Embedded Systems Design Series
Digital Logic Trainers
DL-020 Sequential Logic Trainer
Global Specialties DL-020 is the second
model in its series of embedded systems
design trainers. The DL-020 teaches students
the advanced concepts of sequential digital
logic design, which is an essential step
towards understanding microprocessor and
microcontroller logic.
Some of the logic
circuits that can be
With the DL-020, all necessary logic
implemented with
components are included and pre-mounted for
this trainer include:
fast, easy implementation of sequential
circuits that are used as the building blocks of
microprocessors. These sequential circuits
SR latch
include the SR latch, D latch, register,
D latch with and memory, finite state machine (FSM), and
several real-life controller examples.
without enable
D flip-flop with and
Global Specialties logic trainer simplifies the
without enable
teaching process by eliminating the need to
Features:
discretely wire ICs as all gate elements are
62-page professionally written lab manual
SR flip-flop
pre-mounted, de-coupled and de-bounced,
authored by university professor, Enoch Hwang,
ready for immediate classroom use. Students
JK flip-flop
PhD.
can spend their time directly on logic training.
iPad version of lab manual available on iTunes
T flip-flop
12 hands-on labs correlated to any textbook for a
Most importantly, the trainer includes a 62-
4-bit register digital logic course.
page professionally written training manual
Sturdy blow molded carrying case makes the
featuring an overview of sequential digital
Serial-to-parallel shift
entire lab lightweight and portable.
logic and 12 corresponding hands-on labs
register
Attractive and easy to use system draws students
enhancing any textbook currently in use.
in to the beauty of digital logic and embedded
4-bit up counter
systems design.
The DL-020 is a complete and ruggedly
4-bit up/down counter
Complete kit with 9V wall adapter and 100
packed trainer that will provide a solid
machined pin hookup wires. No need to buy
learning platform to individuals and classroom
Finite state machine
anything else.
students.
(FSM)
All gate elements are pre-mounted and fully
integrated.
Rotating lights
Expandable breadboard allows the system to grow
controller
as students' knowledge increases.
Car security system Perform experiments using standard TTL logic.
controller
Well regulated 5V power (Vcc) and ground (GND)
points.
Jeopardy contestant
Commonly referenced truth table chart inside the
response controller
case lid.
High quality machined sockets for input and
Traffic light controller
output interconnections.
Other custom
Each gate element is presented in its easy to
controllers visualize graphic form.
Innovative Training Solutions globalspecialties.com
Embedded Systems Design Series
Analog &
DL-020
Digital Logic Trainers
Digital
Design
Workstation
Training Manual
Specifications
Chapter 1: Sequential Logic Design
Sequential
Model DL-020
Trainer
Logic Trainer
Model DL-020
Clock Switch
Chapter 2: Microprocessors
between 1Hz
Introduction to Microprocessors
and 20Hz
Combinational and Sequential Circuit
NOT gate 12
Analogy
2-Input AND gate
Chapter 3: Sequential Logic Circuits
12
Identifying Sequential Circuits
4-Input AND gate 8
Analysis of Sequential Circuits
2-Input OR gate 8 Finite State Machines
Synthesis of Sequential Circuits
4-Input OR gate 8
2-Input XOR gate 12
Chapter 4: Labs
2-Input NAND gate 8
The NAND gate
SR Latch
D Flip-flop 4
D Latch
4-to-1 Multiplexer 4
D Latch with Enable
LEDs 8
D Flip-Flop
7-Segment LED display 1 D Flip-Flop with Enable
Register
Slide switch 8
Binary Up Counter
Push Button switch 3
Car Security System Version 2
270 tie point Bread Board Yes
Rotating Lights Controller
Jeopardy Contestant Response
Vcc & GND tie points Yes
Controller
Hook up wire 100pcs Yes
Traffic Light Controller
9V wall adaptor yes
Regulated 5V supply yes
DL-020 Manual Yes
Width 13.5 in
Length 8.5 in
Height 3.5 in
Weight 3.40 lbs
Innovative Training Solutions globalspecialties.com
2012 Global Specialties 22820 Savi Ranch Parkway Yorba Linda, CA 92887 1-800-572-1028