GLS85LP0512P / 1002P / 1004P / 1008P Industrial Grade PATA NANDrive Data Sheet 01.000 June 2011 Features Industry Standard ATA / IDE Bus Interface Expanded Data Protection - Host Interface: 16-bit access - WP /PD pin configurable by firmware for 1) - Supports up to PIO Mode-6 prevention of data overwrites 2) - Data security through user-selectable protection - Supports up to Multi-Word DMA Mode-4 zones - Supports up to Ultra DMA Mode-4 - Security Erase feature Performance 20-Byte Unique ID for Enhanced Security - Sustained sequential data read - - Factory pre-programmed 10-Byte unique ID Up to 50 MByte/sec - User-programmable 10-Byte ID - Sustained sequential data write - Integrated Voltage Detector Up to 39 MByte/sec - Prevents inadvertent Write operations due to Power Management unexpected power-down or brownout - 3.3V power supply Pre-programmed Embedded Firmware - Immediate disabling of unused circuitry without - Executes industry standard ATA/IDE commands Host intervention - Zero wake-up latency - Implements advanced wear-leveling algorithms to substantially increase the longevity of flash media Power Specification - Embedded Flash File System - Active mode Robust Built-in ECC 110mA typical (GLS85LP1008P) 80mA typical (GLS85LP1004P) Industrial Temperature Range 60mA typical (GLS85LP1002P) - -40C to 85C 60mA typical (GLS85LP0512P) 91-ball BGA and LBGA Packages - Sleep mode - 14mm x 24mm x 1.90mm 500A typical (GLS85LP1008P) (GLSLP1002P / 1004P / 1008P) 500A typical (GLS85LP1004P) - 12mm x 24mm x 1.40mm 450A typical (GLS85LP1002P) (GLSLP0512P) 450A typical (GLS85LP0512P) All Devices are RoHS Compliant Product Description The GLS85LP0512P / 1002P / 1004P / 1008P Industrial The integrated NAND flash controller with built-in advanced Grade PATA NANDrive devices (referred to as PATA NAND management firmware communicates with the Host NANDrive in this datasheet) are high-performance, fully- through the standard ATA protocol. It does not require any integrated, embedded flash solid-state drives. They combine additional or proprietary software such as the Flash File an integrated ATA Controller and 512 MByte, 2 GByte, 4 System (FFS) and Memory Technology Driver (MTD). GByte or 8 GByte of NAND flash memory in a multi-chip The PATA NANDrive provides a WP /PD pin to protect package. These products are ideal for solid-state mass critical information stored in the flash media from storage in embedded and portable applications that require unauthorized overwrites. The PATA NANDrive is pre- smaller form-factor and more reliable data storage. programmed with a 10-Byte unique serial ID and has the ATA-based solid-state mass storage technology is widely option of programming an additional 10-Byte serial ID for used in GPS and telematics, in-vehicle infotainment, even greater system security. portable and industrial computers, handheld data collection The PATA NANDrives advanced NAND management scanners, point-of-sale terminals, networking and technology enhances data security, improves endurance and telecommunications equipment, robotics, audio and video accurately predicts the remaining lifespan of the NAND flash recorders, monitoring devices and set-top boxes. devices. This innovative technology combines robust error The PATA NANDrive supports standard ATA/IDE protocol correction capabilities with advanced wear-leveling 1) 2) with up to PIO Mode-6 , Multi-Word DMA Mode-4 and Ultra algorithms and bad block management to significantly DMA Mode-6 interface. The PATA NANDrive device extend the life of the product. provides complete IDE hard disk drive functionality and 1) PATA NANDrive is capable of supporting PIO Mode-6, but Identify- compatibility in a 14mm x 24mm BGA package or a 12mm x Drive information report will show PIO Mode-4 2) PATA NANDrive is capable of supporting Multi-Word DMA Mode- 24mm LBGA package for easy, space-saving mounting to a 4, but Identify-Drive information report will show MWDMA Mode-2 system motherboard. These products surpass traditional storage in their small size, security, reliability, ruggedness and low power consumption. These specifications are subject to change without notice. 06/15/2011 2011 Greenliant Systems 1 S71431 GLS85LP0512P / 1002P / 1004P / 1008P Industrial Grade PATA NANDrive Data Sheet 01.000 June 2011 Contents 1.0 GENERAL DESCRIPTION..................................................................................................................................... 3 1.1 Optimized PATA NANDrive.................................................................................................................................... 3 1.1.1 Microcontroller Unit (MCU)..................................................................................................................................... 3 1.1.2 Internal Direct Memory Access (DMA) ................................................................................................................... 3 1.1.3 Power Management Unit (PMU)............................................................................................................................. 3 1.1.4 SRAM Buffer .......................................................................................................................................................... 3 1.1.5 Embedded Flash File System................................................................................................................................. 3 1.1.6 Error Correction Code (ECC) ................................................................................................................................. 3 1.1.7 Serial Communication Interface (SCI) .................................................................................................................... 3 1.1.8 Multi-tasking Interface ............................................................................................................................................ 3 1.2 NAND Flash ........................................................................................................................................................... 3 1.3 Advanced NAND Management .............................................................................................................................. 3 2.0 FUNCTIONAL BLOCKS......................................................................................................................................... 4 3.0 PIN ASSIGNMENT................................................................................................................................................. 4 4.0 KEY PARAMETERS .............................................................................................................................................. 