Transmissive Optoswitch VTL13D1H - D7H Slotted Switch 0.395 High PRODUCT DESCRIPTION This series of interrupter type transmissive optoswitches combines an infrared emitting diode (IRED) with an NPN phototransistor in a one piece, sealed, IR transmitting plastic case. The sealed construction improves resistance to debris and moisture. Internal apertures over detector and/or emitter are available to increase position sensing resolution. These devices are furnished with 12 inch, 26 AWG leads. Refer to VTL11H for devices with P.C.B. mount leads. ABSOLUTE MAXIMUM RATINGS Maximum Temperatures Storage and Operating: -40C to 85C Operating Temperature: -40C to 85C GENERAL CHARACTERISTICS ( 25C unless otherwise noted) Parameter Symbol Text Conditions Input IRED Output Detector Reverse Voltage V I = 100 A 2.0V Min. R R Continuous Forward Current I Derate 0.73 mA/C above 30C 40 mA Max. F Forward Voltage Drop V I = 20 mA 1.8V Max. F F Collector Breakdown Voltage V I = 100 A 30V Min. BR(CEO) C Emitter Breakdown Voltage V I = 100 A 5.0V Min. BR(ECO) C Power Dissipation P Derate 0.91 mW/C above 30C 50 mW Max. D PACKAGE DIMENSIONS inch (mm) PerkinElmer Optoelectronics, 22001 Dumberry, Vaudreuil, Canada J7V 8P7 Phone: 877-734-6786 Fax: 450-424-3413 www.perkinelmer.com/opto 34ELECTRO-OPTICAL CHARACTERISTICS 25C (See also curves, pages 32 & 33) (1) LIGHT CURRENT, I DARK CURRENT SATURATION VOLTAGE P APERTURE (2) PART NO. COMBINATION Test Conditions Test Conditions Test Conditions (4) mA Min. nA Max. Volts Max. I mA V Volts I mA V Volts I mA I mA Emitter Detector F CE F CE F C VTL13D1H 0.5 20 5 100 0 10 0.4 20 0.25 None None VTL13D1-20H 0.15 20 5 100 0 10 0.4 20 0.25 .020 Wide None VTL13D3H 2.0 20 5 100 0 10 0.4 20 1.8 None None VTL13D3-20H 0.6 20 5 100 0 10 0.4 20 1.8 .020 Wide None VTL13D5-20H 0.15 20 5 100 0 10 0.4 20 0.25 .020 Wide .010 Wide VTL13D6-20H 0.075 20 5 100 0 10 0.4 20 0.25 .020 Wide .005 Wide VTL13D7H 0.75 20 5 100 0 10 0.4 20 0.25 None .020 Wide VTL13D7-20H 0.225 20 5 100 0 10 0.4 20 0.25 .020 Wide .020 Wide Notes: 1. The dark current is measured with the part totally shielded from ambient light. With 2150 lux (200 fc) from a cool white fluorescent lamp falling on the part, the typical dark current will be 3 A for VTL13DH devices. Equivalent light from an incandescent lamp will result in significantly greater currents. 2. The apertures used for these slotted switches are .040 (1.02 mm) high. 3. The case material is polysulfone and should be cleaned with alcohol or freon TF only. Avoid chlorinated hydrocarbons and solvents such as acetone or toluene, as damage may result. 4. VTL13D7-20H accommodates most applications. The other parts in this series are available only for specialized, high volume applications. PerkinElmer Optoelectronics, 22001 Dumberry, Vaudreuil, Canada J7V 8P7 Phone: 877-734-6786 Fax: 450-424-3413 www.perkinelmer.com/opto 35