Test Equipment NEW 5Mhz Function Generator with Frequency Counter Model 4005 Engineers, Technicians, The 4005 is designed to be used, not only Electricians, as a function generator, but also as a Maintenance, Manufacturing, Quality sweep generator, pulse generator and a Control & Educators can frequency counter. all use the 4005 in confidence with its exceptional quality, The VCF (voltage controlled frequency) rugged design & housed produces precision sine, square and in high impact case with convent multiple-position triangle waves over the 0.05Hz to 5MHz handle. for sub-audible, audio, ultrasonic and RF applications. A continuously variable DC offset allows the output to be injected directly into circuits at the correct bias level. Variable symmetry of the output waveforms converts the instrument to a Features: pulse generator capable of generating 4 product in one low cost package rectangular waves or pulses, ramp or Function generator, multiple sawtooth waves and skewed sine waves waveforms of variable duty cycle. Sweep generator, wide sweep range Pulse generator, great accuracy The sweep generator offers linear sweep Frequency counter, 2Hz to 50Mhz with variable sweep rate and sweep with auto range width up to 100:1 frequency change. The 6 digit seven segment, eye pleasing frequency response of any active or green LED display passive device up to 5 MHz can be Display indicates, gate time, MHz, determined. KHz, Hz, mHz The new Model 4005 is a great product for use in a wide range of applications in both analog and digital electronics such as engineering, manufacturing, servicing, maintenance, education and hobbyist Innovative Training Solutions www.globalspecialties.com Test Equipment NEW 5Mhz Function Generator with Frequency Counter = Specifications Model 4005 OUTPUT CHARACTERISTICS Sine, Square, Triangle, Skewed Sine, Pulse, Ramp Sawtooth, Waveforms TTL/CMOS Leveled Square, DC Frequency Range 0.05Hz to 5MHz in 7 Ranges (5, 50, 500, 5k, 50k, 500k, 5M) Frequency Accuracy 2% 2% (5, 50, 500, 5K, 50K, 500K, 5MHz Range, Full Scale) Output Level: Sine & 20 Vpp in open circuit, 10 Vpp into 50 Load Triangle wave Square Wave 19 Vpp in open circuit, 9.5 Vpp into 50 Load Output Impedance 50 5% Attenuator -20 dB fixed and continuously variable (more than 20dB) WAVEFORM CHARACTERISTICS Sine wave -Flatness 3dB to 5 MHz (more than 14Vpp) Distortion Less than 1% at 10 Hz to 100 KHz Square wave -Rise and Less than 25 nS (at 5MHz) Fall Time Triangle wave -Linearity More than 99% at 0.5 Hz to 100 KHz TTL Output -Rise and Less than 30 nS (at 1MHz) Fall Time Output Level TTL Level (H >/ 2.4V, L </ 0.4V) CMOS Output -Rise and Less than 180 nS (at 1MHz) Fall Time Output Level 4V to 15V 2V, Variable DUTY RATIO 1:1 to 10:1 SWEEP FUNCTION CHARACTERISTICS Mode Linear Width Variable from 1:1 to 100:1 Rate 0.5 Hz to 50 Hz (20 mS to 2 S) External VCF Input Input Voltage: 0 to 10 V Input Impedance Approx. 1 K Innovative Training Solutions www.globalspecialties.com