TROPO 15W Dimmable LED Driver Features TROPO switch mode power supply technology is designed to generate one constant current output from an AC input, and work with industry standard lighting controls in dimming applications. 120VAC and 230VAC Inputs Available Output current availability 0.35A-1.5A. Consult Factory for customized programming Operates with Industry Standard Dimmers Compact Encapsulated Assembly Active Power Factor Correction 3-10 W Output Over-Voltage, Over-Current and Short-Circuit ESS010 Protection and Auto Recovery 11-15 W ESS015 High Temperature Operation (up to 90C case) UL Approved, ENEC Approved, CE Mark 16-20 W ESS020 Long Life 21-30 W ROHS Compliant ESS030 ESS040 31-40 W TROPO is designed for powering LED luminaries with standard lighting controls. The modules operate with: Tri-Mode Dimming (0-10 V & TRIAC/ELV) Standard Light Switches Triac based Incandescent Dimmers (Standard phase leading edge) Constant Current LED Drivers with Fast Startup Time Electronic Low Voltage Dimmers (Reverse Phase trailing edge) Max.( TROPO is ideal for installations requiring dimmable Class 2 outputs such as: Nominal(Input( Output( Output( Max.(Case( Power( Dimming( Startup( Output( Efficiency (THD Dimming(Method Voltage Voltage Current Temperature Factor Range Time Power Commercial Lighting Residential Lighting 250 mA 90C ForwardIPhase, 120 to 277 Vac, 6 to 56 87% 1 I 100% 40 W to 2.1 A (measured at < 20% > 0.9 ReverseIPhase 300 ms 220 to 240 Vac Vdc typical (% of Iout) CC the hot spot) & 0 I 10V The following diagram depicts a typical installation utilizing the TROPO: CC: Constant Current TRIAC Dimmer PRODUCT DESCRIPTION + Dim Dimmer - Dim Dimming range down to less then The ESS series of LED drivers is ideally suited for LED Triac 10% nominal output current + LEDs lighting applications in office, commercial and residential. 0-10 V Based Output current does not terminate Dimmer Dimmer These devices are compatible withmostindustrystandard during off time of dimmer Output Current factory settable up phase-cut wall-based dimmers, both forward-phase ESS to 1.5A (leading-edge) and reverse-phase (trailing edge), and 0- TROPO Multiple Drivers / LED Assemblies series may be connected to a single 10V wall-based dimmers and offer deep dimming from dimmer 100%downto1%. Facilitates compliance with Energy - LEDs Star ratings for LED luminares FEATURES TYPICAL APPLICATION DIAGRAM Compatible with TRIAC (forward-phase or leading-edge), ELV (reverse-phase or trailing-edge) and 0-10 V dimmers ESSxxxW models: TRIAC and ELV dimming only at 120 Vac. ESSxxxEmodels: ELV dimming only at 230 Vac. Linear 0-10V dimming transfer function: 10V=100%, 1V=10%, 0.1V=1% Lifetime: 109,000 hours at 70 C case hot spot temperature (57 C ambient temperature) for ESS030W-0620-42 (26 W) Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 15 Class B (120 Vac)/Class A (277 Vac) and EN55015 (CISPR 15) at 220/230/240 Vac Enables ENERGY STAR and DLC (DesignLightConsortium) luminaire compliance PLASTIC CASE: IP64-rated case with silicone-based potting L 84 x W 40 x H 25 mm (L 3.30 x W 1.57 x H 0.99 90 C maximum case hot spot temperature in) Class 2 power supply Double-insulated power supply between input and output (class II) Worldwide safety approvals Purple: + Dim White: Neutral Grey: -Dim LED DRIVER Red: + LEDs APPLICATIONS Black: Line Black: -LEDs Recessed lighting (downlights) 5 Commercial & Residential lighting WIRING DIAGRAM Architectural lighting ESS Series Data Sheet 1 ERP -ENERGY RECOVERY PRODUCTS July272016-Rev. D3-10 W ESS010 11-15 W ESS015 16-20 W ESS020 21-30 W ESS030 ESS040 31-40 W Tri-Mode Dimming (0-10 V & TRIAC/ELV) Constant Current LED Drivers with Fast Startup Time 1 - INPUT SPECIFICATION ( 25 C ambient temperature) Units Minimum Typical Maximum Notes Input4Voltage4Range4(Vin) ThrateoutpucurrenfoeacmodeiachieveaVin108 Vaa ESSxxxmodels Vac 90 120 305 Vin198 VafoESSxxxmodelsanaVin209 VafoESSxxxmodels. ESSxxxmodels 180 230 264 Anominaload. Input4Frequency4Range ESSxxxW Hz 47 60 63 ESSxxxE 47 50 53 AnominainpuvoltaganwitnominaLEvoltage Power4Factor4(PF) 0.9 0.9 Foderivativmodel10WP 0.8 a277 Vaonly Foderivativmodel5WP 0.7 a277 Vaonly Inrush4Current MeetNEMA 410 requirements Aanpoinothsinwavan25C 250 120 Vac Leakage4Current A 500 230 Vac MeasurepeIEC60950 1 600 277 Vac Input4Harmonics CompliewitIEC61000 3 2 foClasequipment AnominainpuvoltagannominaLEvoltage Total4Harmonics4Distortion4 20% CompliewitDL(DesignLighConsortiumtechnica (THD) requirements Measured with nominal input voltage, a full sinusoidal wave form and Efficiency % 87% without dimmer connected. Models in the ESS010 and ESS015 have a nominaefficienco85%. Isolation MeetUL60950 1 foclasIreinforced/doublinsulatiopowesupply 2 - OUTPUT SPECIFICATION ( 25 C ambient temperature) Units Minimum Typical Maximum Notes Output4Voltage4(Vout) Vdc 6 56 See(ordering(information(for(details See(ordering(information(for(details Output4Current4(Iout) mA 250 1100 The(rated(output(current(for(each(model(is(achieved(at(Vin108(Vac(&(at(Vin198(Vac(for( ESSxxxW(models,(and(at(Vin209(Vac(for(ESSxxxE(models. (At(nominal(AC(line(voltage Output4Current4Regulation % G5 2.5 5 (Includes(load(and(current(set(point(variations The(driver(does(not(operate(outside(of(the(regulation(requirements(for(more(than(500(ms( Output4Current4Overshoot % G G 10 during(power(on(with(nominal(LED(load(and(without(dimmer. (40%(of(rated(output(current(for(each (Measured(at(nominal(LED(voltage(and(nominal(input(voltage(without(dimming. Ripple4Current model Calculated(in(accordance(with(the(IES(Lighting(Handbook,(9th(edition.( Dimming4Range4(%4of4Iout) % 1 100 The(dimming(range(will(be(dependent(on(each(specific(dimmer. 300 With(nominal(LED(voltage(and(without(dimmer(attached StartEup4Time ms With nominal LED voltage, with an approved dimmer attached (see list of approved 400 dimmers(in(page(7)(and(at(the(full(dimming(conduction(angle Output4Controls The +Dim/GDim signal pinscan be used to adjust the output settingvia a standard commercial wall dimmer,an external control +Dim4Signal,4EDim4Signal voltage source(0to 10Vdc), or a variable resistor whenusing the recommended numberof LEDs.The dimminginput permits 1% to(100%(dimming. SaveEnergy ERPpowerllc.com 2 www.ERPpowerllc.com