Technical Data Sheet BERGQUIST GAP FILLER TGF 1000SR Known as BERGQUIST GAP FILLER1000SR October -2018 PRODUCT DESCRIPTION TYPICAL APPLICATIONS A thermally conductive, liquid gap fillermaterial . Automotive electronics (HEV,NEV, batteries) Computer and peripherals Technology Silicone Between heat-generating semiconductors or magnetic components and a heat sink Appearance (cured) Violet Appearance -Part A Violet Telecommunications Appearance -Part B White Cure Room temperature cure or Heat cure TYPICAL PROPERTIES OF UNCURED MATERIAL Application Thermal management, Viscosity ,Capillary ,ASTM D5099,mPas (cP) : -1 TIM(Thermal Interface Material) Shear rate of 4,500 s 20,000 Mix Ratio by weight: 1 :1 Density, ASTM D792,g/cc 2.0 Part A:Part B Pot life 25 C ,ARES Parallel Plate Rheometer - 60 Mix Ratio by volume: 1 :1 Working lifeas liquid, time for modulus to double , Part A:Part B minutes Solids Content, % 100 ShelfLife 25C ,days 180 Operating Temperature -60 to 175C Range TYPICAL CURE SCHEDULE Cure Schedule FEATURES AND BENEFITS 20 hours 25C Thermal Conductivity: 1.0W/m-K 10 minutes 100C Excellent slump resistance (stays inplace) ARES Parallel Plate Rheometer, work lifeas liquid, time for Ultra- conforming, with excellent wet-out for low stress modulus to double. interface applications 100% solids -no cure by-products The above cure profiles are guideline recommendations. Cure Excellent low and high temperature mechanical and conditions (time and temperature) may vary based on chemical stability customers experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures. BERGQUIST GAP FILLER TGF 1000SR is a two-part, thermally conductive, liquid gap fillingmaterial that features superior slump resistance .The mixed system will cure at room temperature and can be accelerated with the addition of heat . TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties Unlike cured thermal pad materials, a liquid approach offers Hardness, Shore 00,ASTM D2240 75 infinitethickness variations with little or no stress to sensitive components during assembly . As cured, BERGQUIST GAP Heat Capacity ,ASTM D1269,J/g-K 1.0 FILLERTGF 1000SR will provide a soft, thermally conductive, Flammability, UL 94 V-0 form-in place elastomer that is ideal for fragile assemblies, capable of fillingunique and intricate air voids and gaps . Electrical Properties Dielectric Strength ,ASTM D149,V/mil 500 BERGQUIST GAP FILLERTGF 1000SR exhibits low level Dielectric Constant ,ASTM D150 1,000 Hz 5.1 natural tack characteristics and is intended for use in 11 Volume Resistivity ,ASTM D257,ohm-meter 110 applications where a strong structural bond is not required . Thermal Properties Thermal Conductivity ,ASTM D5470 ,W/(m-K) 1.0 GENERAL INFORMATION For safe handling information on this product, consult the Safety Data Sheet, (SDS).TDS BERGQUIST GAP FILLERTGF 1000SR , October -2018 Not for product specifications Disclaimer The technical data contained herein are intended as reference Note: The information provided in this Technical Data Sheet (TDS) including the only. Please contact your local quality department for recommendations for use and application of the product are based on our assistance and recommendations on specifications for this knowledge and experience of the product as at the date of this TDS. The product product. can have a variety of differentapplications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, The above cure profiles are guideline recommendations. Cure therefore, not liable for the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended conditions (time and temperature) may vary based on applications and results. We strongly recommend that you carry out your own customers experience and their application requirements, as prior trials to confirm such suitability of our product. well as customer curing equipment, oven loading and actual Any liability inrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product is excluded, oven temperatures. except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liability under any applicable mandatory CONFIGURATIONS AVAILABLE product liability law. BERGQUIST GAP FILLERTGF 1000SR is available in the In case products are delivered by Henkel Belgium NV, Henkel Electronic following configurations: Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Cartridges Henkels liability will inno event exceed the amount of the concerned delivery. Kits In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the STORAGE recommendations for use and application of the product are based on our Store product in the unopened container in a dry location. knowledge and experience of the product as at the date of this TDS. Henkel is, therefore, not liable for the suitability of our product for the production processes Storage information may be indicated on the product container and conditions in respect of which you use them, as well as the intended labeling. applications and results. We strongly recommend that you carry out your own prior trials to confirm such suitability of our product. Optimal Storage: 5 to 25C for a 6 month shelf life,insealed Any liability inrespect of the information inthe Technical Data Sheet or any other containers with moisture barrier packaging. written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liability under any applicable mandatory Conversions product liability law. (C x 1.8)+ 32 =F In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is kV/mm x 25.4 =V/mil applicable: mm /25.4 =inches The data contained herein are furnished for information only and are believed to N x 0.225=lb/F be reliable. We cannot assume responsibility for the results obtained by others N/mm x 5.71=lb/in over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned psi x 145 =N/mm herein and to adopt such precautions as may be advisable for the protection of MPa =N/mm property and of persons against any hazards that may be involved inthe handling Nm x 8.851 = lbin and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of Nm x 0.738=lbft merchantability or fitness for a particular purpose, arising from sale or use Nmm x 0.142 =ozin of Henkel Corporations products. Henkel Corporation specifically mPas =cP disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more United States or foreign patents or patent applications. Trademark usage: Except as otherwise noted Alltrademarks inthis document are trademarks and/or registered trademarks of Henkel and its affiliates in the U.S. and elsewhere. Reference 2 Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.2891.8000 For the most direct access to local sales and technical support visit: www.henkel.com/electronics