Optical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders SerieS 62C Concentric Shaft FeATUreS APPLiCATiONS Economical Size Used to Set Radio Frequency, Combined Functionality Dr ill Depth, RPM, Menu Selection, Optically Coupled for more than a Parameter Selection for Patient Million Cycles of Operations Monitor ing Devices, etc. Optional Integral Pushbutton Compatible with CMOS, TTL, and HCMOS Logic Available with 12, 16, 24, and 32 Detent Positions for Deck Choices of Cable Length and Ter minations Available in 3.3 Volt Input (contact Grayhill for details) DiMeNSiONS in inches (and millimeters) Unless otherwise specified, standard tolerance are: Linear .025 Deck A: 0.250 (6,35) shaft Diameter .010 Deck B: 0.125 (3,18) shaft .230 .050 Angle 2.0 (5,84 1,27) Suggested Mounting Panel Cutout Pin Version .161.002 4,090 ,05 .380.003 3/8-32 UNEF-2A 4.0 .20 9,650,07 THREAD. TO BE (4.0 5,08) WITHIN .030 (0,76) .100 (2,54) OF SHOULDER STRIPPED .250 .002 AND TINNED (6,35 0,05) .057.002 .125 .002 1,450 ,05 (3,18 0,05) 28 AWG CABLE .250 .005 .250 .005 WIRES ON Cable Version (6,35 0,13) (6,35 0,13) .050 (1,27) CENTER C L .152 .005 (3,86 0,13) .066 .005 (1,68 0,13) .360 .010 .312 .005 .490 .010 (9,14 0,25) (7,92 0,13) (12,45 0,25) .540 .010 .375 .015 (13,72 (9,53 0,38) 0,25) CONNECTOR C IS AMP P/N L 215083-8 .460 .010 (11,68 0,25) .040 (1.02) .094 .004 .250 .005 (2,39 0,1) .580 (6,35 0,13) (14,73) .933 (23,69) REF375 .015 .219 .004 (9,53 0,38) (5,56 0,1) .250 .005 (6,35 0,13) .500 .010 (12,7 0,25) Gr ayhill, Inc. 561 Hillg ro ve Aven ue LaGr ange , Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.g r ayhill.com G R A Y H I L L G R A Y H I L L 62CXXXX-XX-XXXC 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 XXXX X-XOptical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders CirCUiTr Y, Tr UTH TABLe AND WAVeFOrM: Standard Quadrature 2-Bit Code PIN Clockwise rotation POWER +5V 8 Position Output A Output B R* 1 OUTPUT A 7 DECK A 2 R* OUTPUT B 3 6 DECK A R* 4 OUTPUT A 5 DECK B Indicates logic high blank indicates R* logic low. Code repeats ever y 4 positions. OUTPUT B 4 DECK B HIGH N.O. 3 OUTPUT PUSHBUTTON A SWITCH LOW DECK B 2 HIGH OUTPUT B LOW GROUND 1 1 2 3 4 5 6 * External pull-up resistors required for operation (2.2k) POSITION NUMBER SPeCiFiCATiONS Pushbutton Switch ratings Materials and Finishes rotational Life: more than 1,000,000 cycles rating: 5 Vdc, 10 mA, resistive Bushing: Zinc casting of operation (1 cycle = 360 rotation) Contact resistance: less than 10 ohms Shaft: Aluminum (TTL or CMOS compatible) Shaft Push Out Force: 45 lbs minimum Shaft retaining ring: Stainless steel Mounting Torque: 15 in-lbs maximum Voltage Breakdown: 250 Vac between Detent Spring: Stainless steel mutually insulated par ts Operating Speed: 100 RPM maximum Printed Circuit Board: NEMA grade FR-4 Axial Shaft Play: 0.010 max. for each shaft Contact Bounce: less than 4 mS at make, Terminals: Brass, tin-plated less than 10 mS at break Mounting Hardware: One brass, nickel-plated Actuation Life: 3,000,000 operations environmental ratings n u t a n d z i n c - p l a t e d s p r i n g s t e e l w i t h c l e a r Actuation Force: 1000 300 grams Operating Temp. range: -40C to 85C tr ivalent chromate finish lockwasher supplied Pushbutton Travel: .010 / .025 inch Storage Temp. range: -55C to 100C with each switch. (Nut is 0.094 inches thick by relative Humidity: 9095% at 40C, 96 hrs. 0.433 inches across flats) Vibration resistance: Har monic motion with rotor: Ther moplastic encoder ratings Coding: 2-bit quadrature coded output amplitude of 15g, within a var ied 10 to 2000 Code Housing: Reinforced ther moplastic Hz frequency for 12 hours per MIL-STD-202, Operating Voltage: 5 .25 Vdc Pushbutton Dome: Stainless steel Method 204 Pushbutton Housing: Ther moplastic Supply Current: 50 mA maximum at 5 Vdc Logic High: 3.8V minimum Shock resistance: Test 1: Tested at 100g Pushbutton Contact: Brass, nickel-plated for 6 mS, half sine, 12.3 ft/s Test 2: 100g for 6 Dome retaining Disk: Ther moplastic Logic Low: 0.8V maximum Logic rise and Fall Times: less than 30 mS mS, sawtooth, 9.7 ft/s Strain relief: Stainless steel Operating Torque: 2.0 in-oz 1.4 in-oz Cable: 28 AWG, stranded/top coated wire, PVC coated on .050 centers (cable version) initially Header Pins: Phosphor bronze, tin-plated insulator: Glass-filled polyester Spacer: Zinc casting OrDeriNG iNFOrMATiON Series Style: C = Concentr ic Angle of Throw (Deck A): 11 = 11.25 or 32 positions, 15 = 15 or 24 positions, 22 = 22.5 or 16 positions, 30 = 30 or 12 Positions Angle of Throw (Deck B): 11 = 11.25 or 32 positions, 15 = 15 or 24 positions, 18 = 18 or 20 positions, 22 = 22.5 or 16 positions, 30 = 30 or 12 Positions 62C2211- 02-040 C Termination: S = str ipped cable, C = connector, P = pins Cable Termination: 040 = 4.0in. Cable is ter minated with Amp Connector P/N 215083-6. See Amp Mateability Guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62C2211-02-P) Pushbutton Option: 01 = w/o pushbutton 02 = with pushbutton Custom shaft, pushbutton actuation force and ter mination options are available. Available from your local Grayhill Distributor. For pr ices and discounts, contact a local Sales Office, an author ized local Distr ibutor or Grayhill. Gr ayhill, Inc. 561 Hillg ro ve Aven ue LaGr ange , Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.g r ayhill.com