FW-STR1D F&F

F&F Filipowski sp. j. Wireless system ul. Konstantynowska 79/81, 95-200 Pabianice tel./fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl e-mail: fif fif.com.pl FW-STR1D Roller-blind controller 230 V AC Do not dispose of this device to thrash with other unsorted waste In accordan- ce with the Waste Electrical and Electronic Equipment Act any household electro-wa- ste can be turned in free of charge and in any quan tity to a collecti on point established for this purpose, as well as to the store in the event of purchasing new equipment (as per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban- doned in the bosom of nature pose a threat to the environment and human health. Description of the system F&Wave is a family of wireless devices controlled by radio with a range of up to 100 meters*. The receivers are available in either a DIN-rail mounting version (housing 1S) or a 60 flush-mounted version. The transmitters are available as handheld remo- te controllers or as a flush-mounted version. The receivers relay control signals. The device that receives a control signal from the transmitter will automatically send it forward, which allows to increase the range of the remote control. * Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of interference sources (power lines, transmitters, etc.) the actual range may be smaller. - 1 -Installation of this device should be carried out by a qualified installer after reading this manual. Dismantling the casing of the device will au- tomatically void the warranty. Before starting the assembly, make sure that the connecting wires are not live. Conditions of storage, transport and use affect the proper operation of the device. Features of the module Controller of the roller-blinds with AC motors Cooperation with remote control transmitters of the F&Wave system The ability to control from up to 8 transmitters Two inputs for local control - the ability to directly control the relay using any mo- nostable button (for example: bell button) Two output contacts for both directions of the roller-blind movement with a load capacity of 1.5 A (AC-3) Compact enclosure - takes only one field in the switchboard Retransmission of commands from the transmitter - the ability to increase the range of the remote control Low power consumption - low operating cost Built-in electronic thermal protection to prevent damage in case of excessive load of the relay Electric lock to prevent power supply switching on on both windings of the motor. - 2 -