Simulator switch, magnetic operation 9510-... Description Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip indicator ring. Current rating marked on the push button according to customers request by adhesive labels or marking inserts. US patent number: US 7,038,562 B1 US patent number: US 6,490,141 B2 (moulded threadneck) Typical applications Simulators. 9510-... Ordering information Technical data Type No. 9510 switch with magnetic instantaneous trip for flight simulators Voltage rating (Other voltage DC 24 V DC 28 V Mounting method and style ratings upon request) G threadneck mounting with standard push button Threadneck design Trip current < 170 mA < 200 mA 1 M12x1x6.3 Trip time < 25 ms < 25 ms 2 7/16-32UNx6.3 Number of poles Min. switching voltage 1 single pole at +23 C/+73.4 F DC 22 V DC 25 V Accessories for threadneck at +60 C/+140 F DC 24 V DC 28 V 2 hex nut M12x1, aluminium, serrated lock washer 12.1/17.2, fitted 3 hex nut 7/16-32UN (aluminium), Internal resistance approx. 153 approx. 153 serrated lock washer 11.3/14.9, fitted Terminal configuration J screw terminals with inch thread Typical life 10,000 operations at rated voltage 1 6-32UNC-2B, silver plated bent 45 inwards 3 6-32UNC-2B, silver plated, with socket, bent 45 inwards Temperature range -30...+60 C (-22...+140 F) P blade terminals Insulation resistance > 100 M (DC 500 V) 1 A6.3x0.8 DIN 46244, silver plated Degree of protection operating area IP40 W wire wrap terminal (IEC 60529) terminal area IP00 4 pin size 1.2x1.2 EN 60352-1, gold plated, with socket Rated voltage Vibration (sinusoidal) 3 g (57-500 Hz), 0.23 mm (10-57 Hz) F0 DC 24 V to DIN IEC 60068-2-6, test Fc 5 F1 DC 28 V 10 cycles/frequency axis Accessories (terminal screws) Shock 5 g (11 ms), B Phillips screw 6-32UNC-2Ax4.8 fitted to DIN IEC 60068-2-27, test Ea (MS 51957-25) Humidity 240 hours at 95 % RH, 40 C Z without accessories to DIN IEC 60068-2-3, test Ca Accessories (terminal washers) Mass 23 g without hardware 0 without accessories 26 g with hardware 2 3.6 split washer fitted (MS 35338-136) Internal circuit R2 with logic diode Colour of the push button S black A green, for marking insert B black, for marking insert 0 without marking 1 hot-stamped marking, can be read when locating pin is above 9 without marking insert Current ratings 0.5...150 A 9510 - G 2 1 3 - J 1 F1 - B 0 R2 S 1 - 5 A ordering example 2015/16 www.e-t-a.de 5 - 59max .079 max .079 max 2 max. 2 Simulator switch, magnetic operation 9510-... Dimensions Other main terminal designs -P1 9510-G-J1..-B2.... tightening torque max. 3.5 Nm M12x1 or blade terminal 7/16-32UN-2A THD 10 DIN 46244-A6.3-0.8 (QC .250) .394 plug-in terminals 17 6.3 8.4 black or .669 .248 .331 green white hex nut -J3 lock washer terminal screw 6-32UNC-2A x 4.8/.189 (MS 51957-25) 8 I LINE 2 with lock washer 15 .315 10 (MS 35338-136) .591 plug-in/pull-out terminal .394 module (max. 10 times) terminal screw tightening torque max. 1 Nm 6-32UNC-2A x 4.8/.189 8 15 (MS 51957-25) .315 .591 with lock washer (MS 35338-136) -W4 plug-in terminals tightening torque: max. 0.8 Nm factory mounted max. 0.4 Nm mounted by customer wire wrap pin 1.2 x 1.2 /.047 x .047 EN 60352-1 plug-in/pull-out terminal module (max. 10 times) 12.7 1.2 mounting holes .047 .500 +0.15 10 3.2 9.5 .394 +.006 .126 .374 locating pin Internal connection diagram current rating in A 19.5 thickness 1.5 - 3 mm .768 .059 - .118 in. internal circuit R 2 2 - 5 + line I mm This is a metric design and millimeter dimensions take precedence ( ) inch 5 - 60 www.e-t-a.de 2015/16 45 45 SW14 (M12x1) SW12.7(7/16-32) 14.2 47.5 6.35 .559 1.87 .250 1.5 2.5 .059 .098 13 ON .512 42.7 18.5 OFF .728 1.68 +0.2 12.5 (M12x1) +0.2 11.5 (7/16-32) +.008 .492 (M12x1) +.008 3.5 .453 (7/16-32) .138 0.2 9.5 .008 .374 15.6 .614 6.8 9.5 3.6 .268 .374 .142