Rotary Switches Special Function Rotary Switches SERIES 09, 42, 44, 50, 51 Isolated Position FEATURES Protected Switch Positions For Safety, Calibration, or Stand-by Choice of Push- or Pull-To-Turn 1 /2 Diameter, 200 mA and 1 Diameter, 1 Amp Switch 10,000 Cycles of Operation DESCRIPTION An isolated position is one which cannot be reached by the normal rotation. An additional action is required by the operator. It could be either Push-To-Turn, or Pull-To-Turn. After the switch is rotated to the isolated position, releasing the shaft locks the switch in that position. Push or pull again to rotate the switch again. Use isolated positions to protect a switch position from indiscriminate rotation. Such safety positions might include calibrate, off and/or stand-by. DIMENSIONS Series 09 Series 50 & 51 Series 42 & 44 DIM. A + .046 .020 DIM. A + .046 (1,17) (+ 0,05 0,51) .020 (0,51) SOLDER DIM. A LUGS .062 (1,57) PC DIM. A TERMINALS Dimension A Dimension A 1 Deck 1.228 (31,19) 1 Deck 1.371 (34,82) Dimension A 2 Decks 1.496 (38,0) 2 Decks 1.717 (43,61) Solder Lug .893 .025 (22,68 0,64) 3 Decks 1.764 (44,81) 3 Decks 2.063 (52,40) PC Style .897 .025 (22,78 0,64) 4 Decks 2.032 (51,61) 4 Decks 2.409 (61,19) Grayhill part number and date code marked on label. Customer number marked on request. EXTERNAL DIFFERENCES SPECIFICATIONS The isolated position mechanism increases the Materials and Finishes Electrical Ratings depth of the Series 50 and 51 by 0.217 (5,51 Materials and finishes for the isolation The switching elements, and therefore ratings, mm). All other dimensions remain unchanged. mechanism are listed here. are the same in an isolated position switch as in In Series 9, 42 and 44, it has the appearance of Series 50 and 51 a conventional rotary switch. Mechanical life is an additional deck section without terminals, Housing: Zinc casting, tin/zinc-plated also the same. located directly behind the detent system. Shaft: 303 stainless steel Stop Pin and Stop Post: 303 stainless steel Additional Characteristics Spring: Tinned music wire Shaft Movement or Vertical Travel: Series 09 Series 09 .062 .020 (1,57 0,51) Housing: Phenolic for style A Diallyl, for M Series 42 & 44 .070 .020 (1,78 0,51) Shaft: 303 stainless steel, electro-polished Series 50 & 51 .080 .020 (2,03 0,51) Stop Pin and Stop Post: 303 stainless steel Push or Pull Force Required: Spring: Tinned music wire Series 09 1.75 .5 lbs Series 42 and 44 Series 42 & 44 2 .5 lbs Housing: Diallyl per MIL-M-14 Series 50 & 51 2 .5 lbs Shaft: 303 stainless steel Stops: Single pole per deck switches with the Lock Plate: 302 stainless steel maximum number of positions are supplied with Lock Arm: 316 stainless steel stops only on request: 12 positions in 30 throw, Lock Post: Brass, tin/zinc-plated 10 in 36, and 8 in 45. Compression Spring: Tinned music wire Stop Strength: Approximately 7.5 pound-inches for the isolated position stop. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.comRotary Switches Special Function Rotary Switches CHOICES AND LIMITATIONS Standard Military Style Angle Of No. Of Poles Per Positions Shorting Or Style Style** Description Throw Decks Deck Per Pole Non-Shorting 01 to 04 1 02 to 12 N or S 01 to 04 2 02 to 06 N or S 09A 09M Solder Lug 30 01 to 04 3 02 to 04 N or S 01 to 04 4 02 or 03 N or S 01 to 04 5 02 N or S 01 to 03 6 02 N or S 42A 42M Solder Lug 42S Sealed 36 01 to 04 1 02 to 10 N or S 42H 125 Temperature Rating 01 to 04 2 02 to 05 N or S 42HS 125 Temp Rating, Sealed 01 to 04 1 02 to 12 N or S 01 to 04 2 02 to 06 N or S 30 01 to 04 3 02 to 04 N or S 44A 44M Solder Lug 01 to 04 4 02 or 03 N or S 44S Sealed 01 to 04 5 02 N or S 44H 125 Temperature Rating 01 to 04 6 02 N or S 44HS 125 Temp Rating, Sealed 45 01 to 04 1 02 to 08 N or S 01 to 03 2 02 to 04 N or S 01 or 02 3 02 N or S 01 or 02 4 02 N -- 50C Solder Lug -- 50CP PC Mount 36 01 1 02 to 10 N or S -- 50M* Solder Lug, Sealed 2 02 to 05 N or S -- 50MP* Sealed, PC -- 51C Solder Lug 1 02 to 12 N or S -- 51CP PC Mount 30 01 2 02 to 06 N or S -- 51M* Solder Lug, Sealed 3 02 or 03 N or S -- 51MP* PC Mount, Sealed 4 02 or 03 N or S *(Pull-to-Turn only) **For specifics on military qualified products, see Standard Switch Pages. ORDERING INFORMATION CONVENTIONAL NUMBERS Let s isolate position 1 and position 2 from all Indicate this as a SPECIAL switch to ensure Start by creating a conventional switch number other positions and from each other. We indicate in the manner which follows: that no error is made when the order is entered. isolation posts as shown here: Sample part number: 12P1P2P3 4 5 6 7 8 9 10 11 12 To isolate just position 1, describe like this: Series & Style 12P1P2 3 4 5 6 7 8 9 10 11 12 Angle of Throw To isolate positions 1 and 2 from all other SPECIAL Number of Decks positions, but not from each other, do this: 09A30-04-1-12N 12P1 2P3 4 5 6 7 8 9 10 11 12 PULL 12P1P2P3 4 5 6 7 8 9 10 11 12 09A30-01-1-12N Type of Contacts DESCRIBING STOPS Shorting = S When a 1-pole switch has less than the maximum Non-Shorting = N This sample part number orders a Series 9 number of positions, consider also the stop standard style, four deck, one pole per deck, Positions Per Pole system. Following is the arrangement for a 6 Poles Per Deck twelve positions per pole rotary switch with non- position switch with the position 1 isolated. shorting contacts and isolation posts between STOP 1P2 3 4 5 6 STOP Note: No stop arrangement suffix is needed. positions 12 and 1, between 1 and 2, and The word STOP indicates the conventional See Describing Stops. between 2 and 3. switch stops, which limit rotation to positions 1 through 6. To isolate position 1 we insert only DESCRIBING POSITIONS This lengthy order number is required to prevent one isolation postbetween terminals 1 and 2. The Grayhill system for isolating positions lets any possible confusion in ordering the switch. The stop system already prevents rotation you choose the positions to be isolated. Grayhill When we receive your order, we will assign a beyond terminal 1. inserts isolation posts next to the positions to be special short form part number to facilitate In multi-pole switches, the stop system and isolated. Consider a continuous rotation switch future identification of this special switch. This isolation system described for the first pole, of the Series 09A with a 30 angle of throw. The number is sequentially assigned as the need automatically affects the other poles. In the terminals are listed here from 1 through 12 with arises, and is non-descriptive. A typical short example above, isolating position 1 on the first a space between each to indicate where isolation form special part number might be 09YY12345. pole isolates the first position (terminal 7) of posts might be inserted. Contact Grayhill for price. the second pole. See Standard Switch Pages 12 12 345 67 8910 1112 for a 2 pole circuit diagram for a 30 throw Not available through Distributors. switch. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com