SPECIFICATIONS AND ORDERING INFORMATION
C1 - SERIES
0.865" WIDE 0.25 AMP @ 28 VDC
The C1 Series is our smallest enclosed rotary switch, offering index angles of
30, 60, and 90. Standard designs utilize solder lug or vertical PC
terminals and diallyl phthalate insulation.
C
SPECIFICATIONS
ELECTRICAL MECHANICAL
Current and Voltage Rating: Make and break resistive load Materials and Finishes: All parts utilize non-corrosive materials
0.25 amp @ 28 VDC; 0.1 amp @ 125 VAC. as standard.
Current Carrying Capacity: 6 amps. Terminals and Contacts: Brass with silver plate as standard.
Dielectric Strength: 600 VAC between current carrying parts and Insulation: Diallyl phthalate.
ground. Index: Dual-ball, hill and valley.
Contact Resistance: Average initial 5 milliohms. Index Life: 25,000 cycles minimum.
Insulation Resistance: In excess of 10,000 megohms. Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: 30 standard, 60, and 90 available.
Hardware: Mounting nut and lockwasher are shipped assembled. Index Stops: Fixed standard, adjustable, or continuous available.
Stop Strength: 8 in. lbs. minimum.
STANDARD PART NUMBER
SOLDER LUG - ADJUSTABLE STOPS VERTICAL P.C. TERMINALS - ADJUSTABLE STOPS
SWITCHES - 30 INDEXING - STOPS SET @ 2 POS. SWITCHES - 30 INDEXING - STOPS SET @ 2 POS.
ACTIVE POLES/ NO. OF SHORTING NON- FIG. ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS DECK DECKS SHORTING POLES POSITIONS DECK DECKS SHORTING
* *
01 02-12 1 1 C1D0112S - A C1D0112N - A CA 01 02-06 1 1 C1D0106S - VA C1D0106N - VA CB
02 02-12 1 2 C1D0212S - A C1D0212N - A CA 01 02-12 1 1 C1D0112S - VA C1D0112N - VA CC
02 02-06 2 1 C1D0206S - A C1D0206N - A CH 02 02-06 1 2 C1D0206S - VA C1D0206N - VA CB
03 02-12 1 3 C1D0312S - A C1D0312N - A CA 02 02-12 1 2 C1D0212S - VA C1D0212N - VA CC
03 02-04 3 1 C1D0304S - A C1D0304N - A CK 03 02-06 1 3 C1D0306S - VA C1D0306N - VA CB
04 02-06 2 2 C1D0406S - A C1D0406N - A CH 03 02-12 1 3 C1D0312S - VA C1D0312N - VA CC
06 02-04 3 2 C1D0604S - A C1D0604N - A CK 04 02-06 1 4 C1D0406S - VA C1D0406N - VA CB
06 02-06 2 3 C1D0606S - A C1D0606N - A CH 04 02-12 1 4 C1D0412S - VA C1D0412N - VA CC
FIGURES ARE SHOWN ON PAGE 55.
*
DIMENSIONS
C1D C1D
SOLDER LUG CONSTRUCTION V VERTICAL P.C. CONSTRUCTION
NOTE:
1. ADD .200 FOR EACH ADDITIONAL DECK.
2. 12 FIXED POSITION USES ADJUSTABLE STOP DIMENSIONS.
2010 Yonkers Road
Raleigh, NC 27604
ELECTRONIC PRODUCTS
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or (919) 833-0707
6 Fax: (800) 909-9171 or (919) 833-8016ADDITIONAL OPTIONS AND ORDERING INFORMATION
C1 - SERIES
How to Order Additional Options:
2 DIGIT INSULATION TOTAL ACTIVE CONTACT TERMINAL INDEX STOP SHAFT/ SHAFT
SERIES TYPE POLES POSITIONS TYPE TYPE ANGLE TYPE BUSHING FLAT
C1 D - DIALLYL 01 - MIN. 12 - MAX @ 30 N- NON- L- SOLDER LUG 30 F- FIXED
06 - MAX @ 60 SHORTING V- VERT. P.C. 60 C- CONT.
04 - MAX @ 90 S- SHORTING 90 A- ADJ.
SEE SEE
R- REAR P.C. 30 F- FIXED CHART CHART
C
60 C- CONT.
90
CUSTOMERS SPECIFIED ORDER NUMBER FOR STANDARD OPTIONS ADDITIONAL OPTIONS
C1 D
(SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY) (SPECIFY)
SHAFT, BUSHING, AND FLAT OPTIONS
ADJUSTABLE STOP
MECHANISM
SHAFT AS VIEWED WITH NON-TURN
LUG AT 9 O'CLOCK AND SHAFT IN EX-
TREME CCW POSITION AND STRUT
BOLTS ORIENTED VERTICALLY.
STOP
PINS
W
U
Y
Z
PRINTED CIRCUIT BOARD TERMINAL OPTIONS
REAR P.C. FIXED STOP CONSTRUCTION P.C. BRD. PATTERN
R
CUSTOM SWITCHES ARE AVAILABLE. CONTACT THE FACTORY WITH YOUR COMPLETE SPECIFICATIONS.
2010 Yonkers Road
Raleigh, NC 27604
ELECTRONIC PRODUCTS
UNIT OF ELECTRO SWITCH CORP.
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
7