FSM-IMX296C-01S-V1A FRAMOS

FSM-IMX296 Datasheet Sony IMX296LLR / IMX296LQR Sensor Module FRAMOS Sensor Module FSM-IMX296 FSM-IMX296M FSM-IMX296C v1.0f Datasheet Specification Model Name FSM-IMX296M / FSM-IMX296C (v1B) Image Sensor Sony Vendor / Name IMX296LLR / IMX296LQR Technology CMOS Global Shutter Chromaticity Mono Optical Format 1/2.9 Pixel Size 3.45 x 3.45 m Max. Resolution 1.6 Mpx / 1440 x 1080 px Framerate (max.) 60 FPS (at max. resolution) Key Benefits & Features: Bit Depth(s) 10 bit 1.6 Mpx Sony CMOS Global Shutter sensor Interface module, ready to embed Module Interface MIPI CSI-2 (1 Lane) All FSMs are part of a rapid prototyping Control Interface IC (4-wire serial) ecosystem, consisting of: Clock Frequency(s) 37.125 / 74.25 / 54 MHz Adapters to various processing boards Voltage Requirements 1.2V / 1.8V / 3.3V Design sources for deep embedding Interface Connector Hirose DF40C-60DP-0.4V(51) Various accessories and design in services EEPROM (Sensor ID) No FSM-IMX296M (Monochrome): Mechanical Dimensions (HxWxD) 26.5 mm x 26.5 mm x 4.81 mm Environmental -30C to +75C (function) Operating Temperature -10C to +60C (performance) Storage Temperature -40C to +85C Ambient Humidity 20% to 95% RH, non condensing Software Support Driver V4L2 Based Device Driver NVIDIA Jetson TX2 / AGX Xavier Supported Platform(s) Qualcomm DragonBoard 410C L4T 32.2.1 (JetPack 4.2.2) Linux Version(s) Linaro 18.01 (DB410c) FSM-IMX296C (Color): API Languages C / C++ Suggested Accessories Flex Cable 150 mm (FSM to FSA) FMA-FC-150/60 Lens Mounts: M12 or C/CS-Mount options A matrix with compatible Sensor Adapters (FSA) and Processor Board Adapters (FPA) for single- and multi-sensor setups can be found separately at the end of this document. Available in Development Kit Version v1.0f from 2019-12-06 www.framos.com FRAMOS 2019, information is subject to change without prior notice. FSM-IMX296M / FSM-IMX296C Datasheet Mechanical Drawing Sensor image optical center is in mechanical board center. Connector Pinout Type: Hirose DF40C-60DP-0.4V(51) Mating Type: Hirose DF40HC(4.0)-60DS-0.4V(51) Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 Pin 1 according to print on PCB. Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 All signals are routed directly from image sensor to connector. Details on specific signals are described in the respective image sensor datasheet. Version v1.0f from 2019-12-06 www.framos.com FRAMOS 2019, information is subject to change without prior notice. Name Name NC NC NC NC 1V2 3V3 1V2 3V3 NC 1V8 GND GND GND GND NC XCLR SDO NC TOUT1 XMASTER NC SCK SCL NC XCE TOUT2 XVS NC SDI SDA NC XHS TOUT0 XTRIG NC NC NC SLAMODE GND GND NC INCK NC NC GND GND NC NC NC NC GND GND NC CSI D0 N NC CSI D0 P GND GND CSI CLK P NC CSI CLK N NC