Optical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders SERIES 62HN High Torque, Non-Turn Concentric Shaft Compatible with CMOS, TTL and FEATURES HCMOS Logic High Rotational Torque Provides Available in 8,12 and 16 Detent Positive Tactile Feedback Positions Non-turn Pushbutton to Ensure Choice of Cable Length and Pushbutton Text and Orientation Terminations Optically Coupled for More than a Million Cycles APPLICATIONS Seperate Pushbutton Function Avionics DIMENSIONS in inches (and millimeters) CONNECTOR IS AMP Cable Version Pin Version .236 .219 .002 CONNECTOR IS AMP 5,56 0,05 5,99 .110 P/N 215083-8 2,79 Pin 1 OR EQUIVALENT CONNECTOR IS AMP .335 8,51 Pin 8 .125 .002 .250 .002 1.000 .015 .066 .002 3,18 0,05 6,34 0,05 25,4 0,38 1,68 0,05 .490 .200 DIM. 4.000 .200 5,08 12,45 .094 .002 .250 DIM. 4.000 5,08 6,35 2,39 0,05 .250 6,35 .375 .152 .002 .691 9,53 .740 3,86 0,05 17,55 18,8 .375 9,53 .500 .540 .785 12,7 13,72 19,94 .312 .250 7,92 .750 6,35 19,05 Suggested Mounting Panel Cutout Stripped Version 3/8-32 UNEF-2A THREAD .161.002 THREADS TO BE WITHIN 4,090,05 .380.003 .030 (0, 76) OF SHOULDER 9,650,07 .100 2,54 4.000 .200 .057.002 4.000 5,08 1,450 ,05 Unless otherwise specified, standard tolerance is .010 (0,25). CIRCUITRY POWER 5 V 8 R* OUTPUT A 7 DECK A 100 100 R* OUTPUT B 6 DECK A R* NO FUNCTION 5 R* NO FUNCTION 4 PUSHBUTTON 3 PUSHBUTTON 2 GROUND 1 * External pull-up resistors required for operation (2.2 k ). Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.comOptical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders WAVEFORM AND TRUTH TABLE Clockwise Rotation P osition Output A Output B HIGH OUTPUT 1 A LOW 2 HIGH 3 OUTPUT B LOW 4 1 2 3 4 5 6 Indicates logic high blank indicates POSITION NUMBER logic low. Code repeats every 4 positions. SPECIFICATIONS Pushbutton Switch Ratings Shaft Push Out Force: 45 lbs minimum Detent Spring: High carbon steel Rating: at 5 Vdc, 10 mA, resistive Mounting Torque: 15 in-lbs maximum Detent Ball: Stainless steel Contact Resistance: less than 10 ohms Terminal Strength: 15 lbs cable pull-out force Detent Section: Hiloy 610 (TTL or CMOS compatible) minimum Printed Circuit Boards: NEMA grade FR-4 Pushbutton Life: 3 million actuations Operating Speed: 100 RPM maximum gold over nickel or palladium minimum Terminals: Brass, tin-plated Voltage Breakdown: 250 Vac between Mounting Hardware: One brass, nickel-plated Environmental Ratings mutually insulated parts nut and zinc-plated spring steel with clear Operating Temperature Range: -40C to Contact Bounce: less than 4 mS at make trivalent chromate finish lockwasher supplied 85C and less than 10 mS at break with each switch. (Nut is 0.094 inches thick by Storage Temperature Range: -55C to Actuation Force: 1100 300g 0.433 inches across flats) 100C Shaft Travel: .025+/-.010 inch Rotor: Thermoplastic Vibration Resistance: Harmonic motion with Pushbutton Dome: Stainless steel amplitude of 15G, within a varied 10 to 2000 Encoder Ratings Phototransistor: Planar Silicon NPN Hz frequency for 12 hours Coding: 2-bit quadrature coded output Infrared Emitter: Gallium aluminum Mechanical Shock: Test 1: 100G, 6 mS, half Operating Voltage: 5.0 .25 Vdc arsenide Supply Current: 30 mA maximum 5.0 Vdc sine, 12.3 ft/s Test 2: 100G, 6 mS, sawtooth, Flex Cable: 28 AWG, stranded/top coated wire, Logic Output Characteristics: 9.7 ft/s Logic High: 3.0 Vdc minimum PVC coated on .050 centers (cabled version) Relative Humidity: 9095% at 40C for 96 Logic Low: 1.0 Vdc maximum Header Pins: Brass, tin-plated hours Mechanical Life: 1,000,000 cycles minimum Spacer: Hiloy 610 (One cycle is a rotation through all positions Shim: Stainless Steel Materials and Finishes and a full return) Endcap: Thermoplastic Code Housing: Reinforced thermoplastic Minimum Sink Current: 2.0 mA for 5 Vdc Non-turn Pin: Stainless steel Shafts: Stainless steel Power Consumption: 150mW maximum Backplate/Strain Relief: Stainless steel Bushing: Zinc casting Output: open collector phototransistor Studs: Stainless steel Shaft Retaining Rings: Stainless steel Logic Rise and Fall Times: less than 30 mS maximum Operating Torque: 5.0 in-oz +/- 1.5 in-oz initial ORDERING INFORMATION Series Style: HN = High Torque, Concentric, Non-Turn Angle of Throw: 45 = 45 or 8 positions,30 = 30 or 12 positions, 22 = 22.5 or 16 positions 62HNXX-XX-040C Termination: S = stripped cable, C = connector, P = pins Cable Termination: 040= 4.0in. Cable is terminated with Amp Connector P/N 215083-8. See Amp Mateability Guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62HN22-H9-P) Pushbutton Option: 0 = w/o pushbutton, 9 = 1100g pushbutton Rotational Torque: H = High Torque Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com