F&F Filipowski sp. j. Wireless system ul. Konstantynowska 79/81, 95-200 Pabianice tel./fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl e-mail: fif fif.com.pl FW-RC4 4-button remote control Do not dispose of this device to thrash with other unsorted waste In accordan- ce with the Waste Electrical and Electronic Equipment Act any household electro-wa- ste can be turned in free of charge and in any quan tity to a collecti on point established for this purpose, as well as to the store in the event of purchasing new equipment (as per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban- doned in the bosom of nature pose a threat to the environment and human health. Description of the system F&Wave is a family of wireless devices controlled by radio with a range of up to 100 meters*. The receivers are available in either a DIN-rail mounting version (housing 1S) or a 60 flush-mounted version. The transmitters are available as handheld remo- te controllers or as a flush-mounted version. The receivers relay control signals. The device that receives a control signal from the transmitter will automatically send it forward, which allows to increase the range of the remote control. * Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of interference sources (power lines, transmitters, etc.) the actual range may be smaller. - 1 -Features of the device Four-button remote control transmitter Cooperation with remote control transmitters of the F&Wave system The ability to control any number of receivers On/off functionality (bistable switch) with receivers: FW-R1P, FW-R1D, FW-R2P, FW-R2D, FW-D1P, FW-D1D, FW-LED2P, FW-LED2D Raise/lower the roller-blind functionality with receivers: FW-STR1P, FW-STR1D Dim/lighten the lighting functionality with receivers: FW-D1P, FW-D1D, FW-LED2P, FW-LED2D. View of the device Pairing After the receiver is properly connected, press and hold the PROG button until the device activates output circuit and the communication LED will go off. Press the selected button on a remote control or in a flush-mounted transmitter. - 2 -