Optical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders SERIES 62H High Torque, Concentric Shaft FEATURES Available in 8,12 and 16 Detent High Rotational Torque Provides Positions Positive Tactile Feedback Choice of Cable Length and Optically Coupled for More than a Terminations Million Cycles Optional Integral Pushbutton APPLICATIONS Compatible with CMOS, TTL and Avionics HCMOS Logic DIMENSIONS in inches (and millimeters) Cable Version Suggested Mounting Panel Cutout .236 5,99 .219 .002 .161 .002 5,56 0,05 .110 4,090 ,05 CONNECTOR IS AMP .380.003 2,79 Pin 1 P/N 215083-8 9,650,07 OR EQUIVALENT Pin 8 .401 .125 .002 .250 .002 10,19 3,18 0,05 6,34 0,05 .057.002 .527 1,450,05 13,39 .066 .002 1,68 0,05 4.000 .200 .490 .200 .094 .002 .250 4.000 5,08 12,45 5,08 2,39 0,05 6,35 .250 6,35 .375 .152 .002 .740 9,53 .817 3,86 0,05 18,8 20,75 .375 .540 .500 9,53 13,72 .878 12,7 .250 22,3 .312 6,35 .750 7,92 19,05 Stripped Version Pin Version 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 (0, 76) OF SHOULDER .335 8,51 .100 2,54 1.126 .015 4.000 .200 28,6 0,38 4.000 5,08 WAVEFORM AND TRUTH TABLE Clockwise Rotation Position Output A Output B HIGH OUTPUT 1 A LOW 2 HIGH 3 OUTPUT B LOW 4 1 2 3 4 5 6 Indicates logic high blank indicates logic low. Code repeats every 4 POSITION NUMBER positions. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.comOptical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders CIRCUITRY POWER 5 V 8 R* OUTPUT A 7 DECK A 100 100 R* OUTPUT B 6 DECK A R* OUTPUT A 5 DECK B R* OUTPUT B 4 DECK B PUSHBUTTON 3 PUSHBUTTON 2 GROUND 1 * External pull-up resistors required for operation (2.2 k ). SPECIFICATIONS Operating Torque: 5.0 in-oz +/- 1.5 in-oz Pushbutton Switch Ratings Materials and Finishes Rating: at 5 Vdc, 10 mA, resistive initial Shafts: Stainless steel Contact Resistance: less than 10 ohms Shaft Push Out Force: 45 lbs minimum Bushing: Zinc casting (TTL or CMOS compatible) Mounting Torque: 15 in-lbs maximum Mounting Hardware: One brass, nickel-plated Pushbutton Life: 3 million actuations Terminal Strength: 15 lbs cable pull-out force nut and zinc-plated spring steel with clear minimum minimum trivalent chromate finish lockwasher supplied Voltage Breakdown: 250 Vac between Operating Speed: 100 RPM maximum with each switch. (Nut is 0.094 inches thick by mutually insulated parts 0.433 inches across flats) Contact Bounce: less than 4 mS at make Environmental Ratings Flex Cable: 28 AWG, stranded/top coated and less than 10 mS at break Operating Temperature Range: -40C to wire, PVC coated on .050 or .100 centers Actuation Force: 1100 300g (cabled version) 85C Shaft Travel: .025.010 inch Header Pins: Brass, tin-plated Storage Temperature Range: -55C to 100C Encoder Ratings This product series is ROHS Compliant. Vibration Resistance: Harmonic motion with Coding: 2-bit quadrature coded output amplitude of 15G, within a varied 10 to 2000 Operating Voltage: 5.0 .25 Vdc Supply Current: 50 mA maximum 5.0 Vdc Hz frequency for 12 hours Logic Output Characterisitics: Mechanical Shock: Test 1: 100G, 6 mS, half Logic High: 3.0 Vdc minimum sine, 12.3 ft/s Test 2: 100G, 6 mS, sawtooth, Logic Low: 1.0 Vdc maximum 9.7 ft/s Mechanical Life: 1,000,000 cycles minimum Relative Humidity: 9095% at 40C for 96 (One cycle is a rotation through all positions hours and a full return) Minimum Sink Current: 2.0 mA for 5 Vdc Power Consumption: 150mW maximum Output: open collector phototransistor Logic Rise and Fall Times: less than 30 mS maximum ORDERING INFORMATION Series Style: H = High Torque, Concentric Angle of Throw (Deck A): 45 = 45 or 8 positions,30 = 30 or 12 positions, 22 = 22.5 or 16 positions Angle of Throw (Deck B): 45 = 45 or 8 positions, 30 = 30 or 12 positions, 22 = 22.5 or 16 positions 62HXXXX-XX-040C Termination: S = stripped cable, C = connector, P = pins Cable Termination: 040 = 4.0in. Cable is terminated with Amp Connector P/N 215083-8. See Amp Mateability Guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62H2222-H9-P) Pushbutton Option: 0 = w/o pushbutton, 9 = 1100g pushbutton Rotational Torque: H = High Torque Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com