Technical Data Sheet BERGQUIST GAP PAD TGP 1500 Known as BERGQUIST GAP PAD 1500 October -2020 PRODUCT DESCRIPTION TYPICAL PROPERTIES OF CURED MATERIAL ThermallyConductive, Un-Reinforced Gap FillingMaterial. Young s modulus iscalculated using 0.01in/min,step rate of strainwith a sample size 0.79inch. Technology Silicone Physical Properties Appearance Black Hardness, Shore 00, Thirty second delay value ,40 Thickness ,ASTM D374 0.508 to 5.08mm ,ASTM D374 ASTM D2240 ,Bulk rubber InherentSurface Tack 2 (1 sided) Heat Capacity ,ASTM E1269,J/g-K 1.0 Application Thermalmanagement, Density ,Bulk rubber,ASTM D792,g/cc 2.1 TIM(ThermalInterfaceMaterial) Flammability, UL 94 V-0 Operating Temperature -60 to 200C Young s Modulus ,ASTM D575 kPa 310 Range (psi) (45 ) Electrical Properties FEATURES AND BENEFITS DielectricBreakdown Voltage ,ASTM D149,VAC >6,000 ThermalConductivity: 1.5W/m-K DielectricConstant ,ASTM D150,1,000Hz 5.5 Un-reinforcedconstruction foradditional compliancy 11 Volume Resistivity ,ASTM D257,ohm-meter 110 Conformable,low hardness Thermal Properties Electricallyisolating ThermalConductivity ,ASTM D5470 ,W/(m-K) 1.5 ThermalImpedance ,0.040 inch BERGQUIST GAP PAD TGP 1500 has an idealfillerblend that 2 ASTM D5470 ,C-in /W: gives it a low-modulus characteristic that maintains optimal thermalperformanceyet stillallows foreasy handling . 10% Deflection 1.62 20% Deflection 1.5 The natural tack on both sidesofthe materialallows forgood 30% Deflection 1.33 compliance to adjacent surfacesofcomponents, minimizing interfacialresistance. The recordedvalue includes interfacialthermal resistance. These values are provided forreferenceonly. Actual application performanceis directly related to the surface roughness, flatnessand pressureapplied. TYPICAL APPLICATIONS Telecommunications Computer and peripherals GENERAL INFORMATION Power conversion For safe handling information on this product, consult the RDRAM memory modules /chip scale packages Safety Data Sheet, (SDS). Areaswhere heat needs to be transferredto a frame chassis orother type ofheat spreader Not for product specifications The technical data contained hereinareintended as reference only. Please contact your local quality department for assistance and recommendations on specifications forthis product. TDS BERGQUIST GAP PAD TGP 1500, October -2020 The data contained hereinarefurnishedforinformation only and arebelieved to CONFIGURATIONS AVAILABLE be reliable.We cannot assume responsibilityforthe resultsobtained by others BERGQUIST GAP PAD TGP 1500 isavailable in the following over whose methods we have no control. It is the user s responsibilityto configurations: determine suitability forthe user spurpose ofany production methods mentioned hereinand to adopt such precautions as may be advisable forthe protection of propertyand ofpersonsagainst any hazards that may be involved in the handling Sheet form and use thereof.In light of the foregoing,Henkel Corporation specifically Die-Cut parts disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use Natural tack both sideswith fiberglass. of Henkel Corporations products. Henkel Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions isnot to be interpretedas representation that they arefreefrom STORAGE domination of patents owned by others oras a license under any Henkel Store product in the unopened container in a dry location. Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before Storage informationmay be indicated on the product container repetitive use, using this data as a guide. Thisproduct may be covered by one or labeling. moreUnited States orforeignpatents orpatent applications. Trademark usage Optimal Storage:25C (3), 50% RH (10) fora 180-day shelf Except as otherwise noted, alltrademarksin this document aretrademarksof life.Materialremoved fromcontainers may be contaminated Henkel Corporationin the U.S. and elsewhere. denotes a trademarkregistered in the U.S. Patent and TrademarkOffice. during use. Do not return product to the originalcontainer. Henkel Corporationcannot assume responsibilityforproduct which has been contaminated orstoredunder conditions other ReferenceN/A than those previously indicated. Ifadditional information is required,please contact your local Technical Service Centeror Customer Service Representative. Conversions (C x 1.8)+ 32 =F kV/mm x 25.4 =V/mil mm /25.4 =inches N x 0.225=lb/F N/mm x 5.71=lb/in psi x 145 =N/mm MPa =N/mm Nm x 8.851 = lbin Nm x 0.738=lbft Nmm x 0.142 =ozin mPas =cP Disclaimer The information provided in this Technical Data Sheet (TDS) including the recommendations foruse and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. The product can have a variety of differentapplications as well as differingapplication and working conditions in your environment that arebeyond our control. Henkel is, therefore,not liableforthe suitability ofour product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results.We strongly recommend that you carryout your own priortrialsto confirmsuch suitability ofour product. Any liabilityin respect ofthe information in the Technical Data Sheet or any other written or oral recommendation(s) regardingthe concerned product is excluded, except if otherwise explicitly agreed and except in relation to death orpersonalinjury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: In case Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywillin no event exceed the amount ofthe concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations foruse and application of the product are based on our knowledge and experience ofthe product as at the date ofthis TDS. Henkel is, therefore,not liableforthe suitability ofour product forthe production processes and conditions in respect of which you use them, as well as the intended applications and results.We strongly recommend that you carryout your own priortrialsto confirmsuch suitability ofour product. Any liabilityin respectofthe informationin the Technical Data Sheet orany other written ororalrecommendation(s) regardingthe concerned product isexcluded, except ifotherwise explicitly agreedand except in relationto death orpersonal injurycaused by our negligence and any liabilityunder any applicablemandatory product liabilitylaw. In case products are delivered by Henkel Corporation, or Henkel Canada Corporation, the following disclaimer is applicable: For the most direct access to local sales and technical support visit: www.henkel.com/electronics