PRODUCT SPECIFICATION 1 (3) Prepared (also subject responsible if other) No. JIDLZHAO 1/1301-BMR6401211+ Uen Technical Specication Approved Checked Date Rev Reference EN/LZT 146352 R3A Oct. 2017 PKR 2000A series Direct Converters 2017-10-23 E Flex Input 18-36 V, Output up to 2 A / 15 W Key Features Industry standard footprint 47.8 x 28.1 x max height 8.0 mm (1.88 x 1.11 x max height 0.32 in.) High efficiency, typ. 85 % at 5.0 Vout full load 1500 Vdc input to output isolation Meets isolation requirements equivalent to basic insulation according to IEC/EN/UL 60950 o More than 5.0 million hours predicted MTBF at 40 C ambient temperature General Characteristics Input under voltage protection Over temperature protection Output short-circuit protection Over current protection Soft start Safety Approvals Design for Environment Remote control Output voltage adjust function Highly automated manufacturing to ensure highest quality Meets requirements in high- ISO 9001/14001 certified supplier temperature lead-free soldering processes. Contents Ordering Information ......................................................2 General Information ......................................................2 Safety Specification ......................................................3 Absolute Maximum Ratings ......................................................4 Electrical Specification 3.3V, 2.0A / 6.6W PKR 2610A SI.............................5 5.0V, 2.0A / 10W PKR 2111A SI.............................8 12V, 1.0A / 12W PKR 2113A SI...........................11 +12V, 0.62A / -12V, 0.62A / 15W PKR 2221A SI...........................14 EMC Specification ....................................................17 Operating Information .....................................................18 Thermal Consideration ......................................................19 Connections ......................................................20 Mechanical Information ......................................................21 Soldering Information ......................................................24 Delivery Information ......................................................26 Product Qualification Specification .......................................................27 PRODUCT SPECIFICATION 2 (3) Prepared (also subject responsible if other) No. JIDLZHAO 1/1301-BMR6401211+ Uen 2 Technical Specication Approved Checked Date Rev Reference EN/LZT 146352 R3A Oct. 2017 PKR 2000A series Direct Converters 2017-10-23 E Flex Input 18-36 V, Output up to 2 A / 15 W Ordering Information Quality Statement Product program Output PKR 2610A SI 3.3 V, 2.0 A / 6.6 W The products are designed and manufactured in an PKR 2111A SI 5.0 V, 2.0 A / 10 W industrial environment where quality systems and methods like ISO 9000, Six Sigma, and SPC are intensively in use to PKR 2113A SI 12 V, 1.0 A / 12 W boost the continuous improvements strategy. Infant PKR 2221A SI 12 V, 0.62 A / 15W mortality or early failures in the products are screened out See Contents for individual product order ing nu m bers. and they are subjected to an ATE-based final test. Conservative design rules, design reviews and product qualifications, plus the high competence of an engaged Option Suffix Ordering No. work force, contribute to the high quality of the products. SMD, lead-free surface finish S PKR 2610A SI SMD, leaded surface finish SPB PKR 2610A SPBI Through hole pin P PKR 2610A PI Warranty Warranty period and conditions are defined in Flex General Terms and Conditions of Sale. General Information Reliability Limitation of Liability The Mean Time Between Failure (MTBF) is calculated at Flex does not make any other warranties, expressed or full output power and an operating ambient temperature implied including any warranty of merchantability or fitness (TA) of +40C, which is a typical condition in Information for a particular purpose (including, but not limited to, use in and Communication Technology (ICT) equipment. Different life support applications, where malfunctions of product can methods could be used to calculate the predicted MTBF cause injury to a persons health or life). and failure rate which may give different results. Flex currently uses one method, Telcordia SR332. Flex 2017 The information and specifications in this technical Predicted MTBF for the series is: specification is believed to be correct at the time of publication. However, no liability is accepted for - 6.0 million hours according to Telcordia SR332, issue inaccuracies, printing errors or for any consequences 1, Black box technique. thereof. Flex reserves the right to change the contents of this technical specification at any time without Telcordia SR332 is a commonly used standard method prior notice. intended for reliability calculations in ICT equipment. The parts count procedure used in this method was originally modelled on the methods from MIL-HDBK-217F, Reliability Predictions of Electronic Equipment. It assumes that no reliability data is available on the actual units and devices for which the predictions are to be made, i.e. all predictions are based on generic reliability parameters. Compatibility with RoHS requirements The products are compatible with the relevant clauses and requirements of the RoHS directive 2011/65/EU and have a maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent chromium, PBB and PBDE and of 0.01% by weight in homogeneous materials for cadmium. Exemptions in the RoHS directive utilized in Flex products are found in the Statement of Compliance document. Flex fulfills and will continuously fulfill all its obligations under regulation (EC) No 1907/2006 concerning the registration, evaluation, authorization and restriction of chemicals (REACH) as they enter into force and is through product materials declarations preparing for the obligations to communicate information on substances in the products.