TechnicalData Sheet BERGQUIST BOND PLY TBP 400P Known as BERGQUIST BOND-PLY 660P October -2018 PRODUCT DESCRIPTION TYPICAL PROPERTIES Thermally Conductive, Film Reinforced,Pressure Sensitive Physical Properties Adhesive Tape . Glass Transition Temperature ,ASTM E1356,C -30 Flammability Rating, UL 94 V-0 Technology Acrylic Appearance Lightbrown Adhesion Properties Reinforcement Carrier PolyimideFilm Lap Shear Strength ,ASTM D1002: Total Thickness 0.203 mm 25C MPa 0.7 Application Thermal management, (psi) (100) Thermally conductive adhesive After 5 hours 100C MPa 1.4 Operating Temperature -40 to 125C (psi) (200) Range After 2 minutes 200C MPa 1.4 (psi) (200) FEATURES AND BENEFITS 2 Thermal impedance: 0.87C-in /W 50 psi Highly puncture resistant Polyimidereinforcement carrier Electrical Properties Double- sided,pressure sensitive adhesive tape DielectricBreakdown Voltage ,ASTM D149,Vac 6,000 Provides a mechanical bond, eliminating the need for Thermal Properties mechanical fasteners or screws Thermal Conductivity ,ASTM D5470,W/(m-K) 0.4 TYPICAL APPLICATIONS Thermal Performance vs. Pressure Heat sink onto BGA graphic processor TO-220 Thermal Performance ,C/W : Heat sink onto drive processor 10 psi 5.48 Heat spreader onto power converter PCB 25psi 5.47 Heat spreader onto motor control PCB 50psi 5.15 BERGQUIST BOND PLY TBP 400P is a thermally conductive, 100 psi 5.05 electrically insulating, double sided pressure sensitive 200 psi 5.0 adhesive tape . The tape consists of a high performance, 2 (1) Thermal Impedance ,ASTM D5470,C-in /W : thermally conductive acrylic adhesive coated on both sides ofa 10 psi 0.83 Polyimide film. Use BERGQUIST BOND PLY TBP 400P in 25psi 0.82 applications to replace mechanical fasteners or screws . 50psi 0.81 100 psi 0.8 SHELF LIFE 200 psi 0.79 The double- sided, pressure sensitive adhesive used in LOCTITE BERGQUIST BOND PLY products requires the use ofdual liners to protect the surfaces from contaminants. I)The ASTM D5470test fixture was used. The recorded value includes interfacialthermal resistance. These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. The recommended shelf lifefor BERGQUIST BOND PLY TBP 400P is 6 months at a maximum continuous storage temperature of 35C or 3-months at a maximum continuous GENERAL INFORMATION storage temperature of 45C,for maintenance of controlled For safe handling information on this product, consult the Safety adhesion to the liner. Data Sheet, (SDS). Not for product specifications The shelf lifeofthe Bond Ply material, without consideration of The technical data contained herein are intended as reference liner adhesion (which is often not criticalfor manual assembly only. Please contact your local quality department for processing), is recommended at 12 months from date of assistance and recommendations on specifications for this manufacture at a maximum continuous storage temperature of product. 60C.TDS BERGQUIST BOND PLY TBP 400P, October -2018 Trademark usage: Except as otherwise noted Alltrademarks inthis document CONFIGURATIONS AVAILABLE are trademarks and/or registered trademarks of Henkel and its affiliatesin the BERGQUIST BOND PLY TBP 400P are supplied in: U.S.and elsewhere. Roll form Die-Cut parts Reference 1 Conversions (C x 1.8)+ 32 =F kV/mm x 25.4=V/mil mm /25.4=inches N x 0.225=lb N/mm x 5.71=lb/in psi x 145=N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142=ozin mPas =cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. The product can have a variety of differentapplications as well as differingapplication and working conditions in your environment that are beyond our control. Henkel is, therefore, not liablefor the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liabilityinrespect ofthe information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount ofthe concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, therefore, not liablefor the suitability ofour product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability ofour product. Any liabilityinrespect ofthe information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except in relation to death or personal injury caused by our negligenceand any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believedto be reliable.We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose ofany production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and ofpersons against any hazards that may be involved inthe handling and use thereof. In light of the foregoing,Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.This product may be covered by one or more United States or foreignpatents or patent applications. Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics