SFG-20X 5 & 10 MHz Arbitrary/Function Signal Generators Applications Features z 5 MHz Bandwidth (SFG-205) The SFG-20X Series Signal Generators z 10 MHz Bandwidth (SFG-210) are ideally suited for applications where value z 125 MSa/s sample rate and quality are equally important such as for: z 14 bit vertical resolution z 3.5-inch TFT-LCD color display z Educational labs z USB interface Overview z Technical schools z 16k pts arbitrary waveform memory z Internal training The Global Specialties SFG-20X Serieis facilities z 88 built-in predefined arbitrary waveforms are single channel function/arbitrary wave- z Hobbyists form generators, capable of generating a z Store/recall up to 10 instrument settings 10 MHz sine wave (SFG-210). They have an informative, easy-to-read color display, z DDS technology user-friendly controls and a numeric key- z 5 standard output waveforms pad which allows users to easily configure waveform properties. In addition, they fea- z 46 built-in arbitrary waveforms tures non-volatile built-in memory to create, z Modulations: AM, DSB-AM, FM, PM, FSK, store, and recall arbitrary waveforms up to ASK, PWM, Sweep, and Burst 16,000 points with 14-bit vertical resolu- tion. 46 predefined arbitrary waveforms are z EasyWave arbitrary waveform editing also available for output. A standard USB software included interface on the rear panel allows users to easily interface with application software to create and load arbitrary waveforms into the instrument. 22820 Savi Ranch Parkway Yorba Linda, CA 92887 800-572-1028 globalspecialties.com A Cal Test Electronics Company 20160517SDG800 Series DataSheet Specification SFG-210 Model SFG-205 Max. output 5 MHz 10 MHz frequency Output channels 1 Sample rate 125MSa/s Arbitrary waveform 16kpts length Frequency resolution 1Hz vertical resolution 14bits Sine, Square, Ramp, Pulse, Gaussian Noise. 46 built-in Waveform arbitrary waveforms (including DC) Modulation AM, DSB-AM, FM, PM, FSK, ASK, PWM, Sweep, Burst Standard interface USB Host & USB Device Dimension W x H x D=229mm x 105mm x 281mm Attention: All specifications apply to the SFG-20X Series Function/Arbitrary Waveform Generator unless otherwise explanation. To satisfy these specifications, the following conditions must be met first: 1. The instrument has been operating continuously for more than 30 minutes within specified operating temperature range (18C~28C. 2. The temperature variation does not exceed 5. Note: All specifications subject to change.