max Part Number Height mm Length mm HC7-XXX HC7-R20-R 6.0 14.25 wwllyy R 2.60 max 5.10 HC7-R47-R 5.5 13.8 0.40 13.0 HC7-1R0-R 5.5 13.8 Max HC7-1R5-R 5.5 13.8 RECOMMENDED PCB PAD LAYOUT HC7-2R2-R 5.5 13.8 SCHEMATIC 3.50 typ HC7-3R9-R 5.5 13.8 2plcs 1 HC7-4R7-R 5.5 13.8 3.50 typ 2plcs Dimensions in Millimeters. All dimensions I+/- 0.2 mm unless otherwise specified. All soldering surfaces are coplanar within 0.15 mm. 2 6.50 typ wwllyy = Date code R = Revision levelHC7 Series HIGH CURRENT 7 Power Inductors 4.0 Packaging Information 1.5 dia 2.0 +0.1/-0.0 1.5 dia A min 1.75 1 A0= 13.00 mm 11.5 A1= 4.00 mm B0= 13.00 mm 24.0 HC7-XXX +/-0.3 B1= 14.10 mm B0 B1 wwllyy R K0= 5.6 mm K1= 6.0 mm 2 K0 16.00 K1 A1 A SECTION A-A A0 User direction of feed Dimensions in Millimeters Core Loss Irms DERATING WITH CORE LOSS % of Applied Volt-u-Seconds 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 0 10 20 100kHz 30 200kHz 40 50 300kHz 60 400kHz 70 500kHz 80 90 100 Inductance Characteristics Inductanc vs.e Idc 5 4.5 4 HC7-R20 3.5 HC7-R47 3 HC7-1R0 L 2.5 HC7-1R5 (uH) HC7-2R2 2 HC7-3R9 1.5 HC7-4R7 1 0.5 0 0 6 12 18 24 30 36 42 48 54 60 66 72 78 84 DC CURRENT (A) PM-4116 3/07 Visit us on the Web at www.cooperbussmann.com 1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487 Cooper Electronic Technologies 2007 Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640 This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. % of Irms specified from zero ripple application (maximum)