7 5.0 CONFIGURABLE WRITE PROTECT / POWER-DOWN MODES ......................................................................... 8 5.1 Write Protect Mode................................................................................................................................................. 8 5.2 Power-down Mode ................................................................................................................................................. 8 5.3 Security Erase........................................................................................................................................................ 8 6.0 POWER-ON INITIALIZATION ................................................................................................................................ 8 7.0 ATA/IDE HOST INTERFACE ................................................................................................................................. 8 7.1 Serial Communication Interface (SCI) .................................................................................................................... 8 8.0 LIFETIME EXPECTANCY...................................................................................................................................... 8 9.0 POWER-ON AND BROWN-OUT RESET CHARACTERISTICS............................................................................ 9 10.0 SOFTWARE INTERFACE...................................................................................................................................... 9 10.1 I/O Transfer Function ............................................................................................................................................. 9 10.2 Command Description.......................................................................................................................................... 10 10.2.1 Identify-Drive ECh ............................................................................................................................................. 11 10.2.2 Set-Features EFh.............................................................................................................................................. 20 10.2.3 Idle 97h or E3h.................................................................................................................................................. 21 10.2.4 Set-Sleep-Mode 99h or E6h.............................................................................................................................. 21 10.2.5 Set-WP /PD -Mode - 8Bh ................................................................................................................................... 21 10.2.6 Error Posting ........................................................................................................................................................ 22 11.0 ELECTRICAL SPECIFICATIONS ........................................................................................................................ 23 11.1 Absolute Maximum Ratings.................................................................................................................................. 23 11.1.1 Absolute Maximum Power Pin Stress Ratings ..................................................................................................... 23 11.2 Operating Ratings ................................................................................................................................................ 23 11.3 AC Characteristics................................................................................................................................................ 23 11.3.1 AC Conditions of Test .......................................................................................................................................... 23 11.4 Recommended System Power-on Timing ............................................................................................................ 24 30) 11.5 Reliability Characteristics ................................................................................................................................. 24 30) 11.6 Capacitance ..................................................................................................................................................... 24 11.7 Purge Erase Time ................................................................................................................................................ 24 11.8 DC Characteristics ............................................................................................................................................... 25 12.0 APPENDIX ........................................................................................................................................................... 26 12.1 Differences between the PATA NANDrive and the ATA Specifications................................................................ 26 12.1.1 Idle Timer ............................................................................................................................................................. 26 12.1.2 Recovery from Sleep Mode.................................................................................................................................. 26 12.2 Reflow Profile ....................................................................................................................................................... 26 12.3 Product Ordering Information ............................................................................................................................... 27 12.4 Packaging Diagram .............................................................................................................................................. 28 12.4.1 FTE Package........................................................................................................................................................ 28 12.4.2 LBTE Package ..................................................................................................................................................... 29 12.5 Reference Documents.......................................................................................................................................... 30 12.6 Revision History................................................................................................................................................... 30 These specifications are subject to change without notice. 06/15/2011 2011 Greenliant Systems 2 S71431