TANTALUM DIPPED / RADIAL POLAR PERFORMANCE CHARACTERISTICS CAPACITANCE/VOLTAGE RANGE: AC RIPPLE VOLTAGE: Permissible AC ripple volt- T35X/T39X: 0.1-680F, 3-50 Volts. age is related to equivalent series resistance T36X: 0.1-330F, 6-50 Volts. (ESR) and power dissipation capability. Maximum power dissipation for each case size is listed in CAPACITANCE TOLERANCE: Available in stan- Table below. For additional description see page dard EIA nominal values with 20% and 10% 78. standard. Case Power Dissipation Size (max.) 25C (watts) DISSIPATION FACTOR: Maximum DF limits are shown in corresponding series part number list- T35X, A .040 T39X B .050 ings. See Application Notes Section, page 76 for C .060 additional information. D .065 E .070 DC LEAKAGE CURRENT: Maximum leakage val- F .080 G .090 ues at 25 are shown in part number listings, H .100 pages 63-65, 67, 68 and 70. See Application J.110 Notes Section, pages 76 & 77 for additional infor- K .120 mation. L .130 M .140 RATED VOLTAGE WORKING VOLTAGE SURGE T36X A .050 VOLTAGE REVERSE VOLTAGE: See Application B .075 C .090 Notes Section, pages 76 & 77 for description. D .135 Maximum Power Dissipation Capability 25C IMPEDANCE and ESR: See Application Notes Section, page 77 & 78 for description. Reference ESR values are shown in table below. ENVIRONMENTAL CONSIDERATIONS: A. Shock Test: MIL-STD-202, Method 213. B. Thermal Shock, MIL-STD-202, Method 107, Commercial T35X/T36X/T39X ESR (OHMS) at 100 kHz +25C Condition A. (The ESR values provided below are for reference only. No warranty, as stated on page 3 and reincorporated here, is made as to the accuracy C. Moisture Resistance: MIL-STD-202, of these values for any particular T35X, T36X, T39X Series product.) Method 106. Cap. 6 10 16 20 25 35 50 D. Solderability: MIL-STD-202, Method 208. F Volt Volt Volt Volt Volt Volt Volt For additional Environmental Test Information 0.10 26.0 26.0 0.15 21.0 21.0 see pages 80, 81 and 82. 0.22 17.0 17.0 0.33 15.0 15.0 0.47 13.0 13.0 LEAD MATERIAL: Effective June 30, 2005 the 0.68 10.0 10.0 T35x, T368 and T39x Series will be available, as an 1.00 10.0 10.0 8.0 8.0 1.50 10.0 9.0 8.0 6.0 5.0 option, with 100% Matte Tin (RoHS compliant) lead wire 2.20 13.0 8.0 7.0 6.0 5.0 3.5 or Sn/Pb lead wire. Please see page 63 for part number 3.30 13.0 10.0 6.0 5.5 5.0 4.0 3.0 4.70 10.0 8.0 5.0 4.5 4.0 3.0 2.5 ordering information. The T363 and T369 lead mater- 6.80 8.0 6.0 4.0 3.6 3.1 2.5 2.0 ial will remain Sn/Pb solder coated steel core with a 10.0 6.0 5.0 3.2 2.9 2.5 2.0 1.6 15.0 5.0 3.7 2.5 2.3 2.0 1.6 1.2 copper ply per MIL-STD-127 and at this time will not 22.0 3.7 2.7 2.0 1.8 1.5 1.3 1.0 be available with a 100% Sn option. 33.0 3.0 2.1 1.6 1.4 1.2 1.0 47.0 2.0 1.7 1.3 1.2 1.0 0.8 68.0 1.8 1.3 1.0 0.9 0.8 100.0 1.6 1.0 0.8 0.6 LEAD TAPE AND REEL: Reeling per specification 150.0 0.9 0.8 0.6 RS-468. See pages 72 - 74 for additional information. 220.0 0.9 0.6 330.0 0.7 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 61 Tantalum Dipped / Radial PolarTANTALUM DIPPED / RADIAL - POLAR T350, T351, T352, T353, T354, T355 & T356 SERIES ULTRADIP II The KEMET UltraDip II Capacitors offer the designer of quality The plastic case provides a tough barrier coating and maintains pre- instruments and entertainment systems the widely recognized cision of lead wire spacing within 0.015 inch. The gold color epoxy advantages inherent in solid tantalum capacitors at competitive utilized permits Laser marking with outstanding permanency