LEVEL SENSORS CONTINUOUS Sensors & Controls UCL-510 Transmitter/Multipoint Switching Combo 49-inch (1.25m) range. Compact sensor with 2 dead band and beam width are optimized for small tank applications 1 NPT mounting Reliable, non-contact alternative to float and conductivity level sensors for corrosive, sticky or dirty media Outputs continuous level and provides full pump or valve control PVDF transducer for corrosive liquid media The UCL-510 is a general purpose ultrasonic sensor providing non-contact level detection up to 49.2 (1.25m), with 4 relays for switch or control functions and continuous level measurement. This compact unit offers a non-contact alternative to our float or conductance sensors in small tank chemical feed or handling applications when corrosive, sticky or dirty media is involved. The configuration software, supplied with the sensor, provides flexible system integration or retrofit of existing level devices with configuration control. Integral level automation functions can further reduce system costs through the reduction of external control hardware. The analog output enables local tank level indication, remote PLC monitoring or automation fuctions. Gems UCL-510 is the non-contact solution for small tank level switch, control and measurement. Specifications Typical Applications Range 49.2 (1.25 m) Water and Waste Water Food and Beverage Accuracy 0.125 (3 mm) Control Automation Acids, Inks, Paints Resolution 0.019 (0.5 mm) Chemical Feed Slurries Beam Width 2 (5 cm) Control and Switch Functions Dead Band 2 (5 cm) 2 pumps with 2 alarms Supply Voltage 24VDC (loop) 1 pump with 3 alarms Loop Resistance 400 max. 2 pumps (lead-lag) with 2 alarms Consumption 0.5W 2 pumps (duplexing) with 2 alarms Signal Output 4-20 mA, two-wire (when loop powered) 4 level switch points Contact Type (4) SPST relays 1A Loop Fail-Safety 4 mA, 20 mA, 21 mA, 22 mA or hold last Relay Fail-Safety Power loss: Hold last Power on: Open, close or hold last Hysteresis Selectable Configuration Software PC Windows USB 2.0 Temp. Comp. Automatic over range Process Temp. 20F to 140F (-7C to +60C) Ambient Temp. -31F to +140F (-35C to +60C) Pressure MWP = 30 PSI Enclosure Type 6P encapsulated, corrosion resistant & submersible Encl. Material PC/ABS FR Strain Relief Mat. Santoprene Trans. Material PVDF Cable Length 48 (1.2 m) Cable Jacket Mat. Polyurethane Process Mount 1 NPT (1 G) Mount. Gasket Viton Classification General Purpose Approvals CE, cFMus C-19 Visit www.GemsSensors.com for most current information.trasonicul Versatile Application Configuration Software Free download GemsSensors.com/software Controller Windows XP or 2000 compatible USB 2.0 connection Auto fill/empty Provides configuration, file management (saving, Can control 2 pumps/valves printing, backup), and troubleshooting Lead/lag Duplex The user interface allows you to take complete visual Unused relays may be used as additional alarms control of your set-up and configuration. Using simple menus and visual representations, the confusion of The UCL-510 feature programmable level intelligence and can be reconfigured for target calibration are gone. Once you have completed different sensing duties (such as switch actuation points) after installation. This is an your configuration design, simply click Write to Unit advantage over our float or conductivity type sensors. The user-friendly configuration and the UCL-510 is configured. It also enables multiple software provides un-matched accuracy and programming for control applications. UCL-510s to be configured with just a click of the Multi-function relay control, coupled with 4-20 mA output generates amazing control button. It even generates viewable and printable PDF capabilities. Advanced signal processing techniques provides the UCL-510 with next wiring diagrams of your configurations to simplify and generation digital processing for control. The UCL-510 is level control made simple. ensure proper field installation. Switching Gems supplies the USB Fob required to use the High level alarm (1-4) configuration software with each UCL-510 sensor. Low level alarm (1-4) Replacements or additional Fobs may be ordered Any combination of high and/or low alarms separately. The UCL-510 provides a non-contact alternative to our float and conductivity probes Dimensions multipoint level switches. It combines 4 built in SPST relays, with a selectable hysteresis that eliminates relay chatter from turbulent media. Additionally, non-contact sensors are immune to the performance issues influenced by changes in a medias specific gravity. 48 (1.2 m) Continuous Transmitter Adjustable 4-20 mA output Reversible output 2.00 (51 mm) Interface directly to local display and/or to PLC, SCADA, DCS systems Remote displays/controllers can increase relay functionality The UCL-510 is a good non-contact alternative to our XT float type transmitters for challenging media that can damage moving parts. The UCL-510 is for sticky, scaling or corrosive media. It provides exceptional measurement accuracy (0.125), resolution (0.019) and repeatability ensuring overall system performance reliability. 3.20 (81 mm) 2.70 Wiring (69 mm) Red Blk Wht Grn Blu Org Yel Pur Brn Power Return TX (Out) RX (In) Rly 1 Rly 2 Rly 3 Rly 4 Rly Com 0.89 (23 mm) 1 NPT DEAD BAND 49 How To Order (1.25 m) Select by Part Number. Description Part Number UCL-510 Transmitter/Multipoint Switch with Configuration 225100 Software and Fob Replacement/Additional Configuration Fob 227100 2 (51 mm) C-20 Visit www.GemsSensors.com for most current information. LEVEL SENSORS CONTINUOUS