Embedded Artists iMX6 UltraLite COM Board rev A The Art of Embedded Systems Development made Easy Document status: Preliminary iMX6 UltraLite COM Board Feature Highlights NXP ARM Cortex-A7 i.MX 6UltraLite 528 MHz 0.5 GByte DDR3L 800 MT/s, 16-bit databus 4 GByte eMMC on-board Flash 24-bit parallel RGB graphical output 2D graphical acceleration Dual 10/100 Mbps Ethernet with on-board PHY USB, CAN and many more interfaces Low-power consumption Linux BSP 82 x 50 mm small form factor Long term availability Introduction The iMX6 UltraLite COM Board provides a quick and easy solution for implementing a high-performance ARM Cortex-A7 based design. The system is ideal for running an OS like Linux. The design has a low-power implementation with DDR3L memory and a PMIC supporting DVFS techniques, making the board ideal for portable applications. Other typical applications are graphical interface solutions (GUI/HMI), point-of-sale, communication solutions like telemetric and IoT gateways, access control and connected real-time systems. Specification Processor Cores NXP ARM Cortex-A7 i.MX 6UltraLite Frequency 528 MHz on Cortex-A7 Memory SDRAM 0.5 GByte DDR3L 800 MT/s, 16-bit databus NAND FLASH 4 GByte eMMC NAND Flash for OS and bootloader Graphics Parallel RGB 24-bit, up to WXGA (1366 x 768 px) at 60 Hz output Graphics Engines Pixel Processing Pipeline (PXP) supporting 2D image processing Graphics input Digital CMOS sensor interface (camera), parallel interface Ethernet Dual 10/100 Mbps Ethernet interface based on Micrel KSZ8081 Ethernet PHY I/O USB 1x USB2.0 OTG, 1x USB2.0 Host (all functions UART, SPI, I2C, Audio 8x UART, 4x SPI, 4x I2C, 3x I2S/SSI, S/PDIF TX/RX are not CAN 2x CAN bus 2.0B available at the GPIO Up to 99 pins and 8 pins for keypad same time) Memory card 1x SD/MMC 4.5 ADC 10ch 12-bit resolution Other RTC i.MX 6UltraLite on-chip RTC Watchdog On-board watchdog functionality Power Management (PMIC) PMIC (MMPF3000) supporting DVFS techniques for low power modes Power Supply voltage +3.3V Power consumption TBD Environment Operating Temperature 0 - 70 / -40 - 85 Operating Humidity 5 - 90% relative humidity, non-condensing Mechanical Dimensions (W x D) 82 x 50 mm, same as SMARC form factor but different pinning for better carrier board routing Connectors 314 pos MXM3 edge connector, 0.5 mm pitch 10 pos 0.5 mm pitch FPC for JTAG Embedded Artists AB Phone/Fax: +46 (0)40-611 00 93 Copyright 2020 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are Jrgen Ankersgatan 12 Embedded Artists iMX6 UltraLite COM Board rev A The Art of Embedded Systems Development made Easy Document status: Preliminary Block Diagram JTAG DDR3L Memory (16 bit data bus) connector NXP i.MX 6UltraLite Parameter SD2 with ARM Cortex-A7 eMMC Flash storage 528 MHz Optional QSPIA QSPI Flash I2C 0 PMIC Dual 10/100 Mbps Boot 3.3V input Ethernet-PHY control MXM3 connector (314 pins) Ordering Information 1 Part No. CPU SDRAM eMMC QSPI Ethernet Pinning Supply Operating Voltage Temperature EAC00252 MCIMX6G2DVM05AA 0.5 GByte 4 GByte Not Dual EACOM 3.3V 0 - 70 C DDR3L mounted 10/100 Mbps board spec EAC00275 MCIMX6G2CVM05AA 0.5 GByte 4 GByte Not Dual EACOM 3.3V -40 -85 C DDR3L mounted 10/100 Mbps board spec 1 Standard configurations listed. Others on request. Support Highlights Development Kit Embedded Artists is a reliable and competent partner The iMX6 UltraLite COM Board is supported by the iMX6 - we help you become successful UltraLite Developer s Kit V2 that provides a quick path to get started with development and integration work. Professional and responsive support The kit provides reference implementations of key interfaces. Pre-designed standard Carrier boards for integration Ordering part No. EAK00343 Custom Carrier board design Customization o Different pinning, supply voltage, memory sizes, etc o Single Board Computer (SBC) solutions Display solutions Mechanical solutions Schematic review of customer carrier board designs Driver and application development Disclaimer: Embedded Artists reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. Embedded Artists AB Phone/Fax: +46 (0)40-611 00 93 Copyright 2020 Embedded Artists AB. All rights reserved. All other products or service names mentioned herein are Jrgen Ankersgatan 12