and prices. legibility. All case sizes are printed with capacitance, voltage, polar- ity and vendor identification. The UltraDip II Series, miniature dipped solid tantalum capacitors, provide the designer with the advantage of compactness plus low Solid tantalum devices exhibit no degradation failure mode during leakage and low DF performance characteristics for filtering, shelf storage and show a constantly decreasing failure rate (i.e., bypassing, coupling, blocking and RC timing circuits. This series fea- absence of wearout mechanism) during life tests. tures a capacitance range from 0.1 to 680 microfarads at voltages The UltraDip II Series provides self-insulating cases which are from 3 to 50 VDC. UltraDip II capacitors utilize the same sophisti- resistant to shock and vibration. These capacitors exhibit low DCL, cated materials and processes which have advanced KEMET ESR and Impedance and have excellent temperature stability. Electronics Corporation to the leadership position in solid tantalum Effective June 30, 2005 the T35x Series is RoHS compliant. capacitors. CAPACITOR OUTLINE DRAWINGS T350 T351 T352 T353 T354 T355 T356 .250.025 (6.35.64) D D D D D D D Max. Max. Max. Max. Max. Max. Max. H HH H H HH H H Max. Max. Max. Max. Max.Max. Max. Max. .187.032 .187.032 .187.032 .187.032 .187.032 .187.032 .50.05 .02 .02.02 **.02 (4.75.81) (0.5) (4.75.81) (4.75.81) (4.75.81) (4.75.81) (4.75.81) (0.5)(0.5) (0.5) .20 .20 .250 .10 (5.08) (5.08) (6.35) .125 .20 Lead Spacing (2.54) (3.18) (5.08) See Note 2 *Lead Tolerance = .015 ( .38 mm) ** All Lead Diameters = .02 .002 (0.5 .05 mm) DIMENSIONS INCHES (MILLIMETERS) All T350 T351 T352 T353 T354 T355 T356 (1) (1) (1) (1) (1) (1) Case D H H H H H H(1) H Size Max Diameter Max Height Max Height Max Height Max Height Max Height Max Height Max Height A .175 (4.5) .280 (7.1) .380 (9.6) .400 (10.2) .400 (10.2) .340 (8.6) .340 (8.6) .340 (8.6) B .175 (4.5) .300 (7.6) .390 (9.9) .410 (10.4) .410 (10.4) .350 (8.9) .350 (8.9) .350 (8.9) C .196 (5.0) .330 (8.4) .420 (10.7) .440 (11.2) .440 (11.2) .380 (9.6) .380 (9.6) .380 (9.6) D .196 (5.0) .340 (8.6) .430 (10.9) .450 (11.4) .450 (11.4) .390 (9.9) .390 (9.9) .390 (9.9) E .216 (5.5) .350 (8.9) .440 (11.2) .460 (11.7) .460 (11.7) .400 (10.2) .400 (10.2) .400 (10.2) F .236 (6.0) .390 (9.9) .480 (12.2) .500 (12.7) .500 (12.7) .440 (11.2) .440 (11.2) .440 (11.2) G .250 (6.3) .400 (10.2) .490 (12.4) .510 (13.0) .510 (13.0) .450 (11.4) .450 (11.4) .450 (11.4) H .300 (7.6) .400 (10.2) .500 (12.7) .520 (13.2) .520 (13.2) .470 (11.9) .470 (11.9) .470 (11.9) (2) J .330 (8.4) .500 (12.7) .580 (14.7) .550 (14.0) .550 (14.0) (2) K .350 (8.9) .530 (13.5) .630 (16.0) .610 (15.5) .610 (15.5) Note 3 Note 3 Note 3 (2) L .350 (8.9) .630 (16.0) .730 (18.5) .710 (18.1) .710 (18.1) (2) M .400 (10.2) .670 (17.0) .760 (19.3) .740 (18.8) .740 (18.8) NOTES: (1) All H Dimensions are from Capacitor seating plane to top of Capacitor. (2) On T350 Series, case sizes A-H are supplied with .100(2.54) lead spacingcase sizes J-M are supplied with .200(5.08) lead spacing. (3) These case sizes are not available for T351, T352 & T355 capacitors. LEAD CONFIGURATION & SPACING CHART LEAD SERIES CASE CONFIGURATION T350 T351 T352 T353 T354 T355 T356 .100 X X .125 X .200 X X X .250 X A-H STRAIGHT LEAD X STAND OFF X X X X X SNAP-IN X .100 .125 .200 X X X .250 X J-M STRAIGHT LEAD X T350 T351 T352 T353 T354 T355 T356 STAND OFF X X SNAP-IN X 62 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE