Ericsson Internal Limited Internal E TABLE OF CONTEPRODUCT SPECIFICATION NTS 1 (1)1 (3) PrPreparepareedd ( (aallsso so subjubjecectt r reesponsisponsibbllee i iff othotheerr)) NNoo SEC/D Kevin CheSEC/S Kevin Chenn 1/130100152-E-BMR636 01/A4 UeN/LZT146 382 n Technical Specification ApprApprovoved Ced Checked hecked DDate ate RReevv RRefereferencence e EN/LZT 146 382 R1A June 2007 PKB 4717 PINB SEC/D JuliSEC/S Kevin a You Chen 20072007-6-6-21 -21 A A Ericsson Power Modules AB DC/DC converters, Input 36-75 V, Output 10.5 A/75 W Key Features Industry standard Eighth-brick 58.4 x 22.7 x 8.10 mm (2.300 x 0.894 x 0.323 in.) High efficiency, typ. 92 % at half load 2250 Vdc input to output isolation Meets isolation requirements equivalent to basic insulation according to IEC/EN/UL 60950 More than 1.5 million hours predicted MTBF at +40C ambient temperature General Characteristics Suited for narrow board pitch applications (15 mm/0.6 in) Output over voltage protection Input under voltage shutdown Over temperature protection Output short-circuit protection Safety Approvals Design for Environment Remote sense Remote control Output voltage adjust function Highly automated manufacturing ensures quality Pending Meets requirements in high- ISO 9001/14001 certified supplier temperature lead-free soldering Optimized for high capacity load processes. Contents General Information .............................................................2 Safety Specification .............................................................3 Absolute Maximum Ratings .............................................................4 Product Program Ordering No. 7.2 V/10.5 A Electrical Specification PKB 4717 PINB ...................................5 EMC Specification .............................................................8 Operating Information .............................................................9 Thermal Consideration ...........................................................10 Connections ...........................................................11 Mechanical Information ...........................................................12 Soldering Information ...........................................................13 Delivery Information ...........................................................13 Product Qualification Specification ...........................................................14 Ericsson Internal E PRODUCT SPECIFICATION 2 (3) Prepared (also subject responsible if other) No. SEC/S Kevin Chen 1/1301-BMR636 01/A4 Uen 2 Technical Specification Approved Checked Date Rev Reference EN/LZT 146 382 R1A June 2007 PKB 4717 PINB SEC/S Kevin Chen 2007-6-21 A Ericsson Power Modules AB DC/DC converters, Input 36-75 V, Output 10.5 A/75 W made of Brass) General Information Quality Statement Ordering Information The products are designed and manufactured in an See Contents for individual product ordering numbers. industrial environment where quality systems and methods like ISO 9000, 6 (sigma), and SPC are intensively in use to Option Suffix Ordering No. boost the continuous improvements strategy. Infant Positive Remote Control Logic P PKB 4717 PIPNB Increased stand-off height M PKB 4717 PINBM mortality or early failures in the products are screened out Lead length 3.69 mm (0.145 in) LA PKB 4717 PINBLA and they are subjected to an ATE-based final test. Lead length 4.57 mm (0.180 in) LB PKB 4717 PINBLB Conservative design rules, design reviews and product Note: As an example a positive logic, increased standoff, short pin product qualifications, plus the high competence of an engaged would be PKB 4717 PIPNBMLA. work force, contribute to the high quality of our products. Reliability Warranty The Mean Time Between Failure (MTBF) is calculated at full Warranty period and conditions are defined in Ericsson ) of output power and an operating ambient temperature (T A Power Modules General Terms and Conditions of Sale. +40C, which is a typical condition in Information and Communication Technology (ICT) equipment. Different Limitation of Liability methods could be used to calculate the predicted MTBF and failure rate which may give different results. Ericsson Ericsson Power Modules does not make any other Power Modules currently uses Telcordia SR332. warranties, expressed or implied including any warranty of merchantability or fitness for a particular purpose Predicted MTBF for the series is: (including, but not limited to, use in life support - 1.5 million hours according to Telcordia SR332, issue applications, where malfunctions of product can cause 1, Black box technique. injury to a persons health or life). The Ericsson failure rate data system is based on field tracking data. The data corresponds to actual failure rates of components used in ICT equipment in temperature controlled environments (T = -5...+65C). A Telcordia SR332 is a commonly used standard method intended for reliability calculations in ICT equipment. The parts count procedure used in this method was originally modelled on the methods from MIL-HDBK-217F, Reliability Predictions of Electronic Equipment. It assumes that no reliability data is available on the actual units and devices for which the predictions are to be made, i.e. all predictions are based on generic reliability parameters. Compatibility with RoHS requirements The products are compatible with the relevant clauses and requirements of the RoHS directive 2002/95/EC and have a maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent chromium, PBB and PBDE and of 0.01% by weight in homogeneous materials for cadmium. Exemptions in the RoHS directive utilized in Ericsson Power Modules products include: - Lead in high melting temperature type solder (used to solder the die in semiconductor packages) - Lead in glass of electronics components and in electronic ceramic parts (e.g. fill material in chip resistors) - Lead as an alloying element in copper alloy containing up to 4% lead by weight (used in connection pins