TROPO 15W Dimmable LED Driver Features STRATO LED Drivers 35W, Single output TROPO switch mode power supply technology is designed to generate one constant current output from an AC input, and work with industry standard lighting controls in dimming applications. Features 120VAC and 230VAC Inputs Available STRATO switch mode driver technology is designed to generate one constant current output from a wide Output current availability 0.35A-1.5A. Consult Factory range AC input. The size and performance of these products make them the ideal choice for LED lighting applications. for customized programming Operates with Industry Standard Dimmers Wide Range Input: 120, 240, or 277 VAC Compact Encapsulated Assembly Constant Current Output for Powering LEDs Directly Hi gh EffiActicive encPower y ~90% Factor Correction Compact Design Output Over-Voltage, Over-Current and Short-Circuit ERM050 40-50 W Adjustable Output Current Settings Protection and Auto Recovery Dimmable with (0-10VDC) Input High Temperature Operation (up to 90C case) Temperature Protection for LEDs ERM060 51-70 W UL Approved, ENEC Approved, CE Mark Convection Cooled Long Life Long Life ROHS Compliant Wide Temperature Range ROHS Compliant High Power Density Constant Current LED Drivers Applications and Benefits with 0-10 V DimTROPO mis idesnigned g for powering LED luminaries with standard lighting controls. The modul es operate with: Standard Light Switches STRATO is designed for directly powering LEDs in commercial & industrial lighting applications. Triac based Incandescent Dimmers (Standard phase leading edge) Input& Max.&Output& Output& Output& Max.&Case& Power& Diming& Dimming& Electronic Low Voltage Dimmers (Reverse Phase trailing edge) The products extremely small form factor and high efficiency makes it suitable for integration into most Efficiency &THD Voltage Power Voltage Current Temperature Factor Method Range light fixtures and standard electrical junction boxes. TROPO is ideal for installations requiring dimmable Class 2 outputs such as: 90C 120 & 277 21 to 82 700 mA to 90% A host of integrated control features: 10 E 100% 72 W (measured at < 20% > 0.9 0E10 V Simplify Light Fixture Design Vac nominal Vdc 2.1 A CC typical (% of Iout) Commercial Lighting Residential Lighting hot spot) Ease Safety Approval Cycles CC: Constant Current Lower Fixture Complexity and Cost The following diagram depicts a typical installation utilizing the TROPO: 0-10 V + Dim +Dim Commercial Wall Dimmer Dimmer Dimmer (0-10VDC) Source PRODUCT DESCRIPTION -Dim -Dim Or Variable Resistor STRATOs versatile control features: STRATO The ERM series of LED drivers is ideally suited for new Dimming range down to less then ERM060 LED Module LED Driver A Temperature sensor (NTC Triac 10% nominal output current commercial, office, industrial and outdoor LED lighting + LEDs thermistor) protects the LED from + LED AC Based Output current does not terminate AC over-temperature. applications. These extremely compact and efficient devices Dimmer ~ during off time of dimmer Input Input A 2 wire Dimming Output inpuCurrent t provides factory both settable up feature flicker-free dimming using a 0-10 V control signal, NTC output trimming, and 10-100% Iout to 1.5A Temp. Dimming function. universal AC input with power factor correction, and worldwide Temp SensinTsg TROPO Multiple Drivers / LED Assemblies Sensor Input safetyapprovals may be connected to a single dimmer Facilitates compliance with Energy -LE-LDEsD Star ratings for LED luminares FEATURES APPLICATION DIAGRAM 3 Very high efficiency of 90% and high power density of 8.2W/in Compatible with 0-10 V dimmers 120 and 277 Vacnominal input voltage Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: FCC CFR Title 47 Part 15 compliant