LIMITED WARRANTY & LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year and begins on the date of shipment. Parts, product repairs and services are warranted for 90 days. This BC190 warranty extends only to the original buyer or end- user customer of a Fluke authorized reseller, and Battery Charger / does not apply to fuses, disposable batteries or to any product which, in Fluke s opinion, has been Power Adapter misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non- Instruction Sheet defective media. Fluke does not warrant that software will be error free or operate without interruption. Fluke authorized resellers shall extend this warranty on Specifications new and unused products to end-user customers only but have no authority to extend a greater or different z Versions: warranty on behalf of Fluke. Warranty support is available if product is purchased through a Fluke BC190/801 European line plug authorized sales outlet or Buyer has paid the applicable 230 V 10%. international price. Fluke reserves the right to invoice BC190/804 United Kingdom line plug Buyer for importation costs of repair/replacement parts 230 V 10%. when product purchased in one country is submitted for repair in another country. BC190/806 Japanese line plug 100 V 10%. Fluke s warranty obligation is limited, at Fluke s option, BC190/807 Australian line plug to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to 230 V 10%. a Fluke authorized service center within the warranty BC190/808 Universal switchable period. adapter 115 V 10% or 230V 10%, To obtain warranty service, contact your nearest Fluke with plug EN60320-2.2G authorized service center or send the product, with a BC190/813 North American line plug description of the difficulty, postage and insurance 120 V 10%. prepaid (FOB Destination), to the nearest Fluke z Line frequency: 50 and 60 Hz authorized service center. Fluke assumes no risk for damage in transit. Following warranty repair, the z Output voltage: 17.8 V product will be returned to Buyer, transportation prepaid z Output current: 840 mA. (FOB Destination). If Fluke determines that the failure z Output plug: 5-mm power jack per was caused by misuse, alteration, accident or abnormal condition of operation or handling, Fluke will provide an DIN 45232. estimate of repair costs and obtain authorization before z Plus (+) voltage connected to outer commencing the work. Following repair, the product will contact of the 5-mm power jack. be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return z Operating temperature: 0 to +40 C transportation charges (FOB Shipping Point). (32 F to 104 F). THIS WARRANTY IS BUYER S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE OR ANY OTHER THEORY. May 1999, rev.1, 8/08 1999-2008 Fluke Corporation. All rights reserved. Since some countries or states do not allow limitation of Printed in The Netherlands. the term of an implied warranty, or exclusion or limitation of incidental or consequential damages, the All product names are trademarks of their respective limitations and exclusions of this warranty may not companies. Fluke Corporation Fluke Industrial BV apply to every buyer. If any provision of this Warranty is PO Box 9090 PO Box 90 held invalid or unenforceable by a court of competent Everett 7600 AB Almelo jurisdiction, such holding will not affect the validity or WA 98206-9090 The Netherlands enforceability of any other provision. USA Operation Please read these instructions carefully before using the Battery Charger/Power Adapter BC190. Warning To avoid electrical shock or fire, use the Battery Charger/Power Adapter BC190 only as replacement part if the BC190 is specified for Fluke instruments. Figure 1. BC190/801 Figure 4. BC190/807 Warning To avoid electrical shock, connect the Battery Charger/Power Adapter to the AC outlet before connection to the Fluke instrument. The Battery Charger/Power Adapter operates the Fluke instrument from local line voltage. Do not open the BC190, it is not serviceable. Symbols Figure 5. BC190/808 Figure 2. BC190/804 International electrical symbols used are explained below. See explanation on Instruction Sheet DOUBLE INSULATION (Protection Class) Conformit Europenne Do not dispose of this product as unsorted municipal waste. Go to Fluke s website for Figure 3. BC190/806 Figure 6. BC190/813 recycling information. Caution Before you connect the BC190/808 to the local line, first check the voltage setting on this unit (see Figure 5). For connection to the mains outlet, use a power cord that complies with national standards.