Optical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders SERIES 62S Compact 1/2 Package APPLICATIONS FEATURES Global Positioning/Driver Compact Size Information Systems Requires Minimal Behind Panel Space Medical Equipment 1 Million Rotational Cycles for Low and Medium Torque, 1/2 Million for High 3 Million Rotations for Non-Detent Styles Optional Integral Pushbutton Choices of Cable Length and Terminations DIMENSIONS in inches (and millimeters) Unless otherwise specified, standard tolerance is .010 (0,25) Termination: -C Termination: -P .066.002 .125 .066.002 .152.002 (1,680,05) (3,18) (1,680,05) (3,860,05) .152.002 .250 (3,860,05) (6,35) .500 (12,7) .500 (12,7) .250 .050 REF. (6,35) .540 (1,27) .249.002 .540 (13,72) .249.002 (6,320,05) (13,72) .250 .250 .400 (6,320,05) .250 (6,36) (6,35) (10,15) .219.003 (6,35) .219.003 (5,560,07) (5,560,07) .312 3/8-32 UNEF-2A .312 (7,92) THREAD (7,92) 3/8-32 UNEF-2A .687.015 CONNECTOR IS AMP .687.015 THREAD (17,450,38) P/N 215083-6 (17,450,38) OR EQUIVALENT .130 (3,3) .434.015 (11,020,38) .290 (7,34) .290 CABLE LENGTH (7,37) PINS ARE XXX.20 .016 SQUARE .350.015 (XXX5,1) (0,41) (8,880,38) Termination: -PH Termination: -CH .066.002 .066.002 .100 REF152.002 (1,680,05) (1,680,05) (2,54) (3,860,05) .152.002 (3,860,05) .500 .670 .630 (12,7) (17,02) .500 .500 (16) (12,7) (12,7) .250 (6,35) .540 .249.002 (13,72) .540 (6,320,05) .249.002 .500 (13,72) .250 .250 (6,320,05) (12,7) (6,35) .219.003 .250 .455 (6,35) .250 (5,560,07) (6,35) (11,56) (6,35) .219.003 (5,560,07) 4.000.20 .312 3/8-32 UNEF-2A CABLE LENGTH (7,92) THREAD .312 IS MEASURED 3/8-32 UNEF-2A (7,92) .687.015 FROM THE PCB THREAD (17,450,38) .687.015 TO THE BOTTOM (17,450,38) OF THE CONNECTOR .230 (5,84) .574.015 (14,580,38) .290 .290 (7,37) (7,37) CONNECTOR IS PINS ARE .400.015 AMP P/N 640442-6 .025 SQUARE (10,160,38) OR EQUIVALENT (0,64) Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.comOptical and Mechanical Encoders Specifications are subject to change. Please refer to the current datasheet on www.grayhill.com for the most current published specifications for this product. Optical Encoders Termination: -PV Termination: -PHV Shaft Push-Out Force: 45 lbs minimum Materials and Finishes SPECIFICATIONS Shaft Pull-Out Force: 45 lbs minimum Bushing: Zamak 2 Environmental Specifications Terminal Strength: 15 lbs minimum terminal Shaft: Aluminum or Zamak 2 Operating Temp. Range: -40C to 85C pull-out force for cable or header termination Storage Temp. Range: -55C to 100C Cable: Copper stranded with topcoat in PVC Solderability: 95% free of pin holes and voids insulation (Cable version only) Humidity: 96 Hours at 9095% humidity at Connector (.050 Center): PA4.6 with tin over 40C Pushbutton Electrical & Mechanical nickel plated phosphor bronze Mechanical Vibration: Harmonic motion with Specifi cations Connector (.100 Center): Nylon UL94V-2, tin amplitude of 15G s, within a varied frequency Rating: 10 mA at 5 Vdc of 10 to 2000 Hz plated copper alloy Contact Resistance: <10 Solder: Sn/Ag/Cu, Lead-Free, No Clean Mechanical Shock: Test 1: 100G for 6 mS, half Life: 3 million actuations minimum Hex Nut: Nickel, plated with brass sine wave with a velocity change of 12.3 ft/s Contact Bounce: <4 ms Make, <10 ms Lockwasher: Zinc Plated Spring Steel with Test 2: 100G for 6 mS, sawtooth wave with a Break Clear Trivalent Chromate Finish velocity change of 9.7 ft/s Actuation Force: 9-950150 grams, 5-510150 Header: Hi-Temp glass filled thermoplastic grams, 4-400100 grams, 3-30090 grams, UL94V-0, phoshor bronze (pin versions only) Rotary Electrical and Mechanical 2-20075 grams Strain Relief: Glass filled thermoplastic (.100 Specifications Shaft Travel: .025.010 inch center cable versions only) Operating Voltage: 5.00 0.25 Vdc Supply Current: 25mA max at 5.25Vdc Output: Open collector phototransistor, This product series is ROHS Compliant. external pull up resistors are required Output Code: 2-Bit quadrature, channel A OPTIONS leads channel B by 90 electrically during Contact Grayhill for custom terminations, shaft clockwise rotation of the shaft and bushing configurations, rotational torque Logic Output Characteristics: pushbutton force, and code output. Logic High shall be no less than 3.8 Vdc Logic Low shall be no greater than 0.8Vdc Minimum Sink Current: 2.0 mA Power Consumption: 132mW maximum (includes power in 2 pull-up resistors) Mechanical Life: Non-Detent 3 Million Cycles Low & Medium 1 Million Cycles High 1/2 Million Cycles 1 cycle is a rotation through all positions and a full return Torque shall be within 50% of initial value throughout life Mounting Torque: 15 in-lbs maximum Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com