Rotary Switches Multi-Deck Rotary Switches ACCESSORIES .060 .002 .625 .010 Internal Tooth LockwasherFigure A bushing to the panel. The kit consists of four (1,52 0,05) (15,88 0,25) 3 items: a grooved hex nut, a keyed washer, a For a /8 bushing. Approximately 0.500 (12,7) DIA. keyed seal and a non-turn washer. Assembly is .376 + .003 .000 outside diameter, .022 (0,56) thickness. Material .154 (9,55 + 0,08 0,00) described on Page J-53. Dimensions of panel is cadmium-plated steel. Part No. 12Q1272-1 .032 .002 + .004 DIA. 1 seal kit items are shown in Figure C. This kit For a /4 bushing. Approximately (0,81 0,05) .000 .437 .010 (3,91 seals the bushing to the panel it does not seal 0.400 (10,16) outside diameter, .018 (11,10 0,25) + 0,10 the shaft to the bushing. Not usable with (0,46) thickness. Material is steel, tin/ 0,00) .120 .003 .125 .010 adjustable stop switches. Part No. 42-24 zinc plated. DIA. FIGURE A (3,18 0,08) (3,18 0,25) FIGURE B Non-Turn WasherFigure B .625 .010 (15,88 0,25) DIA045 .003 .010 .002 .562 (14,27) Can be ordered as extra hardware for the .032 (1,14 0,08) (0,25 0,05) ACROSS .375 + .004 .000 Series 5000, 24, 42, 43, 44, 54, 71B, 53, 57 and .002 FLATS (9,53 + 0,10) DIA. 59 rotary switches. The internal key of the (0,81 0,05) washer slides into the bushing keyway. The .375 .005 right angle tab locks into a predrilled hole on (9,53 0,13) the back side of the mounting panel. Material is C L brass, tin/zinc plated. Part No. 12C1087-1 .187 .010 .088 (2,24)/ .125 .003 (4,75 0,25) .093 (2,36) (3,18 0,08) Panel Seal KitFigure C Non-Turn Washer Seal Keyed Washer Hex Nut Sold as a separate item to seal the switch FIGURE C ORDERING INFORMATION: Single Shaft Switches, Add-A-Pot Switches Series: Determined by the type of switch and the angle of throw Style*: Letter(s) from the Choices and Limitations chart Angle of Throw: Must agree with Series Number Number of Decks: As limited by the angle of throw, the poles per deck, switch style and type of contacts 44M3002112NF Stop Arrangement: Add letter F to a one pole per deck switch with the maximum number of positions for a stop between position 1 and the last position. Leave blank for continuous rotation Type of Contacts: N = Non-shorting S = Shorting Positions Per Pole: Requires 02 positions as a minimum to maximum allowable dependent on the angle of throw and poles per deck. Use AJ for adjustable stops (Styles D and UD). Poles Per Deck: As limited by angle of throw, switch series and style * All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying the military part number identified on the appropriate slash sheet. ORDERING INFORMATION: Concentric Shaft Rotary Switches Series: Determined by the angle of throw, applicable to both sections Style*: Letter(s) from the Choices and Limitations chart Section A (front) Number of Decks: As limited by the number of poles per deck Poles Per Deck: As limited by the angle of throw Positions Per Pole: Requires 02 positions as a minimum to the maximum allowable dependent on the angle of throw and the poles per deck Type of Contacts: N=Non-shorting, S=Shorting. All one pole per deck switches with the maximum number of positions are continuous rotation 43M02110NM03203S Section B (rear) The limitations listed for Section A apply to Section B Type of Contacts Positions Per Pole Poles Per Deck Number of Decks Style * All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying the military part number identified on the appropriate slash sheet. Available from your local Grayhill Distributor For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. Rotary Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com 31X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Switch Fixings category: Click to view products by Grayhill manufacturer: Other Similar products are found below : 893102000 00-5150 LZZ1A 0098.9234 61-9451.0 M2PA-5011 630155 635401 6PA113 6PA147-E6 6PA148-E6 6PA32 6PA9 700109 700303A56 700C1GRY 700C2GRN 704-6001 704.960.4 704.960.9 704.965.2 704.965.6 704.966.0 7089-3 710082-B11 71M1048 757200264 764300000 MHU35 MHU37 807039-1 825.003.011 825.005.011 825.053.011 825.055.011 826.000.071 827.020.011 827.400.021 835.900.023 MML52C10C MML52E10C MML92HGH MML93K 84211M02CNNS 84212M02CNNS 84217A8.0LNOS 842.500.011 843.000.011 843187-000 843487-000