Public Ericsson Internal E TABLE OF CONTEPRODUCT SPECIFICATION NTS 1 (1)1 (3) PrPreparepareedd ( (aallsso so subjubjecectt r reesponsisponsibbllee i iff othotheerr)) NNoo SEC/S Kevin EZHIXZH Zhou 00151/13012-E- BMR 638/1 UeN/LZT146380 Uenn Technical Speci cation ApprApprovoved Ced Checked hecked DDate ate RReevv RRefereferencence e EN/LZT 146 380 R2A Oct 2008 PKY 4000 PI series SEC/D (Julia You) 20082008-10-10--10 7 C C Ericsson Power Modules AB DC/DC converters, Input 36-75 V, Output up to 25 A/700 W Key Features Full-brick Industry Standard 116.8 x 61.0 x 12.7 mm (4.6 x 2.4 x 0.50 in.) High efficiency, typ. 95 % at 28 Vout within 30%-100% load range. 1500 Vdc input to output isolation Meets isolation requirements equivalent to basic insulation according to IEC/EN/UL 60950 1 million hours MTBF General Characteristics Excellent thermal performance Output over voltage protection Input over voltage protection Input under voltage shutdown Over temperature protection Monotonic startup Safety Approvals Design for Environment Remote sense Remote control Over current protection Output voltage adjust function Meets requirements in high- Power Good Function. temperature lead-free soldering AUX voltage 10V, 50mA processes. Highly automated manufacturing ensures quality ISO 9001/14001 certified supplier Contents General Information .............................................................2 Safety Specification .............................................................3 Absolute Maximum Ratings .............................................................4 Product Program Ordering No. 28 V, 21.5A / 600W Electrical Specification PKY 4616 PI ......................................... 5 28 V, 25A / 700W Electrical Specification PKY 4716 PI ......................................... 9 EMC Specification ........................................................... 13 Operating Information ...........................................................14 Thermal Consideration ...........................................................16 Connections ...........................................................17 Mechanical Information ...........................................................18 Soldering Information ...........................................................19 Delivery Information ...........................................................19 Product Qualification Specification ...........................................................20 Ericsson Internal E PRODUCT SPECIFICATION 2 (3) Prepared (also subject responsible if other) No. EZHIXZH 1/1301- BMR 638/1 Uen 2 Technical Speci cation Approved Checked Date Rev Reference EN/LZT 146 380 R2A Oct 2008 PKY 4000 PI series SEC/D (Julia You) 2008-10-7 C Ericsson Power Modules AB DC/DC converters, Input 36-75 V, Output up to 25 A/700 W General Information Ordering Information Quality Statement See Contents for individual product ordering numbers. The products are designed and manufactured in an industrial environment where quality systems and methods Option Suffix Ordering No. like ISO 9000, 6 (sigma), and SPC are intensively in use to Standard PKY 4716 PI boost the continuous improvements strategy. Infant Non-threaded stand off M PKY 4716 PIM mortality or early failures in the products are screened out Negative Remote Control logic N PKY 4716 PIN and they are subjected to an ATE-based final test. Conservative design rules, design reviews and product Note: As an example a negative logic with non-threaded stand off product qualifications, plus the high competence of an engaged would be PKY 4716 PINM. work force, contribute to the high quality of our products. Reliability The Mean Time Between Failure (MTBF) is calculated at full Warranty output power and an operating ambient temperature (T ) of A Warranty period and conditions are defined in Ericsson +40C, which is a typical condition in Information and Power Modules General Terms and Conditions of Sale. Communication Technology (ICT) equipment. Different methods could be used to calculate the predicted MTBF Limitation of Liability and failure rate which may give different results. Ericsson Power Modules currently uses Telcordia SR332. Ericsson Power Modules does not make any other warranties, expressed or implied including any warranty of Predicted MTBF for the series is: merchantability or fitness for a particular purpose - 1 million hours according to Telcordia SR332, issue 1, (including, but not limited to, use in life support Black box technique. applications, where malfunctions of product can cause injury to a persons health or life). Telcordia SR332 is a commonly used standard method intended for reliability calculations in ICT equipment. The parts count procedure used in this method was originally modelled on the methods from MIL-HDBK-217F, Reliability Predictions of Electronic Equipment. It assumes that no reliability data is available on the actual units and devices for which the predictions are to be made, i.e. all predictions are based on generic reliability parameters. Compatibility with RoHS requirements The products are compatible with the relevant clauses and requirements of the RoHS directive 2002/95/EC and have a maximum concentration value of 0.1% by weight in homogeneous materials for lead, mercury, hexavalent chromium, PBB and PBDE and of 0.01% by weight in homogeneous materials for cadmium. Exemptions in the RoHS directive utilized in Ericsson Power Modules products include: - Lead in high melting temperature type solder (used to solder the die in semiconductor packages) - Lead in glass of electronics components and in electronic ceramic parts (e.g. fill material in chip resistors) - Lead as an alloying element in copper alloy containing up to 4% lead by weight (used in connection pins made of Brass)