1AC-II/1LAC-II VoltAlert The pocket-sized voltage detector Technical Data The next generation VoltAlert ac voltage testers from Fluke are easy to usejust touch the tip to a terminal strip, outlet, or cord. When the tip glows red and the unit beeps, you know theres voltage in the line. Electricians, mainte- nance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory ofl or, in the shop, or at home. The 1AC-II continually tests its battery and its circuit integrity with a periodic double afl sh visual indication using Fluke Voltbeat technology. The VoltAlert Tester (1AC-II and 1LAC-II) is a Category IV 1000 V overvoltage rated product for added user protection, the highest rated of its kind. Voltage detection of 90 V to 1000 V ac or 200 V to 1000 V ac depending on model, as well as a 24 V to 1000 V ac control circuit model. It is rugged, reliable, and has a two-year warranty. Specicfi ations Operating principle Agency approvals/listings Senses the steady state elec- c CSA us, CE, C-Tick trostatic efi ld produced by ac Safety rating voltage through insulation without requiring contact to the 1000 V, CAT IV bare conductor. A red glow at IP rating the tip and a beeping noise (if not switched OFF) indicates the IP 40 presence of voltage. Operating temperature Note: Does not respond to random range electrostatic discharge. -10 C to 50 C Voltage sensing ranges Operating humidity ranges Nominally, 90 V AC to 1000 V C US AC or 200 V AC to 1000 V AC 0 % to 95 % (0 C to 30 C) depending on model, 45 Hz to 0 % to 75 % (30 C to 40 C) 405 Hz also a 20 V to 90 V 0 % to 45 % (40 C to 55 C) control circuit model Operating altitude Detector tip style 3000 meters Blade or round, depending on model Batteries 2 AAA alkaline batteries Light source included One high intensity red LEDRelated standards and regulations for: Ordering Information Safety Fluke-1AC-A1-II ACV Detector 90-1000V, ENGL/LASPN/CFR Europe and ROW: Low voltage Part Number 2432932 directive and related stan- Fluke-1AC-A2-II ACV Detector 90-1000V, BRPORT/JAP/CHIN-T dards as: EN61010 respectively Part 2432944 IEC61010 for international Fluke-1AC-E1-II ACV Detector 200-1000V, ENGL/GER/FREN/DUTCH requirements Part 2432967 EMC Fluke-1AC-E2-II ACV Detector 200-1000V, DANSH/NORW/SWED Europe and ROW: EMC direc- Part 2432971 tive and related standards as: Fluke-1AC-P1-II ACV Detector 200-1000V, KOR/THAI/SPANISH EN61326 respectively IEC61326 Part 2433000 and their subset for ESD. Not Fluke-1LAC-A-II Low Voltage Detector 20-90 VAC AMERICAS PACIFIC all EMC standards are neces- Part 2433021 sary due to no contact to mains voltage. FLK-1AC-A1-II-5PK Volt Alert, 5 Pack For USA Part 2433042 Environmental FLK-1AC-E1-II-5PK Volt Alert, 5 Pack For EUROPE Especially in European markets Part 2433056 with relations to WEEE and RoHs directive for the used ma- terials and information in the user documetation (manual) Americas version European version Low volt version For more information call: Fluke. Keeping your world In the U.S.A. (800) 443-5853 or up and running. Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 Fluke Corporation In Canada (800)-36-FLUKE or PO Box 9090, Everett, WA 98206 U.S.A. Fax (905) 890-6866 Fluke Europe B.V. From other countries +1 (425) 446-5500 or PO Box 1186, 5602 BD Fax +1 (425) 446-5116 Eindhoven, The Netherlands Web access: