ELECTRO-OPTIC TYPE General Purpose ELS 1100 Series Satisfies Most Applications These polysulfone units are both compact and economical. They feature a variety of mountings, power requirements and electrical terminations to make it easy to find a perfect match for your application. Specifications Materials Housing and Prism Polysulfone or Nylon Operating Pressure 0 to 150 PSI, Maximum Operating Temperature* 0F to 176F (-17.8C +80C) Current Consumption 18 mA, Approximately Output TTL/CMOS Compatible. Open Collector Output May Sink 40 mA UP TO 30 VDC. Repeatability 1 mm EMI Susceptability Meets (MIL-STD-461B Part 2 Modified) Specification of 10 V/M for Frequency Range 30 to 1000 MHz U.L. Listed (Except 609 MHz = 9 V/M and 679 MHz = 7.5 V/M). File No. E108913 * These switches are not for use in freezing liquid or steam/high condensation environments. Contact Gems for alternative solutions. Dimensions 1/4 NPT Mounting 1/4 NPT Mounting 1/2 Straight Thread Mounting M12x1-8g Straight Thread Fish Pull Ring with 3/8 Conduit with O-Ring with O-Ring LEAD WIRES CABLE EPOXY 3/8 NPT ENCAPSULATED MOUNTING 5/8 HEX 5/8 HEX 5/8 HEX. (15.9 mm) (15.9 mm) (15.9 mm) 5/8 HEX (15.9 mm) 5/8 HEX (15.9 mm) VITON VITON 2-5/32 2-5/32 2-5/32 2-5/32 O-RING O-RING (54.7 mm) (54.7 mm) (54.7 mm) (54.7 mm) 2-5/8 REF. REMOVABLE 1/4 NPT 1/4 NPT (66.7 mm) M12 x 1-8g PVC FISH 1/2 - 20 .47 REF47 REF. PULL RING UNF 2A Electrical 25 Cable, 22 AWG, Lead Wires, 22 AWG, PVC Jacketed, 12 to 14 Extended Termination PVC Jacketed How To Order Specify Part Number based on Mounting Type, Input Power and Output Condition required. Mounting Type Probe Condition 1/2 M12x1-8g Input Power 1/4 NPT 1/4 NPT & 3/8 Conduit Fish Pull Ring at Current SInk Straight Thread Straight Thread Polysulfone Polysulfone Nylon Polysulfone Polysulfone Polysulfone 5 VDC Wet 138167 144225 175631 144235 166541 Wet 142700 143585 157750 143580 169555 143577 10-28 VDC Dry 143570 143590 175632 143575 169556 148973 Stock Items. Extended Power and Switching Capabilities Intrinsically-Safe Versions of 12 VDC Models with Gems. GEMS ELS-1100 Switches may be rendered intrinsically-safe for Class I, Division 1, Converts TTL output signal to 5 Amp Group C & D when used with appropriate GEMS Zener Barriers. Call Gems Sensors relay output. Available as open circuit for special ELS-1100-IS (intrinsically-safe) part numbers and Installation Bulletins board or mounted in a NEMA 4X 148745 and 148744, File No. E44570. enclosure (pictured). See Page A-31. A-27 Visit www.GemsSensors.com for most current information. LEVEL SWITCHES SINGLE POINTX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for gems sensors manufacturer: Other Similar products are found below : 27051 28196 PS41-20-4MNB-C-FL18 29608 57143 156268 01750 173250 129660 PS41-30-4MNB-C-HC 42295 01801 165570 35651 27A1D0 173931-C 70824 160460 106-P30 1A 155481 87480 PS41-20-4MNB-C-HC 26717 164520 142700 79990 01701 70821 22445 01755 140620 01950 30288 PS41-30-4MNB-C-FL18 155421 160450 131100 43765 116826 142505