Fluke Industrial/Commercial Thermal Imagers Models: Ti25, Ti10 and Ti9 Technical Data High performance thermal imagers have never been this affordable. This rugged. Or, this easy to use until now. The perfect tools to add to your problem solving arsenal. Built for tough work environments, these high-performance, fully radiometric imagers are ideal for troubleshooting electrical Ti25 installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others. Ti10 The Fluke Ti10 and Ti25 thermal imagers come with enhanced problem detection and analysis capabilities with IR-Fusion Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture- in-picture, or automatic blend visual and thermal images. Optimized for field use in harsh work environments Engineered and tested to withstand a 2 m (6.5 ft) drop Withstands dust and watertested to an IP54 rating. Delivers the clear, crisp images needed to find problems fast. Identify even small temperature differences that could indicate Ti9 problems with excellent thermal sensitivity (NETD). Intuitive, three-button menu is easy to usesimply navigate with the push of a thumb. No need to carry pen and paperrecord findings by speaking into the camera. Voice comments are saved along with individual images for future reference (Ti25 only) Industrial, mechanical, electromechanical and general building maintenance. Fluke. Not just infrared, infrared you can use. Not all fusion is created equal Dont be fooled by imitators. No other manufacturer Process, refractory Patented Fluke IR-Fusion Technology can boast on-camera blending. Compare the images. insulation, tank and vessel levels, steam Only Fluke has mastered the ability to create the systems and traps, More than picture in picture industrys only transparent, perfectly blended and pipes and valves, etc. Infrared images alone can be difficult to under- aligned visible and infrared images. stand, which is why Fluke pioneered IR-Fusion, Fluke Competitor a revolutionary marriage of visible and infrared images never before seen in commercial or industrial thermal imagers. Automatically Electrical, unbalanced capturing a visible image with every infrared loads, overloaded image allows to you always know exactly what systems, wiring youre looking at. mistakes or component failure, etc.Detailed specifications Ti25 Ti10 Ti9 Temperature Temperature measurement range -20 C to +350 C (-4 F to +662 F) -20 C to +250 C (-4 F to +482 F) -20 C to +250 C (-4 F to +482 F) (not calibrated below -10 C) Temperature measurement 5 C or 5 % (at 25 C nominal, 2 C or 2 % (at 25 C nominal, whichever is greater) accuracy whichever is greater) On-screen emissivity correction Yes, and in software In software only On-screen reflected background Yes, and in software In software only temperature compensation Imaging performance Image capture frequency 9 Hz refresh rate Detector type 160 X 120 Focal Plane Array, uncooled microbolometer Thermal sensitivity (NETD) 0.09 C at 30 C target temp. (90 mK) 0.13 C at 30 C target temp. (130 mK) 0.20 C at 30 C target temp. (200 mK) Visual (visible light) camera Industrial performance 1.3 megapixels Minimum (visible light) 46 cm (approx. 18 in) No visible camera focus distance Infrared field of view 23 x 17 Spatial resolution (IFOV) 2.5 mRad Minimum infrared focus distance 15 cm (approx. 6 in) Focus mechanism Manual, one-handed Smart Focus capability Image presentation Palettes Standard Ironbow, Blue-Red, High Contrast, Ironbow, Blue-Red, Amber, Hot Metal, Grayscale High Contrast, Grayscale Level and span Smooth auto-scaling and manual scaling of level and span Fast auto toggle between manual Yes and auto modes Fast auto-rescale in manual mode Yes Minimum span (in manual mode) 2.5 C (4.5 F) 5 C (9 F) Minimum span (in auto mode) 5 C (9 F) 10 C (18 F) IR-Fusion information Automatically aligned (parallax Yes corrected) visual and IR blending No IR-Fusion Picture-In-Picture (PIP) Three levels of on-screen IR blending 100 % IR displayed in center of LCD displayed in center of LCD (AutoBlend) Full screen infrared Three levels of on-screen IR blending 100 % IR displayed on LCD displayed on LCD (AutoBlend) Voice annotation 60 seconds maximum recording time per image reviewable playback on imager Image capture and data storage The Ti25 allows user to adjust palette, blending, level, span, IR-Fusion mode, emissivity, and reflected background temperature compensation on a captured image before it is stored. Image capture, review, save One-handed image capture, review, and save capability mechanism Storage medium SD Memory Card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations (when available), or 3000 basic bitmap (.bmp) images transferrable to PC via included multi-format USB card reader File formats Non-radiometric (.bmp) or fully-radiometric (.is2) No analysis software required for non-radiometic bitmap (.bmp) files Export file formats w/SmartView BMP, DIB, GIF, JPE, JFIF, JPEG, JPG, PNG, TIF, and TIFF software Memory review Sequential image navigation and review 2 Fluke Corporation Ti25, Ti10 and Ti9 Industrial/Commercial Thermal Imagers