FM203-15 Hakko

Replacement Tips and Nozzles T8 series For Model FM-2022 *1set: 2pcs 115 Unit : mm T8-1001 CHIP 0.5I T8-1002 CHIP 0.5C T8-1003 CHIP 1L T8-1004 CHIP 2L T8-1013 CHIP 3L 0.7 0.7 0.5 1 0.7 2 0.7 3 For lead-free soldering C H I P T8-1005 SOP 6L T8-1006 SOP 8L T8-1007 SOP 10L T8-1008 SOP 13L 0.7 0.7 0.7 10 8 0.7 6 13 S O T8-1009 SOP 16L T8-1010 SOP 20L T8-1011 SOP 25L T8-1012 SOP 18L P 0.7 16 0.7 0.7 20 25 0.7 18 T9 series Soldering Iron FM-2027 Parallel Remover Model FM-2022 For Model FM-2023 *1set: 2pcs 65 New more-advanced multifunctional station. Equipped with 2 connection ports to enable a single station to simultaneously play 2 roles. - - - T9 I CHIP I T9 L1 CHIP 1L T9 L2 CHIP 2L C H I P N1series For Model FM-2024 106 N1-06 Nozzle 0.6mm N1-08 Nozzle 0.8mm N1-10 Nozzle 1.0mm N1-13 Nozzle 1.3mm 10.7 10.7 10.7 10.7 Mini Parallel Remover Model FM-2023 Desoldering Tool Model FM-2024 N1-16 Nozzle 1.6mm N1-20 Nozzle 2.0mm N1-23 Nozzle 2.3mm N1-L10 Long Nozzle 1.0mm 10.7 10.7 10.7 16.7 Specifications and design are subject to change without notice. Copyright Hakko Corporation.All right reserved. CA00288BbBa001 Nov. 2007 HEAD OFFICE 4-5, SHIOKUSA 2-CHOME, NANIWA-KU, OSAKA, 556-0024 JAPAN TEL:+81-6-6561-3225 FAX:+81-6-6561-8466 A single station plays multiple roles: Soldering, desoldering and SMD rework. This new station with 2 connection ports allows users to use it more comfortably. Two connection ports Sleep function Two soldering irons can be connected at the After the iron is inserted into the iron holder, the same time, which allows users to select and use sleep function activates for a user-settable time the appropriate one without having to connect (0 to 29 min.) and the tip temperature will de- them alternatively. crease to approximately 200C. Powerful thermal recovery Auto power shut-off function The composite tip provides powerful thermal re- When 30 minutes have elapsed after inserting the covery and stable temperature accuracy. iron into the iron holder, the auto power shut-off Thermal Recovery Graph function activates and stops to apply power to the HAKKO FM-203 Temp(C) heating element. 400 HAKKO 937 Connect the FM-203 station 350 connecting cable and FH-200 iron holder using 300 a connecting cable. 250 200 Test criteria 150 Board: Paper phenol copper *It is necessary to change unit settings before using sleep and auto power shut-off functions. 100 Solder: 1.6 x 5mm Cycle: Every 3 sec. Lead-free solder is used. 50 0 50 100 150 200 250 300 350 400 Time(sec.) Station + One Soldering Iron Desoldering Soldering SMD rework Combination examples of handpieces which can be connected. Greatly improved workabi- lity Parallel Remover Soldering Iron Desoldering Tool Since all handpieces cannot be connected Small ergonomic-style grip to each connector port, refer to the following Lightweight grip provides and light weight provides fa- table. fatigueless work even for tigueless work. extended jobs. New design prevents clo- Four colored sleeves are Unique parallel movement gging provided. Using color-co- of tips allows easy grip New design with reduced di- ding for tip shape enables and release and applies h- stance between the nozzle convenient work. eat optimally. and end and filter pipe pre- The lock-type sleeve ena- Parallel movement vents clogging by sucked-up bles it to be firmly secured. solder. Easy maintenance D S Uses disposable paper filter pipes. Allows paper and sol- der to be disposed of sepa- Channel D Channel S Handpiece connector connector rately. Direct heating reduces da- FM-2027 Quick nozzle replacement. mage to neighboring sensi- Nozzle can be replaced saf- *1 Mini Parallel Remover FM-2022 tive components compa- ely with the provided nozzle red to hot air systems. *1 remover. FM-2023 N2 system FM-2022: Safe design *2 FM-2024 -Can be used for chips and Equipped with a nozzle lock Example setup *3 flat packages up to 25mm FM-2026 function. Inserting a nozzle in size. FM-2026 N2 soldering iron into the grip automatically *1 If the FM-2022 or the FM-2023 handpiece is connected to the channel FM-2023: FX-780 N2 generator locks it in place and prevents D connector the other handpiece connected to the channel S connec- -Standard or reverse twee- tor can be used with it at the same time. If either handpiece is used, the nozzle cartridge from be- FX-791 N2 station (N2 air- DCB (Desoldering Control Box) the non-used handpiece will be automatically subject to sleep mode. zers action can be selec- ing pulled out suddenly. flow meter) *Before using the FM-2024 unit, connect *2 If two FM-2024 handpieces are connected to both channel connectors ted with a switch lever. it to the desoldering control box and Selectable grip connect each of them to the desolder control box. compressor. -Equipped with a small er- *3 The N2 generator and N2 airflow meter must be connected before us- Detachable handle allows t- ing the FM-2026. gonomic grip. wo-way use: gun type or str- Fur further details, refer to the N2 system brochure. *Fur further details, refer to the N2 system brochure. aight type.