with Class B at 120 Vacand Class A at 277 Vac Enables ENERGY STAR and DLC (DesignLight Consortium) luminaire compliance IP64-rated metal case with silicone-based potting 90C maximum case hot spot temperature 50,000 hours lifetime METAL CASE: Class 2 power supply L 81.5 x W 56.2 x H 31.5 mm Double-insulated power supply between input and output (L 3.21 x W 2.21 x H 1.24 in) (class II) Worldwide safety approvals Purple: + Dim White: Neutral Grey: -Dim APPLICATIONS LED Red: + LEDs High Bay Lights DRIVER Black: Line Black: -LEDs Troffers Outdoor LED Lighting Orange: Temperature Sensor Office LED Lighting Input (NTC thermistor) Industrial LED Lighting WIRING DIAGRAM ERM Series Data sheet 1 ERP -ENERGY RECOVERY PRODUCTS August 29, 2015 -Rev. B ERM050 40-50 W ERM060 51-70 W High Power Density Constant Current LED Drivers with 0-10 V Dimming 1 - INPUT SPECIFICATION ( 25C ambient temperature) Units Minimum Typical Maximum Notes 90 120 132 Input4Voltage4Range4(Vin) Vac 240 277 305 Input4Frequency4Range Hz 57 60 63 At1nominal1input1voltage1and1nominal1LED1load1 Power4Factor4(PF) 0.9 >10.9 (nominal1Vout) 0.81A1 11201Vac Input4Current A D D 0.41A1 12771Vac Inrush4Current A 501A1peak At1any1point1on1the1sine1wave1and125C 2501A1 112011Vac Leakage4Current A Measured1per1IEC60950D1 6001A1 127711Vac Input4Harmonics Complies1with1IEC61000D3D21for1Class1C1equipment At11nominal1input1voltage1and1nominal1LED1load Total4Harmonics4Distortion4 11(nominal1Vout) 20% (THD) Complies1with1DLC1(DesignLight1Consortium)1 111technical1requirements Efficiency D 90% D At1nominal1input1voltage Isolation Meets1UL60950D11for1class1II1reinforced/double1insulation1power1supply 2 - OUTPUT SPECIFICATION ( 25C ambient temperature) Units Minimum Typical Maximum Notes Vdc 21 82.0 Output4Voltage4(Vout) See+ordering+information+for+details Output4Current4(Iout) mA 700 2100 See+ordering+information+for+details Output4Current4Regulation % :5 2.5 5 Includes+AC+line+voltage,+load,+and+current+set+point+variations The driver does not operate outside of the regulation requirements for more than Output4Current4Overshoot % : : 10 500+ms+during+power+on+with+nominal+LED+load+(nominal+Vout). At+nominal+input+voltage,+nominal+LED+load+(nominal+Vout)+and+with+no+dimming <+22.5%+peak:to:peak+of+rated+ Models+with+an+output+voltage+greater+than+60+V+may+have+ripple+currents+up+to Ripple4Current output+current ++30%+peak+to+peak+of+the+rated+current,+depending+on+the+LED+load. Calculated+in+accordance+with+the+IES+Lighting+Handbook,+9th+edition. 10% 100% Dimming4Range4(%4of4Iout) The+dimming+range+will+be+dependent+on+each+specific+dimmer. The outputcurrent is within the regulation band,within 500ms of AC powerbeing 500 applied, without dimmer attached and at nominal input voltage and nominal load (nominal+Vout). StartDup4Time ms The outputcurrentis withinthe regulationband,within 1500ms of AC power being 1500 applied,+with+10%+dimming+attached+and+at+nominal+input+voltage+and+nominal+load+ (nominal+Vout). Output4Controls A dimming input can be used to adjust the output setting via astandard commercial wall dimmer, an external control +Dim,4DDim voltage source (0 to 10 Vdc), or a variable resistor when using the recommended number of LEDs. The dimming input permits+10%+to+100%+dimming.+The+voltage+on+the++Dim+input+must+be++10V. The temperaturesensinginput pinmay beconnectedtoa 100k NTC (negative temperature coefficient) thermistor. The thermistor should be located on the LED assembly to monitor its temperature. If the temperature exceeds a Temperature4Sensing4Input predetermined (80C) set point, the output current of the LED driver module is automatically reduced to regulate the temperature+of+the+LED+at+a+safe+level. SaveEnergy ERPpowerllc.com 2 www.ERPpowerllc.com