PRODUCT SPECIFICATION 1 (3)
Prepared (also subject responsible if other) No.
JIDLZHAO 1/1301-BMR6401211+ Uen
Technical Specication
Approved Checked Date Rev Reference
EN/LZT 146352 R3A Oct. 2017
PKR 2000A series Direct Converters
2017-10-23 E
Flex
Input 18-36 V, Output up to 2 A / 15 W
Key Features
Industry standard footprint
47.8 x 28.1 x max height 8.0 mm (1.88 x 1.11 x max
height 0.32 in.)
High efficiency, typ. 85 % at 5.0 Vout full load
1500 Vdc input to output isolation
Meets isolation requirements equivalent to basic
insulation according to IEC/EN/UL 60950
o
More than 5.0 million hours predicted MTBF at 40 C
ambient temperature
General Characteristics
Input under voltage protection
Over temperature protection
Output short-circuit protection
Over current protection
Soft start
Safety Approvals Design for Environment
Remote control
Output voltage adjust function
Highly automated manufacturing to ensure highest
quality
Meets requirements in high-
ISO 9001/14001 certified supplier
temperature lead-free soldering
processes.
Contents
Ordering Information ......................................................2
General Information ......................................................2
Safety Specification ......................................................3
Absolute Maximum Ratings ......................................................4
Electrical Specification
3.3V, 2.0A / 6.6W PKR 2610A SI.............................5
5.0V, 2.0A / 10W PKR 2111A SI.............................8
12V, 1.0A / 12W PKR 2113A SI...........................11
+12V, 0.62A / -12V, 0.62A / 15W PKR 2221A SI...........................14
EMC Specification ....................................................17
Operating Information .....................................................18
Thermal Consideration ......................................................19
Connections ......................................................20
Mechanical Information ......................................................21
Soldering Information ......................................................24
Delivery Information ......................................................26
Product Qualification Specification .......................................................27
PRODUCT SPECIFICATION 2 (3)
Prepared (also subject responsible if other) No.
JIDLZHAO 1/1301-BMR6401211+ Uen
2
Technical Specication
Approved Checked Date Rev Reference
EN/LZT 146352 R3A Oct. 2017
PKR 2000A series Direct Converters
2017-10-23 E
Flex
Input 18-36 V, Output up to 2 A / 15 W
Ordering Information
Quality Statement
Product program Output
PKR 2610A SI 3.3 V, 2.0 A / 6.6 W The products are designed and manufactured in an
PKR 2111A SI 5.0 V, 2.0 A / 10 W industrial environment where quality systems and methods
like ISO 9000, Six Sigma, and SPC are intensively in use to
PKR 2113A SI 12 V, 1.0 A / 12 W
boost the continuous improvements strategy. Infant
PKR 2221A SI 12 V, 0.62 A / 15W
mortality or early failures in the products are screened out
See Contents for individual product order ing nu m bers.
and they are subjected to an ATE-based final test.
Conservative design rules, design reviews and product
qualifications, plus the high competence of an engaged
Option Suffix Ordering No.
work force, contribute to the high quality of the products.
SMD, lead-free surface finish S PKR 2610A SI
SMD, leaded surface finish SPB PKR 2610A SPBI
Through hole pin P PKR 2610A PI
Warranty
Warranty period and conditions are defined in Flex General
Terms and Conditions of Sale.
General Information
Reliability
Limitation of Liability
The Mean Time Between Failure (MTBF) is calculated at
Flex does not make any other warranties, expressed or
full output power and an operating ambient temperature
implied including any warranty of merchantability or fitness
(TA) of +40C, which is a typical condition in Information
for a particular purpose (including, but not limited to, use in
and Communication Technology (ICT) equipment. Different
life support applications, where malfunctions of product can
methods could be used to calculate the predicted MTBF
cause injury to a persons health or life).
and failure rate which may give different results. Flex
currently uses one method, Telcordia SR332.
Flex 2017
The information and specifications in this technical
Predicted MTBF for the series is:
specification is believed to be correct at the time of
publication. However, no liability is accepted for
- 6.0 million hours according to Telcordia SR332, issue
inaccuracies, printing errors or for any consequences
1, Black box technique.
thereof. Flex reserves the right to change the
contents of this technical specification at any time without
Telcordia SR332 is a commonly used standard method
prior notice.
intended for reliability calculations in ICT equipment. The
parts count procedure used in this method was originally
modelled on the methods from MIL-HDBK-217F, Reliability
Predictions of Electronic Equipment. It assumes that no
reliability data is available on the actual units and devices
for which the predictions are to be made, i.e. all predictions
are based on generic reliability parameters.
Compatibility with RoHS requirements
The products are compatible with the relevant clauses and
requirements of the RoHS directive 2011/65/EU and have a
maximum concentration value of 0.1% by weight in
homogeneous materials for lead, mercury, hexavalent
chromium, PBB and PBDE and of 0.01% by weight in
homogeneous materials for cadmium.
Exemptions in the RoHS directive utilized in Flex products are
found in the Statement of Compliance document.
Flex fulfills and will continuously fulfill all its obligations under
regulation (EC) No 1907/2006 concerning the registration,
evaluation, authorization and restriction of chemicals (REACH)
as they enter into force and is through product materials
declarations preparing for the obligations to communicate
information on substances in the products.