Technical Data Sheet BERGQUIST GAP PAD TGP 2200SF Known as BERGQUIST GAP PAD 2200SF April-2019 PRODUCT DESCRIPTION Physical Properties Thermally Conductive, Silicone-Free Gap FillingMaterial . Hardness, Shore 00,Thirty second delay value , 70 ASTM D2240,Bulk rubber Heat Capacity ,ASTM E1269,J/g-K 1.0 Technology Silicone free Density ,ASTM D792,g/cc 2.8 Appearance Green Reinforcement Carrier Fiberglass Flammability, UL 94 V-0 Young s Modulus ,ASTM D575 kPa 228 Thickness,ASTM D374 0.254 to 3.175mm ,ASTM D374 (psi) (33) Inherent Surface Tack 2 (2 sides) Application Thermal management, Electrical Properties TIM(Thermal Interface Material) Dielectric Breakdown Voltage ,ASTM D149,VAC >5,000 Operating Temperature -60 to 125 C Dielectric Constant ,ASTM D150 ,1,000Hz 6.0 Range 8 Volume Resistivity ,ASTM D257 ,ohm-meter 110 Thermal Properties FEATURES AND BENEFITS Thermal Conductivity ,ASTM D5470 ,W/(m-K) 2.0 Thermal Conductivity: 2.0W/m-K Silicone-free formulation Medium compliance with easy handling GENERAL INFORMATION Electrically isolating For safe handling information on this product, consult the Safety Data Sheet, (SDS). BERGQUIST GAP PAD TGP 2200SF is a thermally conductive, electrically isolating,silicone-free polymer specially Not for product specifications designed for silicone-sensitive applications. The material is The technical data contained herein are intended as reference ideal for applications with uneven topologies and highstackup only. Please contact your local quality department for tolerances . assistance and recommendations on specifications for this BERGQUIST GAP PAD TGP 2200SF isreinforced for easy product. material handlingand added durability during assembly. The material is available with a protective liner on both sides. CONFIGURATIONS AVAILABLE BERGQUIST GAP PAD TGP 2200SF issupplied with reduced BERGQUIST GAP PAD TGP 2200SF is available in the tack on one side allowing for burn-in processes and easy following configurations: rework . Sheet form Die-Cut parts Sheet size 8 x 16 TYPICAL APPLICATIONS Digitaldiskdrives Proximity near electrical contacts (e.g. DC brush motors, Natural tack both sideswith fiberglass. connectors, relays) Fiber optics modules TYPICAL PROPERTIES OF CURED MATERIAL Young s modulus iscalculated using 0.01in/min,step rate of strain with a sample size 0.79inch.TDS BERGQUIST GAP PAD TGP 2200SF, April-2019 merchantability or fitness for a particular purpose, arising from sale or use STORAGE of Henkel Corporations products. Henkel Corporation specifically Store product in the unopened container in a dry location. disclaims any liability for consequential or incidental damages of any kind, Storage information may be indicated on the product container including lost profits. The discussion herein of various processes or compositions isnot to be interpreted as representation that they are free from labeling. domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We Optimal Storage: 25 C (3), 50 % RH (10) for a 12 months recommend that each prospective user test hisproposed application before shelf life. Material removed from containers may be repetitive use, using thisdata as a guide. Thisproduct may be covered by one or contaminated during use. Do not return product to the original more United States or foreign patents or patent applications. container. Henkel Corporation cannot assume responsibility for Trademark usage: Except as otherwise noted Alltrademarks inthisdocument are trademarks and/or registered trademarks of Henkel and its affiliatesinthe product which has been contaminated or stored under U.S.and elsewhere. conditions other than those previously indicated. Ifadditional information is required, please contact your local Technical Service Center or Customer Service Representative. Reference 3 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225 = lb N/mm x 5.71 = lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS.The product can have a variety of different applications as well as differingapplication and working conditions inyour environment that are beyond our control. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) including the recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS. Henkel is, therefore, not liablefor the suitability of our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitability of our product. Any liabilityinrespect of the information inthe Technical Data Sheet or any other written or oral recommendation(s) regarding the concerned product isexcluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is applicable: The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user s responsibility to determine suitability for the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons againstany hazards that may be involved inthe handling and use thereof. Inlight of the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics