ETA-USA The Power Professionals DTE180-03X-F-W 180W Dual Output ITE Safety Approvals 3-Prong IEC 320-14,Class I Altitude:ITE up to 5000m <0.3Watts No load input Power. Touch current less than 100A No minimum load required 3 year warranty Safety pending Optional +5VSB 2A with 5% O/P regulation and 50mV ripplea MODEL/CHANNEL Unit DTE180-0512FWX-F-W6 DTE180-1212FWX-F-W6 Output Rating Vo Vo +12Vdc +5Vdc +12Vdc -12Vdc Io (min) A 0A 0A 0A 0A Io (max) A 15A 14A 15A 1A Ripple & Noise mV 120mV 100mV 120mV O/P Regulation % 5% Po (Max.) - 180W INPUT Input Voltage Range V 90-264VAC Range Hz 47-63Hz Power Factor VAC > 0.95 115VAC > 0.9 230VAC full load Efciency % > 86% Average Efficiency, 115/230VAC Input range VAC 90-264VAC Frequency Hz 47-63Hz Efciency Power Factor VAC > 0.95 115VAC > 0.9 230VAC full load Inrush current VAC < 25A peak 115VAC < 50A peak 230VAC cold start 25C Input current (rms) VAC 3A 115VAC 1.5A 230VAC max. Maximum output power (Po) W 180W Holdup time VAC > 16ms typical full load, 115VAC Operating temperature C -20 to +60C ( Refer to derating curve ) Environmental Specification Storage Humidity % 0-95%, non-condensing. Humidity % 10C-95C, non-condensing MTBF - >200,000 hours at full load and 25C ambient temperature based on Bellcore TR-332 Safety Standards - UL/c-UL UL62368-1 TUV EN62368-1 CB IEC 62368- Environmental Agencies EMI Standards(Meet) - EN55032 Class B EN55035 Class B FCC Part 15 Class B CE Over Voltage Protection - Latch off, AC recycle Protection Over Load Protection - Auto-recover Short circuit protection - Auto-recover Dimension/*Weight mm/g L 200W 90H45 mm ( 7.874 x3.543 x1.77 )/ 1.2kgs. (2.65 lbs. ) Note: 1. Peaktopeak with 20MHz bandwidth with a tantalum 10uF ETA-USA 16170 Vineyard Blvd. Suite 180 Morgan Hill, CA 95037 ETA-USA The Power Professionals Dimensions Diagrams 180W performance compliance Interference received, including cause undesired operation ETA-USA 16170 Vineyard Blvd. Suite 180 Morgan Hill, CA 95037