Optical and Mechanical Encoders Optical Encoders SERIES 62N 1/2 Package, non-turn, Dedicated Shaft Available in 12, 16, 24, and 32 FEATURES Detent Positions (Non-detent Also Non-turn Pushbutton to Ensure Available) Pushbutton Text and Orientation Choices of Cable Length and Seperate Pushbutton Function Terminations Low Cost Economical Size APPLICATIONS Optically Coupled for More than a Global Positioning/Driver Million Cycles Information Systems Compatible with CMOS, TTL and Medical Equipment HCMOS Logic Cockpit Controls DIMENSIONS In inches (and millimeters) Mixing Boards Cable Version CONNECTOR STRIPPED CABLE VERSION VERSION Front View DIM.XX.20 (DIM.XX5,08) .100 (2,54) STRIPPED AND TINNED 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 OF SHOULDER. CONNECTOR IS AMP P/N 215083-6, .050 (1,27) CENTERS P/N 640443-6, .100 (2,54) CENTERS Top View Side View 28 AWG CABLE WIRES ON .050 (1,27) CENTERS .250 .066.002 .219.003 .125.002 (6,35) (1,680,05) (5,60,1) (3,180,05) DIA250 (6,35) .250 (6,35) .540 (13,72) .390 .320 (9,91) (8,13) .250.002 .094.003 .312 REF. (2,40,08) (6,350,05) (7,9) DIA250 .375.015 .375.015 (6,35) (9,50,38) (9,50,38) .152 .592.015 (3,86) (15,040,38) .500 (12,7) .670.015 (17,020,38) Front View .470.020 (11,90,5) .602 (15,29) Top View .301 (7,6) .620 (15,7) .219.003 (5,60,1) .100 (2,54) TYP267.015 (6,80,38) .066 .002 (1,680,05) .940.050 (23,81,3) .522 3/8-32 UNEF-2A THREAD (13,26) .250 THREADS TO BE WITHIN (6,35) .030 OF SHOULDER .540 (13,72) Side View .250 .125.002 .152 (3,180,05) (6,35) .094.003 (3,86) (2,40,08) DIA250 .250 (6,35) (6,35) .500 (12,7) .450.010 (11,430,3) .250 .002 .312 (6,350,05) (7,9) DIA375.015 .375 .015 (9,50,38) (9,50,38) .592.015 (15,040,38) .670.015 Unless otherwise specified, standard tolerances are 0.10 (0,25) (17,020,38) I-13 Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com GRAYHILL 6 5 4 3 2 1 GRAYHILL 62NXX-XXXC XXXX X-X 6 5 4 3 2 1 62NXX-P XXXX X-XOptical and Mechanical Encoders Optical Encoders SPECIFICATIONS Pushbutton Switch Ratings Shaft Push Out Force: 45 lbs minimum Terminals: Brass, tin-plated Rating: at 5 Vdc, 10 mA, resistive Mounting Torque: 15 in-lbs maximum Mounting Hardware: One brass, nickel-plated Contact Resistance: less than 10 ohms (TTL or CMOS compatible) Terminal Strength: 15 lbs cable pull-out force nut and stainless steel lockwasher supplied with Pushbutton Life: 3 million actuations minimum each switch. Nut is 0.094 inches thick by 0.562 minimum Operating Speed: 100 RPM maximum inches across flats Voltage Breakdown: 250 Vac between Rotor: Thermoplastic mutually insulated parts Code Housing: Thermoplastic Environmental Ratings Contact Bounce: less than 4 mS at make and Pushbutton Dome: Stainless steel Operating Temperature Range: -40C to 85C less than 10 mS at break Dome Retaining Disk: Thermoplastic Storage Temperature Range: -55C to 100C Actuation Force: 1000 300g Pushbutton Housing: Thermoplastic Vibration Resistance: Harmonic motion with Phototransistor: Planar Silicon NPN amplitude of 15G, within a varied 10 to 2000 Hz Encoder Ratings Infrared Emitter: Gallium aluminum arsenide frequency for 12 hours Coding: 2-bit quadrature coded output Pushbutton Contact: Brass, nickel-plated Mechanical Shock: Test 1: 100G, 6 mS, half Operating Voltage: 5.0 .25 Vdc Flex Cable: 28 AWG, stranded/top coated wire, sine, 12.3 ft/s Test 2: 100G, 6 mS, sawtooth, 9.7 Supply Current: 30 mA maximum 5.0 Vdc PVC coated on .050 or .100 centers (cabled ft/s Logic Output Characterisitics: version) Relative Humidity: 9095% at 40C for 96 Logic High: 3.8 Vdc minimum Header Pins: Phospher bronze, tin-plated hours Logic Low: 0.8 Vdc maximum Spacer: Thermoplastic Mechanical Life: 1,000,000 cycles minimum Endcap: Thermoplastic (One cycle is a rotation through all positions Materials and Finishes Non-turn Pin: Stainless steel and a full return) Code Housing: Reinforced thermoplastic Minimum Sink Current: 2.0 mA for 5 Vdc Backplate/Strain Relief: Stainless steel Shafts: Aluminum Power Consumption: 150mW maximum Lockwashers: Stainless steel Bushing: Zinc casting Output: open collector phototransistor Hex Nuts: Stainless steel Shaft Retaining Ring: Stainless steel Logic Rise and Fall Times: less than 30 mS Studs: Stainless steel Detent Spring: Stainless steel maximum Printed Circuit Boards: NEMA grade FR-4 Operating Torque: gold over nickel or palladium Detent: 2.0 in-oz 70% initially Non-Detent: less than 1.5 in-oz initially CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code PIN POWER +5V 6 R* 200 OUTPUT A 5 Clockwise Rotation 5% HIGH R* Position Output A Output B OUTPUT OUTPUT B A 4 LOW 1 2 HIGH N.O. 3 OUTPUT 3 PUSH- B LOW BUTTON 4 SWITCH 2 1 2 3 4 5 6 Indicates logic high blank indicates logic low. Code repeats every 4 positions. POSITION NUMBER GROUND 1 * External pull-up resistors required for operation (2.2 k ). ORDERING INFORMATION Series and Style = 1/2 package, non-turn, dedicated shaft Angle of Throw: Detent Non-detent 11 = 11.25 or 32 pos. 01 = 11.25 or 32 positions 15 = 15 or 24 positions 05 = 15 or 24 positions 22 = 22.25 or 16 positions 02 = 22.5 or 16 positions 62N22-020S 30 = 30 or 12 positions 00 = 30 or 12 positions Termination: S = Stripped cable .050 centers SH = Stripped cable .100 centers C = Connector .050 centers CH = Connector .100 centers P = Pin .100 centers Cable Length: 020 = 2.0 inches minimum to 250 = 25.0 inches maximum. Provided in increments of 1/2 inch. Example 035 = 3.5 , 060 = 6.0 . *Eliminate cable length if ordering pins. (Ex: 62N22-02-P) These switches have Quadrature 2-bit code output and an optional shaft actuated pushbutton switch. Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com I-14