Technical DataSheet BERGQUIST GAP PAD TGP 2400 Known as BERGQUIST GAP PAD 2500S20 November -2018 PRODUCT DESCRIPTION TYPICAL APPLICATIONS Highly Conformable, Thermally Conductive, Reinforced Between processors and heat sinks S-Class Gap FillingMaterial. Between graphics chips and heat sinks DVD and CDROM electronics cooling Technology Silicone Area where heat needs to be transferred to a frame, Appearance Lightyellow chassis or other type of heat spreader Reinforcement Carrier Fiberglass Thickness ,ASTM D374 0.254 to 6.35 mm TYPICAL PROPERTIES OF CURED MATERIAL InherentSurface Tack 2 (1 side ) Young s modulus is calculated using 0.01in/min,step rate of Application Thermal management, strainwith a sample size 0.79inch. TIM(Thermal Interface Material) Physical Properties Operating Temperature -60 to 200C Hardness, Shore 00,Thirty second delay value , 20 Range ASTM D2240,Bulkrubber Heat Capacity ,ASTM E1269,J/g-K 1.0 FEATURES AND BENEFITS Density ,Bulkrubber ,ASTM D792,g/cc 3.1 Thermal Conductivity: 2.4W/m-K Flammability, UL94 V-0 Low S-Class thermal resistance at ultra-low pressures Young s Modulus ,ASTM D575 kPa 35 Ultra conformable, gel-like modulus (psi) (5 ) Designed for low-stress applications Electrical Properties Fiberglass reinforced for puncture, shear and tear Dielectric Breakdown Voltage ,ASTM D149,VAC >3,000 resistance Dielectric Constant ,ASTM D150 ,1,000Hz 6.6 11 Volume Resistivity ,ASTM D257 ,ohm-meter 110 BERGQUIST GAP PAD TGP 2400 is a thermally conductive, reinforced material rated at a thermal conductivity of 2.4W/m-K Thermal Properties . The material is a filled-polymer material yielding extremely Thermal Conductivity ,ASTM D5470 ,W/(m-K) 2.4 soft, elastic characteristics . The material is reinforced to provide easy handling,converting, added electrical isolation Thermal Impedance vs. Strain 2 (1) and tear resistance . Thermal Impedance ,C-in /W ,0.040 : 10% Deflection 0.75 BERGQUIST GAP PAD TGP 2400 is well suited for low 20% Deflection 0.68 pressure applications that typically use fixed standoff or clip 30% Deflection 0.61 mounting. BERGQUIST GAP PAD TGP 2400 maintains a conformable yet elastic nature that allows for excellent interfacingand wet-out characteristics, even to surfaces with highroughness and/or topography . (1) The ASTM D5470 test fixture was utilized. The recorded values include the interfacial thermal resistance. The values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied BERGQUIST GAP PAD TGP 2400 is offered with inherent natural tack on both sides of the material allowing for stick- in-place characteristics during application assembly .Itis also GENERAL INFORMATION available with a non-tack side . For safe handling information on this product, consult the Please see the Standard Options section for description . Safety Data Sheet, (SDS). BERGQUIST GAP PAD TGP 2400 is supplied with protective liners on both sides .The top side has reduced tack for ease of Not for product specifications handling. The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product.TDS BERGQUIST GAP PAD TGP 2400, November -2018 applicable: CONFIGURATIONS AVAILABLE The data contained herein are furnishedfor informationonly and are believed to BERGQUIST GAP PAD TGP 2400 is available in the be reliable. We cannot assume responsibility for the results obtained by others following configurations: over whose methods we have no control. Itis the user s responsibility to determine suitabilityfor the user s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of Sheet form and die-cut parts property and of persons againstany hazards thatmay be involved inthe handling and use thereof. Inlightof the foregoing, Henkel Corporation specifically disclaims all warranties expressed or implied, including warranties of STORAGE merchantability or fitness for a particular purpose, arising from sale or use of Henkel Corporations products. Henkel Corporation specifically Store product in the unopened container in a dry location. disclaims any liability for consequential or incidental damages of any kind, Storage informationmay be indicated on the product container including lost profits. The discussion herein of various processes or labeling. compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any Henkel Corporation patents that may cover such processes or compositions. We Optimal Storage: 25 C (3), 50 % RH (10) for a 12 months recommend that each prospective user test his proposed application before shelf life. Material removed from containers may be repetitive use, usingthisdata as a guide.Thisproduct may be covered by one or contaminated during use. Do not return product to the original more United States or foreign patents or patent applications. container. Henkel Corporation cannot assume responsibility for Trademark usage: Except as otherwise noted Alltrademarks inthisdocument product which has been contaminated or stored under are trademarks and/or registered trademarks of Henkel and its affiliatesinthe U.S.and elsewhere. conditions other thanthose previously indicated.Ifadditional information is required, please contact your local Technical Service Center or Customer Service Representative. Reference 1 Conversions (C x 1.8)+ 32 = F kV/mm x 25.4 = V/mil mm /25.4 = inches Nx 0.225 = lb N/mm x 5.71 = lb/in psi x 145 = N/mm MPa = N/mm Nm x 8.851 = lbin Nm x 0.738= lbft Nmm x 0.142= ozin mPas = cP Disclaimer Note: The information provided in this Technical Data Sheet (TDS) includingthe recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS.The product can have a variety of different applications as well as differingapplication and working conditions inyour environment thatare beyond our control. Henkel is, therefore, not liablefor the suitabilityof our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitabilityof our product. Any liabilityinrespect of the informationinthe Technical DataSheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Belgium NV, Henkel Electronic Materials NV, Henkel Nederland BV, Henkel Technologies France SAS and Henkel France SA please additionally note the following: Incase Henkel would be nevertheless held liable,on whatever legal ground, Henkels liabilitywill inno event exceed the amount of the concerned delivery. In case products are delivered by Henkel Colombiana, S.A.S.the following disclaimer is applicable: The information provided in this Technical Data Sheet (TDS) includingthe recommendations for use and application of the product are based on our knowledge and experience of the product as at the date of thisTDS. Henkel is, therefore, not liablefor the suitabilityof our product for the production processes and conditions in respect of which you use them, as well as the intended applications and results. We strongly recommend that you carry out your own prior trialsto confirm such suitabilityof our product. Any liabilityinrespect of the informationinthe Technical DataSheet or any other written or oral recommendation(s) regarding the concerned product is excluded, except ifotherwise explicitly agreed and except inrelation to death or personal injury caused by our negligence and any liabilityunder any applicable mandatory product liabilitylaw. In case products are delivered by Henkel Corporation, Resin Technology Group, Inc., or Henkel Canada Corporation, the following disclaimer is Americas Europe Asia +1.888.943.6535 +32.1457.5611 +86.21.3898.4800 For the most direct access to local sales and technical support visit: www.henkel.com/electronics