Technical Data Sheet BERGQUIST GAP PAD TGP 1000HD Known as BERGQUIST GAP PAD 1000HD November -2018 PRODUCT DESCRIPTION Between any heat- generating semiconductor and a heat Highly Durable, Conformable, Thermally Conductive, Gap sink FillingMaterial . TYPICAL PROPERTIES OF CURED MATERIAL Technology Silicone Physical Properties Appearance Gray/Black Hardness, Shore 00,ASTM D2240,Bulk rubber 40 Reinforcement Carrier Polyimide Heat Capacity ,ASTM E1269,J/g-K 1.0 Thickness 0.508 to 3.175 mm Density ,ASTM D792,g/cc 2.1 ASTM D374 Flammability, UL 94 V-0 (1) Inherent Surface Tack 1 (1 or 2 side) Young s Modulus ,ASTM D575 kPa 414 Application Thermal management, (psi) (60) TIM(Thermal Interface Material) Operating Temperature -60 to 180C Electrical Properties Range Dielectric Breakdown Voltage ,ASTM D149,VAC >10,000 Dielectric Constant ,ASTM D150 ,1,000Hz 5.5 11 Volume Resistivity ,ASTM D257 ,ohm-meter 110 FEATURES AND BENEFITS Thermal Conductivity: 1.0W/m-K Thermal Properties Designed for highdurability applications Thermal Conductivity ,ASTM D5470 ,W/(m-K) 1.0 Robust Polyimide carrier provides excellent voltage (2) Thermal Impedance ,0.040 breakdown, puncture and tear resistance 2 ASTM D5470 ,C-in /W : Highly conformable 10% Deflection 1.7 Ease of handlingand rework inapplications 20% Deflection 1.59 30% Deflection 1.47 BERGQUIST GAP PAD TGP 1000HD was designed to withstand applications requiring highdurability . The coated (1) Youngs Modulus, calculated using 0.01in/min.step rate of strain with a sample size of polyimide carrier on one side of the material allows easy 0.79inch rework, excellent handling characteristics and puncture (2) The ASTM D5470 test fixture was utilized. The recorded values include the interfacial thermal resistance. The values are provided for reference only. Actual application resistance . performance isdirectly related to the surface roughness, flatnessand pressure applied The conformable and elastic nature of BERGQUIST GAP PAD TGP 1000HD allows excellent interfacing and wet-out GENERAL INFORMATION characteristics, even to surfaces with a high degree of For safe handling information on this product, consult the roughness or uneven topography . The asymmetric Safety Data Sheet, (SDS). construction of BERGQUIST GAP PAD TGP 1000HD provides minimaltack on the polyimide side,with highinherent tack on the upcoated side.BERGQUIST GAP PAD TGP 1000HD can Not for product specifications be assembled with manual or automated processes . The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product. TYPICAL APPLICATIONS Highdurability applications CONFIGURATIONS AVAILABLE Automotive energy storage: Ultra capacitors, batteries, BERGQUIST GAP PAD TGP 1000HD isavailable inthe power transmissions,power inverters following configurations: Industrial automotive applications such as trucks, busses and trains Sheet form and die-cut parts Computer and peripherals TelecommunicationsTDS BERGQUIST GAP PAD TGP 1000HD, November -2018 merchantability or fitness for a particular purpose, arising from sale or use STORAGE of Henkel Corporations products. Henkel Corporation specifically Store product in the unopened container in a dry location. disclaims any liability for consequential or incidental damages of any kind, Storage information may be indicated on the product container including lost profits. The discussion herein of various processes or compositions isnot to be interpreted as representation that they are free from labeling. domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We Optimal Storage: 25 C (3), 50 % RH (10) for a 12 months recommend that each prospective user test hisproposed application before shelf life. Material removed from containers may be repetitive use, using thisdata as a guide. Thisproduct may be covered by one or contaminated during use. Do not return product to the original more United States or foreign patents or patent applications. container. Henkel Corporation cannot assume responsibility for Trademark usage: Except as otherwise noted Alltrademarks inthisdocument are trademarks and/or registered trademarks of Henkel and its affiliatesinthe product which has been contaminated or stored under U.S.and elsewhere. conditions other than those previously indicated. Ifadditional information is required, please contact your local Technical Service Center or Customer Service Representative. Reference 1 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225 = lb N/mm x 5.71 = lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS.The product can have a variety of different applications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons againstany hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics